Okerr remote network sensor
PIPX_HOME=/opt/pipx PIPX_BIN_DIR=/usr/local/bin pipx install git+https://github.com/yaroslaff/sensor/
PIPX_HOME=/opt/pipx PIPX_BIN_DIR=/usr/local/bin pipx reinstall okerrsensor
# or simpler
pipx install git+https://github.com/yaroslaff/sensor/or (old way):
pip3 install git+https://github.com/yaroslaff/sensor/
configure /etc/okerrclient.conf
Prepare env config file:
root@deb10:~# cat /etc/okerr/env/sensor
[email protected]
RMQ_USER=okerr-rabbit-user
RMQ_PASS=okerr-rabbit-secret-password
RMQ_VHOST=okerr
RMQ_HOST=rabbitmq.example.com
SENSOR_IP=1.2.3.4
## only for local debugging
#SENSOR_PEM=.local/ssl/client.pem
# SENSOR_CAPEM=.local/ssl/ca.pem
export SENSOR_NAME RMQ_HOST RMQ_VHOST RMQ_USER RMQ_PASS SENSOR_PEM SENSOR_CAPEM
$ cp .env-example .env
$ vim .env # Adjust settings
$ . .env
$ sudo sensor.py
20191228 01:09:35 started sensor [email protected]Specify check from CLI:
sensor --manual httpstatus url=https://cat.okerr.com/ status=200 options=addr=88.214.35.64
mkdir /var/log/okerr
cp /usr/local/okerrsensor/okerr-sensor.service /etc/systemd/system/
systemctl daemon-reload
systemctl enable okerr-sensor
systemctl start okerr-sensor
Use --oneprocess option, or set env variable SENSOR_ONEPROCESS to any non-empty value (e.g. in /etc/okerr/env/sensor)
git clone [email protected]:yaroslaff/sensor.git
python3 setup.py bdist_wheel