mips: dts: cameo-rtl9302c: Add switch block

Add the switch port and phys to the cameo-rtl9302c-2x-rtl8224-2xge
board.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: NipaLocal <nipa@local>

Author: cpackham-atlnz

arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts

@@ -71,3 +71,51 @@
 		};
 	};
 };
+
+&switch0 {
+	ethernet-ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			phy-mode = "usxgmii";
+		};
+		port@1 {
+			reg = <1>;
+			phy-mode = "usxgmii";
+		};
+		port@2 {
+			reg = <2>;
+			phy-mode = "usxgmii";
+		};
+		port@3 {
+			reg = <3>;
+			phy-mode = "usxgmii";
+		};
+		port@16 {
+			reg = <16>;
+			phy-mode = "usxgmii";
+		};
+		port@17 {
+			reg = <17>;
+			phy-mode = "usxgmii";
+		};
+		port@18 {
+			reg = <18>;
+			phy-mode = "usxgmii";
+		};
+		port@19 {
+			reg = <19>;
+			phy-mode = "usxgmii";
+		};
+		port@24{
+			reg = <24>;
+			phy-mode = "10gbase-r";
+		};
+		port@25{
+			reg = <25>;
+			phy-mode = "10gbase-r";
+		};
+	};
+};