add more potential exitnode ips to home nodes

[jhpoelen]

Currently, home nodes are configured with a single exit node ip / port.

We'd like to include a list of ip addresses, so that we can run (or spin up) exitnodes behind IPs that we control.

[jhpoelen]

room.sudoroom.org: 142.254.26.9
sudoroom.org: 104.236.181.202
omnicommons.org: 104.131.158.147
peoplesopen.net: 107.170.219.5
exit1.sudomesh.org: 104.236.181.226

[jhpoelen]

Here's an example config from /etc/config/tunneldigger

config broker 'main'
       list address '104.236.181.226:8942'
       list address '104.236.181.226:8943'
       list address '45.34.140.42:8942'
       list address '45.34.140.42:8943'
       list address '142.254.26.9:8942'
       list address '104.236.181.202:8942'
       list address '104.131.158.147:8942'
       list address '107.170.219.5:8942'
       option uuid 'XXXXXX'
       option interface 'l2tp0'
       option bind_to_interface 'eth1'
       option limit_bw_down '2048kbit'
       option limit_bw_up '2048kbit'
       option hook_script '/opt/mesh/tunnel_hook'

[paidforby]

Can be addressed in makenode. The exit node IP is currently buried in configs/config.js. I'd rather hardcode these new exit nodes into /etc/config/tunneldigger because it seems more obvious to me and it will help in preparing for the deprecation of makenode, sudomesh/makenode#19. Additionally, I'd like see options of exit nodes chosen through peoplesopen-dash, not obscured inside of a js file.

[jhpoelen]

Sounds good to me. Ideally, we'd have a way to mesh the registry itself, allowing for exit nodes to join and leave a list of trusted exit nodes for a particular project like peoplesopen.net or somethingotheropen.net .

[paidforby]

remote patch for this bug is now available for TESTING, this should NOT be executed on the "real" exitnode until further testing has be completed. Find the patch and instructions for execution in the makenode repo here, https://github.com/sudomesh/makenode/tree/master/patches

[gobengo]

If we need more exit nodes, here is a script to make more exitnodes: https://gitlab.ops.bengo.is/ben/mesh-network#digitalocean-exitnode

This week I'll test my exitnodes I made, and if they work I'll post an IP that we can add to the firmware if needed.