libbpf: add support for canceling cached_cons advance #397
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
It is possible to fail receiving packets after calling xsk_ring_cons__peek, at this condition, cached_cons has been advanced, should be cancelled. Signed-off-by: Li RongQing <[email protected]>
|
Master branch: 537cf4e |
|
At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=389089 expired. Closing PR. |
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 4, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 5, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 8, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 8, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 8, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 8, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Jul 8, 2024
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch: ''' test_d_path_basic:PASS:setup 0 nsec libbpf: prog 'prog_stat': failed to attach: unknown error (-524) libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524 #77/1 d_path/basic:FAIL #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:FAIL ... ... test_module_attach:PASS:skel_open 0 nsec test_module_attach:PASS:set_attach_target 0 nsec test_module_attach:PASS:set_attach_target_explicit 0 nsec test_module_attach:PASS:skel_load 0 nsec libbpf: prog 'handle_fentry': failed to attach: unknown error (-524) libbpf: prog 'handle_fentry': failed to auto-attach: -524 test_module_attach:FAIL:skel_attach skeleton attach failed: -524 #167 module_attach:FAIL ... ... ringbuf_subtest:PASS:skel_open 0 nsec ringbuf_subtest:PASS:skel_load 0 nsec ringbuf_subtest:PASS:rw_cons_pos 0 nsec ringbuf_subtest:PASS:rw_extend 0 nsec ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec ringbuf_subtest:PASS:unmap_rw 0 nsec ringbuf_subtest:PASS:wr_prod_pos 0 nsec ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec ringbuf_subtest:PASS:wr_data_page_one 0 nsec ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec ringbuf_subtest:PASS:wr_data_page_two 0 nsec ringbuf_subtest:PASS:wr_data_page_all 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ro_prod_pos 0 nsec ringbuf_subtest:PASS:write_protect 0 nsec ringbuf_subtest:PASS:exec_protect 0 nsec ringbuf_subtest:PASS:ro_remap 0 nsec ringbuf_subtest:PASS:unmap_ro 0 nsec ringbuf_subtest:PASS:ringbuf_create 0 nsec ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1 #277/1 ringbuf/ringbuf:FAIL #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:FAIL ... ... test_test_bprm_opts:PASS:skel_load 0 nsec libbpf: prog 'secure_exec': failed to attach: unknown error (-524) libbpf: prog 'secure_exec': failed to auto-attach: -524 test_test_bprm_opts:FAIL:attach attach failed: -524 #382 test_bprm_opts:FAIL ... ... test_test_ima:PASS:skel_load 0 nsec test_test_ima:PASS:ringbuf 0 nsec libbpf: prog 'bprm_committed_creds': failed to attach: \ unknown error (-524) libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524 test_test_ima:FAIL:attach attach failed: -524 #384 test_ima:FAIL ... ... test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec test_trace_ext:PASS:setup 0 nsec libbpf: prog 'test_pkt_md_access_new': failed to attach: \ unknown error (-524) libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524 #397 trace_ext:FAIL ''' This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like: ''' #77/1 d_path/basic:SKIP #77/2 d_path/check_rdonly_mem:OK #77/3 d_path/check_alloc_mem:OK #77 d_path:OK (SKIP: 1/3) ... ... #167 module_attach:SKIP ... ... #277/1 ringbuf/ringbuf:SKIP #277/2 ringbuf/ringbuf_n:SKIP #277/3 ringbuf/ringbuf_map_key:SKIP #277 ringbuf:SKIP ... ... #382 test_bprm_opts:SKIP ... ... #384 test_ima:SKIP ... ... #397 trace_ext:SKIP ''' Signed-off-by: Geliang Tang <[email protected]>
chentao-kernel
pushed a commit
to chentao-kernel/bpf
that referenced
this pull request
Sep 8, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec kernel-patches#397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 8, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 8, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 8, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 9, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 9, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 11, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 11, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 15, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 17, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 17, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 17, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 18, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 19, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 19, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 19, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
kernel-patches-daemon-bpf bot
pushed a commit
that referenced
this pull request
Sep 19, 2025
... test_stacktrace_map:PASS:compare_stack_ips stackmap vs. stack_amap 0 nsec test_stacktrace_map:PASS:stack_key_map lookup 0 nsec test_stacktrace_map:PASS:stackmap lookup and detele 0 nsec test_stacktrace_map:PASS:stackmap lookup deleted stack_id 0 nsec #397 stacktrace_map:OK ... Signed-off-by: Tao Chen <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Pull request for series with
subject: libbpf: add support for canceling cached_cons advance
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=389089