add senseBox-eye with ESP32S3

ports/espressif/README.rst

@@ -222,4 +222,3 @@ And follow the Espressif GDB tutorial `instructions for connecting <https://docs
     mon reset halt
     flushregs
     thb app_main
-    c

ports/espressif/boards/sensebox_eye_esp32s3/board.c

@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "mpconfigboard.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.

ports/espressif/boards/sensebox_eye_esp32s3/mpconfigboard.h

@@ -0,0 +1,18 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "senseBox-eye ESP32S3"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO45)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO1)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO2)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO44)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO43)

ports/espressif/boards/sensebox_eye_esp32s3/mpconfigboard.mk

@@ -0,0 +1,21 @@
+USB_VID = 0x303A
+USB_PID = 0x82D2
+
+USB_PRODUCT = "senseBox-eye ESP32S3"
+USB_MANUFACTURER = "senseBox"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+
+CIRCUITPY_ESP_PSRAM_MODE = opi
+CIRCUITPY_ESP_PSRAM_SIZE = 8MB
+CIRCUITPY_ESP_PSRAM_FREQ = 80m
+
+CIRCUITPY_ESPCAMERA = 1
+CIRCUITPY_AUDIOBUSIO = 1
+
+# Include these Python libraries in firmware.
+FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel

ports/espressif/boards/sensebox_eye_esp32s3/pins.c

@@ -0,0 +1,82 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "py/objtuple.h"
+#include "shared-bindings/board/__init__.h"
+#include "shared-module/displayio/__init__.h"
+
+CIRCUITPY_BOARD_BUS_SINGLETON(sscb_i2c, i2c, 2)
+
+static const mp_rom_obj_tuple_t camera_data_tuple = {
+    // The order matters.
+    // They must be ordered from low to high (CAM_D0, CAM_D1...CAM_D7).
+
+    // Do not include any of the control pins in here.
+    {&mp_type_tuple},
+    8,
+    {
+        MP_ROM_PTR(&pin_GPIO11),
+        MP_ROM_PTR(&pin_GPIO9),
+        MP_ROM_PTR(&pin_GPIO8),
+        MP_ROM_PTR(&pin_GPIO10),
+        MP_ROM_PTR(&pin_GPIO12),
+        MP_ROM_PTR(&pin_GPIO18),
+        MP_ROM_PTR(&pin_GPIO17),
+        MP_ROM_PTR(&pin_GPIO16),
+    }
+};
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+    { MP_ROM_QSTR(MP_QSTR_BUTTON), MP_ROM_PTR(&pin_GPIO0) },
+    { MP_ROM_QSTR(MP_QSTR_BOOT0), MP_ROM_PTR(&pin_GPIO0) },
+    {MP_ROM_QSTR(MP_QSTR_BUTTON_SW), MP_ROM_PTR(&pin_GPIO47) },
+
+    { MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO2) },
+    { MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D1), MP_ROM_PTR(&pin_GPIO1) },
+    { MP_ROM_QSTR(MP_QSTR_D2), MP_ROM_PTR(&pin_GPIO2) },
+
+    { MP_ROM_QSTR(MP_QSTR_A14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_D14), MP_ROM_PTR(&pin_GPIO14) },
+    { MP_ROM_QSTR(MP_QSTR_A48), MP_ROM_PTR(&pin_GPIO48) },
+    { MP_ROM_QSTR(MP_QSTR_D48), MP_ROM_PTR(&pin_GPIO48) },
+
+    { MP_ROM_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO45) },
+    { MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO45) },
+
+    { MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_GPIO43) },
+    { MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_GPIO44) },
+    { MP_ROM_QSTR(MP_QSTR_UART_ENABLE), MP_ROM_PTR(&pin_GPIO26) },
+
+    { MP_ROM_QSTR(MP_QSTR_CAM_DATA), MP_ROM_PTR(&camera_data_tuple) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D0), MP_ROM_PTR(&pin_GPIO11) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D1), MP_ROM_PTR(&pin_GPIO9) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D2), MP_ROM_PTR(&pin_GPIO8) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D3), MP_ROM_PTR(&pin_GPIO10) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D4), MP_ROM_PTR(&pin_GPIO12) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D5), MP_ROM_PTR(&pin_GPIO18) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D6), MP_ROM_PTR(&pin_GPIO17) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_D7), MP_ROM_PTR(&pin_GPIO16) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_XCLK), MP_ROM_PTR(&pin_GPIO15) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_HREF), MP_ROM_PTR(&pin_GPIO7) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_PCLK), MP_ROM_PTR(&pin_GPIO13) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_VSYNC), MP_ROM_PTR(&pin_GPIO6) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_SCL), MP_ROM_PTR(&pin_GPIO5) },
+    { MP_ROM_QSTR(MP_QSTR_CAM_SDA), MP_ROM_PTR(&pin_GPIO4) },
+    { MP_ROM_QSTR(MP_QSTR_PWDN),   MP_ROM_PTR(&pin_GPIO46) },
+
+    { MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_GPIO41) },
+    { MP_ROM_QSTR(MP_QSTR_SD_MOSI), MP_ROM_PTR(&pin_GPIO38) },
+    { MP_ROM_QSTR(MP_QSTR_SD_SCLK), MP_ROM_PTR(&pin_GPIO39) },
+    { MP_ROM_QSTR(MP_QSTR_SD_MISO), MP_ROM_PTR(&pin_GPIO40) },
+    { MP_ROM_QSTR(MP_QSTR_SD_ENABLE), MP_ROM_PTR(&pin_GPIO3) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
+    { MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

ports/espressif/boards/sensebox_eye_esp32s3/sdkconfig

@@ -0,0 +1,19 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+# end of LWIP
+# Camera configuration
+#
+CONFIG_OV2640_SUPPORT=y
+# CONFIG_OV7725_SUPPORT is not set
+# CONFIG_OV3660_SUPPORT is not set
+# end of Camera configuration
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration

ports/espressif/boards/sensebox_mcu_esp32s2/mpconfigboard.mk

@@ -1,7 +1,7 @@
 USB_VID = 0x303A
 USB_PID = 0x81B9
 USB_PRODUCT = "senseBox MCU-S2 ESP32S2"
-USB_MANUFACTURER = "Espressif"
+USB_MANUFACTURER = "senseBox"
 
 IDF_TARGET = esp32s2