chore(deps): update pnpm to v10 #3116

renovate · 2025-03-24T02:33:24Z

This PR contains the following updates:

Package	Change	Age	Confidence
pnpm (source)	`9.11.0` -> `10.19.0`

Warning

Some dependencies could not be looked up. Check the Dependency Dashboard for more information.

Release Notes

pnpm/pnpm (pnpm)

`v10.19.0`

Compare Source

Minor Changes

You can now allow specific versions of dependencies to run postinstall scripts. onlyBuiltDependencies now accepts package names with lists of trusted versions. For example:
```
onlyBuiltDependencies:
  - [email protected] || 21.6.5
  - [email protected]
```
Related PR: #10104.
Added support for exact versions in minimumReleaseAgeExclude #9985.

You can now list one or more specific versions that pnpm should allow to install, even if those versions don’t satisfy the maturity requirement set by minimumReleaseAge. For example:
```
minimumReleaseAge: 1440
minimumReleaseAgeExclude:
  - [email protected]
  - [email protected] || 5.102.1
```

`v10.18.3`

Compare Source

Patch Changes

Fix a bug where pnpm would infinitely recurse when using verifyDepsBeforeInstall: install and pre/post install scripts that called other pnpm scripts #10060.
Fixed scoped registry keys (e.g., @scope:registry) being parsed as property paths in pnpm config get when --location=project is used #9362.
Remove pnpm-specific CLI options before passing to npm publish to prevent "Unknown cli config" warnings #9646.
Fixed EISDIR error when bin field points to a directory #9441.
Preserve version and hasBin for variations packages #10022.
Fixed pnpm config set --location=project incorrectly handling keys with slashes (auth tokens, registry settings) #9884.
When both pnpm-workspace.yaml and .npmrc exist, pnpm config set --location=project now writes to pnpm-workspace.yaml (matching read priority) #10072.
Prevent a table width error in pnpm outdated --long #10040.
Sync bin links after injected dependencies are updated by build scripts. This ensures that binaries created during build processes are properly linked and accessible to consuming projects #10057.

`v10.18.2`

Compare Source

Patch Changes

pnpm outdated --long should work #10040.
Replace ndjson with split2. Reduce the bundle size of pnpm CLI #10054.
pnpm dlx should request the full metadata of packages, when minimumReleaseAge is set #9963.
pnpm version switching should work when the pnpm home directory is in a symlinked directory #9715.
Fix EPIPE errors when piping output to other commands #10027.

`v10.18.1`

Compare Source

Patch Changes

Don't print a warning, when --lockfile-only is used #8320.
pnpm setup creates a command shim to the pnpm executable. This is needed to be able to run pnpm self-update on Windows #5700.
When using pnpm catalogs and running a normal pnpm install, pnpm produced false positive warnings for "skip adding to the default catalog because it already exists". This warning now only prints when using pnpm add --save-catalog as originally intended.

`v10.18.0`

Compare Source

Minor Changes

Added network performance monitoring to pnpm by implementing warnings for slow network requests, including both metadata fetches and tarball downloads.

Added configuration options for warning thresholds: fetchWarnTimeoutMs and fetchMinSpeedKiBps.
Warning messages are displayed when requests exceed time thresholds or fall below speed minimums

Related PR: #10025.

Patch Changes

Retry filesystem operations on EAGAIN errors #9959.
Outdated command respects minimumReleaseAge configuration #10030.
Correctly apply the cleanupUnusedCatalogs configuration when removing dependent packages.
Don't fail with a meaningless error when scriptShell is set to false #8748.
pnpm dlx should not fail when minimumReleaseAge is set #10037.

`v10.17.1`

Compare Source

Patch Changes

When a version specifier cannot be resolved because the versions don't satisfy the minimumReleaseAge setting, print this information out in the error message #9974.
Fix state.json creation path when executing pnpm patch in a workspace project #9733.
When minimumReleaseAge is set and the latest tag is not mature enough, prefer a non-deprecated version as the new latest #9987.

`v10.17.0`

Compare Source

Minor Changes

The minimumReleaseAgeExclude setting now supports patterns. For instance:
```
minimumReleaseAge: 1440
minimumReleaseAgeExclude:
  - "@&#8203;eslint/*"
```
Related PR: #9984.

Patch Changes

Don't ignore the minimumReleaseAge check, when the package is requested by exact version and the packument is loaded from cache #9978.
When minimumReleaseAge is set and the active version under a dist-tag is not mature enough, do not downgrade to a prerelease version in case the original version wasn't a prerelease one #9979.

`v10.16.1`

Compare Source

Patch Changes

The full metadata cache should be stored not at the same location as the abbreviated metadata. This fixes a bug where pnpm was loading the abbreviated metadata from cache and couldn't find the "time" field as a result #9963.
Forcibly disable ANSI color codes when generating patch diff #9914.

`v10.16.0`

Compare Source

Minor Changes

There have been several incidents recently where popular packages were successfully attacked. To reduce the risk of installing a compromised version, we are introducing a new setting that delays the installation of newly released dependencies. In most cases, such attacks are discovered quickly and the malicious versions are removed from the registry within an hour.

The new setting is called minimumReleaseAge. It specifies the number of minutes that must pass after a version is published before pnpm will install it. For example, setting minimumReleaseAge: 1440 ensures that only packages released at least one day ago can be installed.

If you set minimumReleaseAge but need to disable this restriction for certain dependencies, you can list them under the minimumReleaseAgeExclude setting. For instance, with the following configuration pnpm will always install the latest version of webpack, regardless of its release time:
```
minimumReleaseAgeExclude:
  - webpack
```
Related issue: #9921.
Added support for finders #9946.

In the past, pnpm list and pnpm why could only search for dependencies by name (and optionally version). For example:
```
pnpm why minimist
```
prints the chain of dependencies to any installed instance of minimist:
```
verdaccio 5.20.1
├─┬ handlebars 4.7.7
│ └── minimist 1.2.8
└─┬ mv 2.1.1
  └─┬ mkdirp 0.5.6
    └── minimist 1.2.8
```
What if we want to search by other properties of a dependency, not just its name? For instance, find all packages that have react@17 in their peer dependencies?

This is now possible with "finder functions". Finder functions can be declared in .pnpmfile.cjs and invoked with the --find-by=<function name> flag when running pnpm list or pnpm why.

Let's say we want to find any dependencies that have React 17 in peer dependencies. We can add this finder to our .pnpmfile.cjs:
```
module.exports = {
  finders: {
    react17: (ctx) => {
      return ctx.readManifest().peerDependencies?.react === "^17.0.0";
    },
  },
};
```
Now we can use this finder function by running:
```
pnpm why --find-by=react17
```
pnpm will find all dependencies that have this React in peer dependencies and print their exact locations in the dependency graph.
```
@&#8203;apollo/client 4.0.4
├── @&#8203;graphql-typed-document-node/core 3.2.0
└── graphql-tag 2.12.6
```
It is also possible to print out some additional information in the output by returning a string from the finder. For example, with the following finder:
```
module.exports = {
  finders: {
    react17: (ctx) => {
      const manifest = ctx.readManifest();
      if (manifest.peerDependencies?.react === "^17.0.0") {
        return `license: ${manifest.license}`;
      }
      return false;
    },
  },
};
```
Every matched package will also print out the license from its package.json:
```
@&#8203;apollo/client 4.0.4
├── @&#8203;graphql-typed-document-node/core 3.2.0
│   license: MIT
└── graphql-tag 2.12.6
    license: MIT
```

Patch Changes

Fix deprecation warning printed when executing pnpm with Node.js 24 #9529.
Throw an error if nodeVersion is not set to an exact semver version #9934.
pnpm publish should be able to publish a .tar.gz file #9927.
Canceling a running process with Ctrl-C should make pnpm run return a non-zero exit code #9626.

`v10.15.1`

Compare Source

Patch Changes

Fix .pnp.cjs crash when importing subpath #9904.
When resolving peer dependencies, pnpm looks whether the peer dependency is present in the root workspace project's dependencies. This change makes it so that the peer dependency is correctly resolved even from aliased npm-hosted dependencies or other types of dependencies #9913.

`v10.15.0`

Compare Source

Minor Changes

Added the cleanupUnusedCatalogs configuration. When set to true, pnpm will remove unused catalog entries during installation #9793.
Automatically load pnpmfiles from config dependencies that are named @*/pnpm-plugin-* #9780.
pnpm config get now prints an INI string for an object value #9797.
pnpm config get now accepts property paths (e.g. pnpm config get catalog.react, pnpm config get .catalog.react, pnpm config get 'packageExtensions["@babel/parser"].peerDependencies["@babel/types"]'), and pnpm config set now accepts dot-leading or subscripted keys (e.g. pnpm config set .ignoreScripts true).
pnpm config get --json now prints a JSON serialization of config value, and pnpm config set --json now parses the input value as JSON.

Patch Changes

Semi-breaking. When automatically installing missing peer dependencies, prefer versions that are already present in the direct dependencies of the root workspace package #9835.
When executing the pnpm create command, must verify whether the node version is supported even if a cache already exists #9775.
When making requests for the non-abbreviated packument, add */* to the Accept header to avoid getting a 406 error on AWS CodeArtifact #9862.
The standalone exe version of pnpm works with glibc 2.26 again #9734.
Fix a regression in which pnpm dlx pkg --help doesn't pass --help to pkg #9823.

`v10.14.0`

Compare Source

Minor Changes

Added support for JavaScript runtime resolution

Declare Node.js, Deno, or Bun in devEngines.runtime (inside package.json) and let pnpm download and pin it automatically.

Usage example:
```
{
  "devEngines": {
    "runtime": {
      "name": "node",
      "version": "^24.4.0",
      "onFail": "download" (we only support the "download" value for now)
    }
  }
}
```
How it works:
1. pnpm install resolves your specified range to the latest matching runtime version.
2. The exact version (and checksum) is saved in the lockfile.
3. Scripts use the local runtime, ensuring consistency across environments.
Why this is better:
1. This new setting supports also Deno and Bun (vs. our Node-only settings useNodeVersion and executionEnv.nodeVersion)
2. Supports version ranges (not just a fixed version).
3. The resolved version is stored in the pnpm lockfile, along with an integrity checksum for future validation of the Node.js content's validity.
4. It can be used on any workspace project (like executionEnv.nodeVersion). So, different projects in a workspace can use different runtimes.
5. For now devEngines.runtime setting will install the runtime locally, which we will improve in future versions of pnpm by using a shared location on the computer.
Related PR: #9755.
Add --cpu, --libc, and --os to pnpm install, pnpm add, and pnpm dlx to customize supportedArchitectures via the CLI #7510.

Patch Changes

Fix a bug in which pnpm add downloads packages whose libc differ from pnpm.supportedArchitectures.libc.
The integrities of the downloaded Node.js artifacts are verified #9750.
Allow dlx to parse CLI flags and options between the dlx command and the command to run or between the dlx command and -- #9719.
pnpm install --prod should removing hoisted dev dependencies #9782.
Fix an edge case bug causing local tarballs to not re-link into the virtual store. This bug would happen when changing the contents of the tarball without renaming the file and running a filtered install.
Fix a bug causing pnpm install to incorrectly assume the lockfile is up to date after changing a local tarball that has peers dependencies.

`v10.13.1`

Compare Source

Patch Changes

Run user defined pnpmfiles after pnpmfiles of plugins.

`v10.13.0`

Compare Source

Minor Changes

Added the possibility to load multiple pnpmfiles. The pnpmfile setting can now accept a list of pnpmfile locations #9702.
pnpm will now automatically load the pnpmfile.cjs file from any config dependency named @pnpm/plugin-* or pnpm-plugin-* #9729.

The order in which config dependencies are initialized should not matter — they are initialized in alphabetical order. If a specific order is needed, the paths to the pnpmfile.cjs files in the config dependencies can be explicitly listed using the pnpmfile setting in pnpm-workspace.yaml.

Patch Changes

When patching dependencies installed via pkg.pr.new, treat them as Git tarball URLs #9694.
Prevent conflicts between local projects' config and the global config in dangerouslyAllowAllBuilds, onlyBuiltDependencies, onlyBuiltDependenciesFile, and neverBuiltDependencies #9628.
Sort keys in pnpm-workspace.yaml with deep #9701.
The pnpm rebuild command should not add pkgs included in ignoredBuiltDependencies to ignoredBuilds in node_modules/.modules.yaml #9338.
Replaced shell-quote with shlex for quoting command arguments #9381.

`v10.12.4`

Compare Source

Patch Changes

Fix pnpm licenses command for local dependencies #9583.
Fix a bug in which pnpm ls --filter=not-exist --json prints nothing instead of an empty array #9672.
Fix a deadlock that sometimes happens during peer dependency resolution #9673.
Running pnpm install after pnpm fetch should hoist all dependencies that need to be hoisted.
Fixes a regression introduced in [v10.12.2] by [#9648]; resolves [#9689].

[v10.12.2]: https://github.com/pnpm/pnpm/releases/tag/v10.12.2Add commentMore actions
[#9648]: #9648
[#9689]: #9689

`v10.12.3`

Compare Source

Patch Changes

Restore hoisting of optional peer dependencies when installing with an outdated lockfile.
Regression introduced in v10.12.2 by #9648; resolves #9685.

`v10.12.2`

Compare Source

Patch Changes

Fixed hoisting with enableGlobalVirtualStore set to true #9648.
Fix the --help and -h flags not working as expected for the pnpm create command.
The dependency package path output by the pnpm licenses list --json command is incorrect.
Fix a bug in which pnpm deploy fails due to overridden dependencies having peer dependencies causing ERR_PNPM_OUTDATED_LOCKFILE #9595.

`v10.12.1`

Minor Changes

Experimental. Added support for global virtual stores. When enabled, node_modules contains only symlinks to a central virtual store, rather to node_modules/.pnpm. By default, this central store is located at <store-path>/links (you can find the store path by running pnpm store path).

In the central virtual store, each package is hard linked into a directory whose name is the hash of its dependency graph. This allows multiple projects on the system to symlink shared dependencies from this central location, significantly improving installation speed when a warm cache is available.

This is conceptually similar to how NixOS manages packages, using dependency graph hashes to create isolated and reusable package directories.

To enable the global virtual store, set enableGlobalVirtualStore: true in your root pnpm-workspace.yaml, or globally via:
```
pnpm config -g set enable-global-virtual-store true
```
NOTE: In CI environments, where caches are typically cold, this setting may slow down installation. pnpm automatically disables the global virtual store when running in CI.

Related PR: #8190

The pnpm update command now supports updating catalog: protocol dependencies and writes new specifiers to pnpm-workspace.yaml.
Added two new CLI options (--save-catalog and --save-catalog-name=<name>) to pnpm add to save new dependencies as catalog entries. catalog: or catalog:<name> will be added to package.json and the package specifier will be added to the catalogs or catalog[<name>] object in pnpm-workspace.yaml #9425.
Semi-breaking. The keys used for side-effects caches have changed. If you have a side-effects cache generated by a previous version of pnpm, the new version will not use it and will create a new cache instead #9605.
Added a new setting called ci for explicitly telling pnpm if the current environment is a CI or not.

Patch Changes

Sort versions printed by pnpm patch using semantic versioning rules.
Improve the way the error message displays mismatched specifiers. Show differences instead of 2 whole objects #9598.
Revert #9574 to fix a regression #9596.

`v10.11.1`

Compare Source

Patch Changes

Fix an issue in which pnpm deploy --legacy creates unexpected directories when the root package.json has a workspace package as a peer dependency #9550.
Dependencies specified via a URL that redirects will only be locked to the target if it is immutable, fixing a regression when installing from GitHub releases. (#9531)
Installation should not exit with an error if strictPeerDependencies is true but all issues are ignored by peerDependencyRules #9505.
Use pnpm_config_ env variables instead of npm_config_ #9571.
Fix a regression (in v10.9.0) causing the --lockfile-only flag on pnpm update to produce a different pnpm-lock.yaml than an update without the flag.
Let pnpm deploy work in repos with overrides when inject-workspace-packages=true #9283.
Fixed the problem of path loss caused by parsing URL address. Fixes a regression shipped in pnpm v10.11 via #9502.
pnpm -r --silent run should not print out section #9563.

`v10.11.0`

Compare Source

Minor Changes

A new setting added for pnpm init to create a package.json with type=module, when init-type is module. Works as a flag for the init command too #9463.
Added support for Nushell to pnpm setup #6476.
Added two new flags to the pnpm audit command, --ignore and --ignore-unfixable #8474.

Ignore all vulnerabilities that have no solution:
```
> pnpm audit --ignore-unfixable
```
Provide a list of CVE's to ignore those specifically, even if they have a resolution.
```
> pnpm audit --ignore=CVE-2021-1234 --ignore=CVE-2021-5678
```
Added support for recursively running pack in every project of a workspace #4351.

Now you can run pnpm -r pack to pack all packages in the workspace.

Patch Changes

pnpm version management should work, when dangerouslyAllowAllBuilds is set to true #9472.
pnpm link should work from inside a workspace #9506.
Set the default workspaceConcurrency to Math.min(os.availableParallelism(), 4) #9493.
Installation should not exit with an error if strictPeerDependencies is true but all issues are ignored by peerDependencyRules #9505.
Read updateConfig from pnpm-workspace.yaml #9500.
Add support for recursive pack
Remove url.parse usage to fix warning on Node.js 24 #9492.
pnpm run should be able to run commands from the workspace root, if ignoreScripts is set tot true #4858.

`v10.10.0`

Compare Source

Minor Changes

Allow loading the preResolution, importPackage, and fetchers hooks from local pnpmfile.

Patch Changes

Fix cd command, when shellEmulator is true #7838.
Sort keys in pnpm-workspace.yaml #9453.
Pass the npm_package_json environment variable to the executed scripts #9452.
Fixed a mistake in the description of the --reporter=silent option.

`v10.9.0`

Compare Source

Minor Changes

Added support for installing JSR packages. You can now install JSR packages using the following syntax:
```
pnpm add jsr:<pkg_name>
```
or with a version range:
```
pnpm add jsr:<pkg_name>@&#8203;<range>
```
For example, running:
```
pnpm add jsr:@&#8203;foo/bar
```
will add the following entry to your package.json:
```
{
  "dependencies": {
    "@&#8203;foo/bar": "jsr:^0.1.2"
  }
}
```
When publishing, this entry will be transformed into a format compatible with npm, older versions of Yarn, and previous pnpm versions:
```
{
  "dependencies": {
    "@&#8203;foo/bar": "npm:@&#8203;jsr/foo__bar@^0.1.2"
  }
}
```
Related issue: #8941.

Note: The @jsr scope defaults to https://npm.jsr.io/ if the @jsr:registry setting is not defined.
Added a new setting, dangerouslyAllowAllBuilds, for automatically running any scripts of dependencies without the need to approve any builds. It was already possible to allow all builds by adding this to pnpm-workspace.yaml:
```
neverBuiltDependencies: []
```
dangerouslyAllowAllBuilds has the same effect but also allows to be set globally via:
```
pnpm config set dangerouslyAllowAllBuilds true
```
It can also be set when running a command:
```
pnpm install --dangerously-allow-all-builds
```

Patch Changes

Fix a false negative in verifyDepsBeforeRun when nodeLinker is hoisted and there is a workspace package without dependencies and node_modules directory #9424.
Explicitly drop verifyDepsBeforeRun support for nodeLinker: pnp. Combining verifyDepsBeforeRun and nodeLinker: pnp will now print a warning.

`v10.8.1`

Compare Source

Patch Changes

Removed bright white highlighting, which didn't look good on some light themes #9389.
If there is no pnpm related configuration in package.json, onlyBuiltDependencies will be written to pnpm-workspace.yaml file #9404.

`v10.8.0`

Compare Source

Minor Changes

Experimental. A new hook is supported for updating configuration settings. The hook can be provided via .pnpmfile.cjs. For example:

module.exports = {
  hooks: {
    updateConfig: (config) => ({
      ...config,
      nodeLinker: "hoisted",
    }),
  },
};

Now you can use the pnpm add command with the --config flag to install new configurational dependencies #9377.

Patch Changes

Do not hang indefinitely, when there is a glob that starts with !/ in pnpm-workspace.yaml. This fixes a regression introduced by #9169.
pnpm audit --fix should update the overrides in pnpm-workspace.yaml.
pnpm link should update overrides in pnpm-workspace.yaml, not in package.json #9365.

`v10.7.1`

Compare Source

Patch Changes

pnpm config set should convert the settings to their correct type before adding them to pnpm-workspace.yaml #9355.
pnpm config get should read auth related settings via npm CLI #9345.
Replace leading ~/ in a path in .npmrc with the home directory #9217.

`v10.7.0`

Compare Source

Minor Changes

pnpm config get and list also show settings set in pnpm-workspace.yaml files #9316.
It should be possible to use env variables in pnpm-workspace.yaml setting names and value.
Add an ability to patch dependencies by version ranges. Exact versions override version ranges, which in turn override name-only patches. Version range * is the same as name-only, except that patch application failure will not be ignored.

For example:
```
patchedDependencies:
  foo: patches/foo-1.patch
  foo@^2.0.0: patches/foo-2.patch
  [email protected]: patches/foo-3.patch
```
The above configuration would apply patches/foo-3.patch to [email protected], patches/foo-2.patch to all foo versions which satisfy ^2.0.0 except 2.1.0, and patches/foo-1.patch to the remaining foo versions.
[!WARNING]
The version ranges should not overlap. If you want to specialize a sub range, make sure to exclude it from the other keys. For example:
```
# pnpm-workspace.yaml
patchedDependencies:
  # the specialized sub range
  '[email protected]': patches/foo.2.2.0-2.8.0.patch
  # the more general patch, excluding the sub range above
  'foo@>=2.0.0 <2.2.0 || >2.8.0': 'patches/foo.gte2.patch
```
In most cases, however, it's sufficient to just define an exact version to override the range.
pnpm config set --location=project saves the setting to a pnpm-workspace.yaml file if no .npmrc file is present in the directory #9316.
Rename pnpm.allowNonAppliedPatches to pnpm.allowUnusedPatches. The old name is still supported but it would print a deprecation warning message.
Add pnpm.ignorePatchFailures to manage whether pnpm would ignore patch application failures.

If ignorePatchFailures is not set, pnpm would throw an error when patches with exact versions or version ranges fail to apply, and it would ignore failures from name-only patches.

If ignorePatchFailures is explicitly set to false, pnpm would throw an error when any type of patch fails to apply.

If ignorePatchFailures is explicitly set to true, pnpm would print a warning when any type of patch fails to apply.

Patch Changes

Remove dependency paths from audit output to prevent out-of-memory errors #9280.

`v10.6.5`

Compare Source

Patch Changes

Remove warnings after having explicitly approved no builds #9296.
When installing different dependency packages, should retain the ignoredBuilds field in the .modules.yaml file #9240.
Fix usages of the catalog: protocol in injected local workspace packages. This previously errored with ERR_PNPM_SPEC_NOT_SUPPORTED_BY_ANY_RESOLVER. #8715
Setting workspace-concurrency to less than or equal to 0 should work #9297.

`v10.6.4`

Compare Source

Patch Changes

Fix pnpm dlx with --allow-build flag #9263.
Invalid Node.js version in use-node-version should not cause pnpm itself to break #9276.
The max amount of workers running for linking packages from the store has been reduced to 4 to achieve optimal results #9286. The workers are performing many file system operations, so increasing the number of CPUs doesn't help performance after some point.

`v10.6.3`

Compare Source

Patch Changes

pnpm install --prod=false should not crash, when executed in a project with a pnpm-workspace.yaml file #9233. This fixes regression introduced via #9211.
Add the missing node-options config to recursive run #9180.
Removed a branching code path that only executed when dedupe-peer-dependents=false. We believe this internal refactor will not result in behavior changes, but we expect it to make future pnpm versions behave more consistently for projects that override dedupe-peer-dependents to false. There should be less unique bugs from turning off dedupe-peer-dependents.

See details in #9259.

`v10.6.2`

Compare Source

Patch Changes

pnpm self-update should always update the version in the packageManager field of package.json.
Fix running pnpm CLI from pnpm CLI on Windows when the CLI is bundled to an executable #8971.
pnpm patch-commit will now use the same filesystem as the store directory to compare and create patch files.
Don't show info output when --loglevel=error is used.
peerDependencyRules should be set in pnpm-workspace.yaml to take effect.

`v10.6.1`

Compare Source

Patch Changes

The pnpm CLI process should not stay hanging, when --silent reporting is used.
When --loglevel is set to error, don't show installation summary, execution time, and big tarball download progress.
Don't ignore pnpm.patchedDependencies from package.json #9226.
When executing the approve-builds command, if package.json contains onlyBuiltDependencies or ignoredBuiltDependencies, the selected dependency package will continue to be written into package.json.
When a package version cannot be found in the package metadata, print the registry from which the package was fetched.

`v10.6.0`

Compare Source

Minor Changes

pnpm-workspace.yaml can now hold all the settings that .npmrc accepts. The settings should use camelCase #9211.

pnpm-workspace.yaml example:
```
verifyDepsBeforeRun: install
optimisticRepeatInstall: true
publicHoistPattern:
  - "*types*"
  - "!@&#8203;types/react"
```
Projects using a file: dependency on a local tarball file (i.e. .tgz, .tar.gz, .tar) will see a performance improvement during installation. Previously, using a file: dependency on a tarball caused the lockfile resolution step to always run. The lockfile will now be considered up-to-date if the tarball is unchanged.

Patch Changes

pnpm self-update should not leave a directory with a broken pnpm installation if the installation fails.
fast-glob replace with tinyglobby to reduce the size of the pnpm CLI dependencies #9169.
pnpm deploy should not remove fields from the deployed package's package.json file #9215.
pnpm self-update should not read the pnpm settings from the package.json file in the current working directory.
Fix pnpm deploy creating a package.json without the imports and license field #9193.
pnpm update -i should list only packages that have newer versions #9206.
Fix a bug causing entries in the catalogs section of the pnpm-lock.yaml file to be removed when dedupe-peer-dependents=false on a filtered install. #9112

`v10.5.2`

Compare Source

Patch Changes

The pnpm config set command should change the global .npmrc file by default.
This was a regression introduced by #9151 and shipped in pnpm v10.5.0.

`v10.5.1`

Compare Source

Patch Changes

Throw an error message if a pnpm-workspaces.yaml or pnpm-workspaces.yml file is found instead of a pnpm-workspace.yaml #9170.
Fix the update of pnpm-workspace.yaml by the pnpm approve-builds command #9168.
Normalize generated link paths in package.json #9163
Specifying overrides in pnpm-workspace.yaml should work.
pnpm dlx should ignore settings from the package.json file in the current working directory #9178.

`v10.5.0`

Compare Source

Minor Changes

Allow to set the "pnpm" settings from package.json via the pnpm-workspace.yaml file #9121.
Added support for automatically syncing files of injected workspace packages after pnpm run #9081. Use the sync-injected-deps-after-scripts setting to specify which scripts build the workspace package. This tells pnpm when syncing is needed. The setting should be defined in a .npmrc file at the root of the workspace. Example:
```
sync-injected-deps-after-scripts[]=compile
```
The packages field in pnpm-workspace.yaml became optional.

Patch Changes

pnpm link with no parameters should work as if --global is specified #9151.
Allow scope registry CLI option without --config. prefix such as --@scope:registry=https://scope.example.com/npm #9089.
pnpm link <path> should calculate relative path from the root of the workspace directory #9132.
Fix a bug causing catalog snapshots to be removed from the pnpm-lock.yaml file when using --fix-lockfile and --filter. #8639
Fix a bug causing catalog protocol dependencies to not re-resolve on a filtered install #8638.

`v10.4.1`

Compare Source

Patch Changes

Throws an error when the value provided by the --allow-build option overlaps with the pnpm.ignoredBuildDependencies list #9105.
Print pnpm's version after the execution time at the end of the console output.
Print warning about ignored builds of dependencies on repeat install #9106.
Setting init-package-manager should work.

`v10.4.0`

Compare Source

Minor Changes

pnpm approve-builds --global works now for allowing dependencies of globally installed packages to run postinstall scripts.
The pnpm add command now supports a new flag, --allow-build, which allows building the specified dependencies. For instance, if you want to install a package called bundle that has esbuild as a dependency and want to allow esbuild to run postinstall scripts, you can run:
```
pnpm --allow-build=esbuild add bundle
```
This will run esbuild's postinstall script and also add it to the pnpm.onlyBuiltDependencies field of package.json. So, esbuild will always be allowed to run its scripts in the future.

Related PR: #9086.
The pnpm init command adds a packageManager field with the current version of pnpm CLI #9069. To disable this behaviour, set the init-package-manager setting to false.

Patch Changes

pnpm approve-builds should work after two consecutive pnpm install runs #9083.
Fix instruction for updating pnpm with corepack #9101.
The pnpm version specified by packageManager cannot start with v.

`v10.3.0`

Compare Source

Minor Changes

Added a new setting called strict-dep-builds. When enabled, the installation will exit with a non-zero exit code if any dependencies have unreviewed build scripts (aka postinstall scripts) #9071.

Patch Changes

Fix a false negative of verify-deps-before-run after pnpm install --production|--no-optional #9019.
Print the warning about blocked installation scripts at the end of the installation output and make it more prominent.

`v10.2.1`

Compare Source

Patch Changes

Don't read a package from side-effects cache if it isn't allowed to be built #9042.
pnpm approve-builds should work, when executed from a subdirectory of a workspace #9042.
pnpm deploy --legacy should work without injected dependencies.
Add information about how to deploy without "injected dependencies" to the "pnpm deploy" error message.

`v10.2.0`

Compare Source

Minor Changes

Packages executed via pnpm dlx and pnpm create are allowed to be built (run postinstall scripts) by default.

If the packages executed by dlx or create have dependencies that have to be built, they should be listed via the --allow-build flag. For instance, if you want to run a package called bundle that has esbuild in dependencies and want to allow esbuild to run postinstall scripts, run:
```
pnpm --allow-build=esbuild dlx bundle
```
Related PR: #9026.

Patch Changes

Quote args for scripts with shell-quote to support new lines (on POSIX only) #8980.
Fix a bug in which pnpm deploy fails to read the correct projectId when the deploy source is the same as the workspace directory #9001.
Proxy settings should be respected, when resolving Git-hosted dependencies #6530.
Prevent overrides from adding invalid version ranges to peerDependencies by keeping the peerDependencies and overriding them with prod dependencies #8978.
Sort the package names in the "pnpm.onlyBuiltDependencies" list saved by pnpm approve-builds.

`v10.1.0`

Compare Source

Minor Changes

Added a new command for printing the list of dependencies with ignored build scripts: pnpm ignored-builds #8963.
Added a new command for approving dependencies for running scripts during installation: pnpm approve-builds #8963.
Added a new setting called optimistic-repeat-install. When enabled, a fast check will be performed before proceeding to installation. This way a repeat install or an install on a project with everything up-to-date becomes a lot faster. But some edge cases might arise, so we keep it disabled by default for now #8977.
Added a new field "pnpm.ignoredBuiltDependencies" for explicitly listing packages that should not be built. When a package is in the list, pnpm will not print an info message about that package not being built #8935.

Patch Changes

Verify that the package name is valid when executing the publish command.
When running pnpm install, the preprepare and postprepare scripts of the project should be executed #8989.
Allow workspace: and catalog: to be part of wider version range in peerDependencies.
pnpm deploy should inherit the pnpm object from the root package.json #8991.
Make sure that the deletion of a node_modules in a sub-project of a monorepo is detected as out-of-date #8959.
Fix infinite loop caused by lifecycle scripts using pnpm to execute other scripts during pnpm install with verify-deps-before-run=install #8954.
Replace strip-ansi with the built-in util.stripVTControlCharacters #9009.
Do not print patched dependencies as ignored dependencies that require a build #8952.

`v10.0.0`

Compare Source

Major Changes

Lifecycle scripts of dependencies are not executed during installation by default! This is a breaking change aimed at increasing security. In order to allow lifecycle scripts of specific dependencies, they should be listed in the pnpm.onlyBuiltDependencies field of package.json #8897. For example:
```
{
  "pnpm": {
    "onlyBuiltDependencies": ["fsevents"]
  }
}
```
pnpm link behavior updated:

The pnpm link command now adds overrides to the root package.json.
- In a workspace: The override is added to the root of the workspace, linking the dependency to all projects in the workspace.
- Global linking: To link a package globally, run pnpm link from the package’s directory. Previously, you needed to use pnpm link -g.
  Related PR: #8653
Secure hashing with SHA256:

Various hashing algorithms have been updated to SHA256 for enhanced security and consistency:
- Long paths inside node_modules/.pnpm are now hashed with SHA256.
- Long peer dependency hashes in the lockfile now use SHA256 instead of MD5. (This affects very few users since these are only used for long keys.)
- The hash stored in the packageExtensionsChecksum field of pnpm-lock.yaml is now SHA256.
- The side effects cache keys now use SHA256.
- The pnpmfile checksum in the lockfile now uses SHA256 (#8530).
Configuration updates:
- manage-package-manager-versions: enabled by default. pnpm now manages its own version based on the packageManager field in package.json by default.
- public-hoist-pattern: nothing is hoisted by default. Packages containing eslint or prettier in their name are no longer hoisted to the root of node_modules. Related Issue: #8378
- Upgraded @yarnpkg/extensions to v2.0.3. This may alter your lockfile.
- virtual-store-dir-max-length: the default value on Windows has been reduced to 60 characters.
- Reduced environment variables for scripts:
  During script execution, fewer npm_package_* environment variables are set. Only name, version, bin, engines, and config remain.
  Related Issue: #8552
- All dependencies are now installed even if NODE_ENV=production. Related Issue: #8827
Changes to the global store:
- Store version bumped to v10.
- Some registries allow identical content to be published under different

Configuration

📅 Schedule: Branch creation - Between 12:00 AM and 03:59 AM, only on Monday ( * 0-3 * * 1 ) (UTC), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

renovate · 2025-03-24T02:33:26Z

⚠️ Artifact update problem

Renovate failed to update an artifact related to this branch. You probably do not want to merge this PR as-is.

♻ Renovate will retry this branch, including artifacts, only when one of the following happens:

any of the package files in this branch needs updating, or
the branch becomes conflicted, or
you click the rebase/retry checkbox if found above, or
you rename this PR's title to start with "rebase!" to trigger it manually

The artifact failure details are included below:

File name: packages/nutui-auto-import/pnpm-lock.yaml

Scope: all 5 workspace projects
../..                                    | Progress: resolved 1, reused 0, downloaded 0, added 0
../..                                    |  WARN  deprecated @babel/[email protected]
../..                                    |  WARN  deprecated @types/[email protected]
../..                                    |  WARN  deprecated [email protected]
../..                                    | Progress: resolved 58, reused 0, downloaded 0, added 0
../..                                    |  WARN  deprecated [email protected]
../..                                    | Progress: resolved 106, reused 0, downloaded 0, added 0
../nutui-replace-icons                   |  WARN  deprecated [email protected]
../..                                    | Progress: resolved 154, reused 0, downloaded 0, added 0
/tmp/renovate/repos/github/jdf2e/nutui-react/packages/nutui-taro-demo:
 ERR_PNPM_FETCH_404  GET https://registry.npmjs.org/@dongdesign%2Finject-jd-platform-styles: Not Found - 404

This error happened while installing a direct dependency of /tmp/renovate/repos/github/jdf2e/nutui-react/packages/nutui-taro-demo

@dongdesign/inject-jd-platform-styles is not in the npm registry, or you have no permission to fetch it.

No authorization header was set for the request.

coderabbitai · 2025-03-24T02:33:30Z

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

_{Comment @coderabbitai help to get the list of available commands and usage tips.}

codecov · 2025-03-24T02:35:19Z

Codecov Report

✅ All modified and coverable lines are covered by tests.
✅ Project coverage is 88.15%. Comparing base (e9a80b8) to head (752c729).

Additional details and impacted files

@@            Coverage Diff             @@
##           feat_v3.x    #3116   +/-   ##
==========================================
  Coverage      88.15%   88.15%           
==========================================
  Files            291      291           
  Lines          19212    19212           
  Branches        2988     2988           
==========================================
  Hits           16937    16937           
  Misses          2269     2269           
  Partials           6        6

☔ View full report in Codecov by Sentry.
📢 Have feedback on the report? Share it here.

🚀 New features to boost your workflow:

❄️ Test Analytics: Detect flaky tests, report on failures, and find test suite problems.
📦 JS Bundle Analysis: Save yourself from yourself by tracking and limiting bundle sizes in JS merges.

renovate bot added the dependencies label Mar 24, 2025

pull-request-size bot added the size/XS label Mar 24, 2025

github-actions bot added action:review This PR needs more reviews (less than 2 approvals) 3.x Target branch 3.x labels Mar 24, 2025

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from d55cc3e to 841ee43 Compare April 1, 2025 13:49

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from db655ee to ffa1c4e Compare April 14, 2025 17:05

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 98f1e80 to 60f5d95 Compare April 28, 2025 03:08

renovate bot force-pushed the renovate/pnpm-10.x branch from 60f5d95 to b337a8f Compare May 13, 2025 17:16

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 920f592 to cb5229a Compare June 8, 2025 18:15

renovate bot force-pushed the renovate/pnpm-10.x branch 3 times, most recently from 7a3ac2a to 42d9156 Compare June 26, 2025 20:25

renovate bot force-pushed the renovate/pnpm-10.x branch from 42d9156 to 48d4def Compare July 9, 2025 11:48

renovate bot force-pushed the renovate/pnpm-10.x branch from 48d4def to adb5f63 Compare July 31, 2025 19:39

renovate bot force-pushed the renovate/pnpm-10.x branch from adb5f63 to ee9e8ea Compare August 10, 2025 13:28

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from ea452d9 to 9201891 Compare August 19, 2025 21:58

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 8a9c072 to 43a11b3 Compare September 3, 2025 04:08

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 0d94110 to 10f0321 Compare September 17, 2025 15:37

renovate bot force-pushed the renovate/pnpm-10.x branch from 10f0321 to 8bf9766 Compare September 22, 2025 16:30

renovate bot force-pushed the renovate/pnpm-10.x branch from 8bf9766 to 55f9514 Compare October 2, 2025 16:39

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 0ca8356 to 7db4d63 Compare October 10, 2025 02:14

renovate bot force-pushed the renovate/pnpm-10.x branch 2 times, most recently from 286dc0f to 70a9bb9 Compare October 21, 2025 10:13

chore(deps): update pnpm to v10

752c729

renovate bot force-pushed the renovate/pnpm-10.x branch from 70a9bb9 to 752c729 Compare October 21, 2025 23:44

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

chore(deps): update pnpm to v10 #3116

chore(deps): update pnpm to v10 #3116

Uh oh!

renovate bot commented Mar 24, 2025 •

edited

Loading

Uh oh!

renovate bot commented Mar 24, 2025 •

edited

Loading

Uh oh!

coderabbitai bot commented Mar 24, 2025 •

edited

Loading

Review skipped

Uh oh!

codecov bot commented Mar 24, 2025 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

0 participants

chore(deps): update pnpm to v10 #3116

Are you sure you want to change the base?

chore(deps): update pnpm to v10 #3116

Uh oh!

Conversation

renovate bot commented Mar 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Release Notes

Minor Changes

Patch Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Minor Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Patch Changes

Patch Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Minor Changes

Patch Changes

Patch Changes

Minor Changes

Patch Changes

Minor Changes

Patch Changes

Major Changes

Configuration

Uh oh!

renovate bot commented Mar 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

⚠️ Artifact update problem

File name: packages/nutui-auto-import/pnpm-lock.yaml

Uh oh!

coderabbitai bot commented Mar 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Review skipped

Uh oh!

codecov bot commented Mar 24, 2025 • edited Loading Uh oh! There was an error while loading. Please reload this page.

renovate bot commented Mar 24, 2025 •

edited

Loading

renovate bot commented Mar 24, 2025 •

edited

Loading

coderabbitai bot commented Mar 24, 2025 •

edited

Loading

codecov bot commented Mar 24, 2025 •

edited

Loading