keybored

[1] tl;dr if you want to fire it up now

Assuming that you have the dependencies installed:

Clone or download the repository.

Run the following:

$ cd to the download directory
$ export FLASK_APP=application.py
$ flask run

* Serving Flask-SocketIO app "application.py"
* Forcing debug mode off
* Serving Flask app "application.py"
* Environment: production
 WARNING: Do not use the development server in a production environment.
 Use a production WSGI server instead.
* Debug mode: off
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)

now go to http://127.0.0.1:5000/

and voila! The application is served.

In case any error shows up, it should be because you do not have flask installed. Follow the installation instructions. If any other errors show up go here.

Please note that the above will only allow you to play using the keyboard and mouse. For playing via the Arduino CapacitiveTouch integration you need additional setup as below:

[2] Integrating the Arduino CapacitiveTouch

Note: This circuit will work only with the following Arduino types: Leonardo, Esplora, Zero, Due and MKR family. We tested with Arduino Nano, it didn't work :P. So, use Leonardo or the like.

* Wire the circuit as shown:

* Download the CapacitiveSensor library in your Arduino IDE.
* Open touch.ino
* Upload the code
* Now follow [1]