Add gpad, a small 4 key macropad #560
Conversation
|
The latest updates on your projects. Learn more about Vercel for Git ↗︎
|
danieliscrazy
left a comment
danieliscrazy
left a comment
There was a problem hiding this comment.
Hey there! It appears your PCB and your case are missing branding. All parts of your case must be branded. Once you've fixed this, I'll give you my approval!
|
I the branding on PCBs aren't required, since everyone is ordering it themselfs. Plus the ones on the case isn't required too if you are printing it yourself |
|
@cheyao Double checked the guide, you are correct on the PCB part, however as they've put the case on their BOM, they likely want it to be printed for them. |
add text branding on bottom of both cases
|
@danieliscrazy There should be branding on both parts of the case. There is a small "gpad" indent on the bottom of both parts of the case. |
Overlord-Runt
left a comment
Overlord-Runt
left a comment
There was a problem hiding this comment.
hihi, can you follow the repo structure here
4 participants
Ready to submit your project? Nice job! Hopefully you've read the submission guidelines. If not, make sure to read them first.
Check off the following to let the reviewers know you've done everything:
[x] I HAVE RAN DRC ON MY DESIGN WITH ZERO ERRORS (Silkscreen errors are okay)
[x] I HAVE BRANDED ALL MY PARTS (PCB, CASE) WITH MY HACKPAD'S NAME
[x] I HAVE MADE SURE MY 3D PRINTED PARTS DO NOT REQUIRE SUPPORTS (Text branding overhang is okay)
[x] I HAVE MADE SURE TO INCLUDE TOLERANCES (0.25mm)
[x] MY HACKPAD'S PCB IS UNDER 100mm x 100mm, I DO NOT HAVE MORE THAN 16X SWITCHES, 2X ROTARY ENCODERS, 1X OLED, 16X LEDS.
[x] IN MY FOLDER, THERE IS A README.MD FILE THAT CONTAINS THE FOLLOWING INFORMATION:
If you're unsure about the format, make sure to check out this example and follow the format there.
If this PR isn't a submission, that's okay too! Please remove the above boxes and explain what the pull request is for! If there's anything about this PR template that seems confusing, send a message in #hackpad in slack!