ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.

Signed-off-by: Romain Degez <[email protected]>
Tested-by: Romain Degez <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Cc: [email protected]

Author: rdegez

drivers/ata/ahci.c

@@ -456,6 +456,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* Promise */
 	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
+	{ PCI_VDEVICE(PROMISE, 0x3781), board_ahci },   /* FastTrak TX8660 ahci-mode */
 
 	/* Asmedia */
 	{ PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci },	/* ASM1060 */