Skip to content

Conversation

TravisEz13
Copy link
Member

@TravisEz13 TravisEz13 commented Feb 22, 2023

PR Summary

  • Always regenerate the files wxs fragment
    • Add our own JSON BOM and verify that
      • The goal would be for this BOM to change less often and have more information about our files.

PR Context

We no long have using msp in scope

PR Checklist

@ghost ghost added the Waiting on Author The PR was reviewed and requires changes or comments from the author before being accept label Feb 27, 2023
@ghost ghost removed the Waiting on Author The PR was reviewed and requires changes or comments from the author before being accept label Feb 27, 2023
@TravisEz13 TravisEz13 force-pushed the remove-wix-files-creation branch from 9fe7c74 to 97333dd Compare March 1, 2023 19:19
@daxian-dbw daxian-dbw assigned TravisEz13 and unassigned daxian-dbw Mar 7, 2023
@TravisEz13 TravisEz13 added the CL-BuildPackaging Indicates that a PR should be marked as a build or packaging change in the Change Log label Mar 8, 2023
@TravisEz13 TravisEz13 enabled auto-merge (squash) March 8, 2023 21:57
@TravisEz13 TravisEz13 merged commit db9257c into PowerShell:master Mar 8, 2023
@pull-request-quantifier-deprecated

This PR has 2740 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!


Quantification details

Label      : Extra Large
Size       : +2491 -249
Percentile : 100%

Total files changed: 6

Change summary by file extension:
.gitignore : +2 -0
.wxs : +0 -21
.json : +2308 -0
.psd1 : +1 -1
.psm1 : +180 -227

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

  • Fast and predictable releases to production:
    • Optimal size changes are more likely to be reviewed faster with fewer
      iterations.
    • Similarity in low PR complexity drives similar review times.
  • Review quality is likely higher as complexity is lower:
    • Bugs are more likely to be detected.
    • Code inconsistencies are more likely to be detected.
  • Knowledge sharing is improved within the participants:
    • Small portions can be assimilated better.
  • Better engineering practices are exercised:
    • Solving big problems by dividing them in well contained, smaller problems.
    • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

  • Use the PullRequestQuantifier to quantify your PR accurately
    • Create a context profile for your repo using the context generator
    • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
    • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
    • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
  • Change your engineering behaviors
    • For PRs that fall outside of the desired spectrum, review the details and check if:
      • Your PR could be split in smaller, self-contained PRs instead
      • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

  • One line was added: +1 -0
  • One line was deleted: +0 -1
  • One line was modified: +1 -1 (git diff doesn't know about modified, it will
    interpret that line like one addition plus one deletion)
  • Change percentiles: Change characteristics (addition, deletion, modification)
    of this PR in relation to all other PRs within the repository.


Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

1 similar comment
@pull-request-quantifier-deprecated

This PR has 2740 quantified lines of changes. In general, a change size of upto 200 lines is ideal for the best PR experience!


Quantification details

Label      : Extra Large
Size       : +2491 -249
Percentile : 100%

Total files changed: 6

Change summary by file extension:
.gitignore : +2 -0
.wxs : +0 -21
.json : +2308 -0
.psd1 : +1 -1
.psm1 : +180 -227

Change counts above are quantified counts, based on the PullRequestQuantifier customizations.

Why proper sizing of changes matters

Optimal pull request sizes drive a better predictable PR flow as they strike a
balance between between PR complexity and PR review overhead. PRs within the
optimal size (typical small, or medium sized PRs) mean:

  • Fast and predictable releases to production:
    • Optimal size changes are more likely to be reviewed faster with fewer
      iterations.
    • Similarity in low PR complexity drives similar review times.
  • Review quality is likely higher as complexity is lower:
    • Bugs are more likely to be detected.
    • Code inconsistencies are more likely to be detected.
  • Knowledge sharing is improved within the participants:
    • Small portions can be assimilated better.
  • Better engineering practices are exercised:
    • Solving big problems by dividing them in well contained, smaller problems.
    • Exercising separation of concerns within the code changes.

What can I do to optimize my changes

  • Use the PullRequestQuantifier to quantify your PR accurately
    • Create a context profile for your repo using the context generator
    • Exclude files that are not necessary to be reviewed or do not increase the review complexity. Example: Autogenerated code, docs, project IDE setting files, binaries, etc. Check out the Excluded section from your prquantifier.yaml context profile.
    • Understand your typical change complexity, drive towards the desired complexity by adjusting the label mapping in your prquantifier.yaml context profile.
    • Only use the labels that matter to you, see context specification to customize your prquantifier.yaml context profile.
  • Change your engineering behaviors
    • For PRs that fall outside of the desired spectrum, review the details and check if:
      • Your PR could be split in smaller, self-contained PRs instead
      • Your PR only solves one particular issue. (For example, don't refactor and code new features in the same PR).

How to interpret the change counts in git diff output

  • One line was added: +1 -0
  • One line was deleted: +0 -1
  • One line was modified: +1 -1 (git diff doesn't know about modified, it will
    interpret that line like one addition plus one deletion)
  • Change percentiles: Change characteristics (addition, deletion, modification)
    of this PR in relation to all other PRs within the repository.


Was this comment helpful? 👍  :ok_hand:  :thumbsdown: (Email)
Customize PullRequestQuantifier for this repository.

@TravisEz13 TravisEz13 deleted the remove-wix-files-creation branch March 8, 2023 22:38
@ghost
Copy link

ghost commented Mar 14, 2023

🎉v7.4.0-preview.2 has been released which incorporates this pull request.:tada:

Handy links:

@ghost
Copy link

ghost commented Jun 27, 2023

🎉v7.3.5 has been released which incorporates this pull request.:tada:

Handy links:

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
Backport-7.2.x-Done Backport-7.3.x-Done CL-BuildPackaging Indicates that a PR should be marked as a build or packaging change in the Change Log Extra Large
Projects
None yet
Development

Successfully merging this pull request may close these issues.

3 participants