From c03bf1bfd3a5448a4474f02b839f2195e3719cd9 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 18 Feb 2015 10:34:08 +0100 Subject: [PATCH 01/79] drm/tegra: hdmi: Explicitly set clock rate Recent changes in the clock framework have caused a behavioural change in that clocks that have not had their rate set explicitly will now be reset to their initial rate (or 0) when the clock is released. This is triggered in the deferred probing path, resulting in the clock running at a wrong frequency after the successful probe. This can be easily fixed by setting the rate explicitly rather than by relying on the implicit rate inherited by the parent. Tested-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/hdmi.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/tegra/hdmi.c b/drivers/gpu/drm/tegra/hdmi.c index 7e06657ae58bc1..7eaaee74a039f3 100644 --- a/drivers/gpu/drm/tegra/hdmi.c +++ b/drivers/gpu/drm/tegra/hdmi.c @@ -851,6 +851,14 @@ static void tegra_hdmi_encoder_mode_set(struct drm_encoder *encoder, h_back_porch = mode->htotal - mode->hsync_end; h_front_porch = mode->hsync_start - mode->hdisplay; + err = clk_set_rate(hdmi->clk, pclk); + if (err < 0) { + dev_err(hdmi->dev, "failed to set HDMI clock frequency: %d\n", + err); + } + + DRM_DEBUG_KMS("HDMI clock rate: %lu Hz\n", clk_get_rate(hdmi->clk)); + /* power up sequence */ value = tegra_hdmi_readl(hdmi, HDMI_NV_PDISP_SOR_PLL0); value &= ~SOR_PLL_PDBG; From 567a3cd1d75e3f282759af3bd05a7369daef2b2a Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 19 Feb 2015 12:35:56 +0100 Subject: [PATCH 02/79] drm/tegra: dc: Reset state's active_changed field Commit eab3bbeffd15 ("drm/atomic: Add drm_crtc_state->active") added the field to track the DPMS state. However, the Tegra driver was in modified in parallel and subclasses the CRTC atomic state, so needed to duplicate the code in the atomic helpers. After the addition of the active_changed field it became out of sync and doesn't reset it when duplicating state. This causes a full modeset on things like page-flips, which will in turn cause warnings due to the VBLANK machinery being disabled when it really should remain on. Tested-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 3aaa84ae26811f..ec84bd48656135 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -1012,6 +1012,7 @@ tegra_crtc_atomic_duplicate_state(struct drm_crtc *crtc) return NULL; copy->base.mode_changed = false; + copy->base.active_changed = false; copy->base.planes_changed = false; copy->base.event = NULL; From 332bbe7003badae01fed55b11820fcd467b3bbf4 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 28 Jan 2015 15:03:31 +0100 Subject: [PATCH 03/79] drm/tegra: dc: Wire up CRTC parent of atomic state Store a pointer to the CRTC in its atomic state to make it easy for state handling code to get at the CRTC. Tested-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index ec84bd48656135..2fd229366bb2a7 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -997,8 +997,10 @@ static void tegra_crtc_reset(struct drm_crtc *crtc) crtc->state = NULL; state = kzalloc(sizeof(*state), GFP_KERNEL); - if (state) + if (state) { crtc->state = &state->base; + crtc->state->crtc = crtc; + } } static struct drm_crtc_state * From 07d05cbf60ed8f06c61484d3d85c06c1aa7edf38 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Wed, 28 Jan 2015 15:17:44 +0100 Subject: [PATCH 04/79] drm/tegra: dc: Move more code into ->init() The code in tegra_crtc_prepare() really belongs in tegra_dc_init(), or at least most of it. This fixes an issue with VBLANK handling because tegra_crtc_prepare() would overwrite the interrupt mask register that tegra_crtc_enable_vblank() had written to to enable VBLANK interrupts. Tested-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/dc.c | 74 +++++++++++++++++++------------------- 1 file changed, 36 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c index 2fd229366bb2a7..1a52522f5da767 100644 --- a/drivers/gpu/drm/tegra/dc.c +++ b/drivers/gpu/drm/tegra/dc.c @@ -1230,9 +1230,6 @@ static void tegra_crtc_mode_set_nofb(struct drm_crtc *crtc) /* program display mode */ tegra_dc_set_timings(dc, mode); - if (dc->soc->supports_border_color) - tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR); - /* interlacing isn't supported yet, so disable it */ if (dc->soc->supports_interlacing) { value = tegra_dc_readl(dc, DC_DISP_INTERLACE_CONTROL); @@ -1255,42 +1252,7 @@ static void tegra_crtc_mode_set_nofb(struct drm_crtc *crtc) static void tegra_crtc_prepare(struct drm_crtc *crtc) { - struct tegra_dc *dc = to_tegra_dc(crtc); - unsigned int syncpt; - unsigned long value; - drm_crtc_vblank_off(crtc); - - if (dc->pipe) - syncpt = SYNCPT_VBLANK1; - else - syncpt = SYNCPT_VBLANK0; - - /* initialize display controller */ - tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL); - tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_TYPE); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | - WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY); - - /* initialize timer */ - value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) | - WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20); - tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY); - - value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) | - WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1); - tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER); - - value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE); - - value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; - tegra_dc_writel(dc, value, DC_CMD_INT_MASK); } static void tegra_crtc_commit(struct drm_crtc *crtc) @@ -1667,6 +1629,8 @@ static int tegra_dc_init(struct host1x_client *client) struct tegra_drm *tegra = drm->dev_private; struct drm_plane *primary = NULL; struct drm_plane *cursor = NULL; + unsigned int syncpt; + u32 value; int err; if (tegra->domain) { @@ -1733,6 +1697,40 @@ static int tegra_dc_init(struct host1x_client *client) goto cleanup; } + /* initialize display controller */ + if (dc->pipe) + syncpt = SYNCPT_VBLANK1; + else + syncpt = SYNCPT_VBLANK0; + + tegra_dc_writel(dc, 0x00000100, DC_CMD_GENERAL_INCR_SYNCPT_CNTRL); + tegra_dc_writel(dc, 0x100 | syncpt, DC_CMD_CONT_SYNCPT_VSYNC); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | WIN_A_OF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_TYPE); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT | + WIN_A_OF_INT | WIN_B_OF_INT | WIN_C_OF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_POLARITY); + + /* initialize timer */ + value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(0x20) | + WINDOW_B_THRESHOLD(0x20) | WINDOW_C_THRESHOLD(0x20); + tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY); + + value = CURSOR_THRESHOLD(0) | WINDOW_A_THRESHOLD(1) | + WINDOW_B_THRESHOLD(1) | WINDOW_C_THRESHOLD(1); + tegra_dc_writel(dc, value, DC_DISP_DISP_MEM_HIGH_PRIORITY_TIMER); + + value = VBLANK_INT | WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_ENABLE); + + value = WIN_A_UF_INT | WIN_B_UF_INT | WIN_C_UF_INT; + tegra_dc_writel(dc, value, DC_CMD_INT_MASK); + + if (dc->soc->supports_border_color) + tegra_dc_writel(dc, 0, DC_DISP_BORDER_COLOR); + return 0; cleanup: From 1365aa6266fad0669487240af3f098593796172c Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 17 Feb 2015 11:58:27 +0200 Subject: [PATCH 05/79] drm/amdkfd: Initialize only amdkfd's assigned pipelines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a bug in the initialization of the pipelines. The init_pipelines() function was called with a constant value of 0 in the first_pipe argument. This is an error because amdkfd doesn't handle pipe 0. The correct way is to pass the value that get_first_pipe() returns as the argument for first_pipe. This bug appeared in 3.19 (first version with amdkfd) and it causes around 15% drop in CPU performance of Kaveri (A10-7850). v2: Don't set get_first_pipe() as inline because it calls BUG_ON() Signed-off-by: Oded Gabbay Cc: stable@vger.kernel.org Tested-by: Michel Dänzer --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 4 ++-- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 1 + drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index b3589d0e39b9c2..1b58f331afee2c 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -62,9 +62,9 @@ enum KFD_MQD_TYPE get_mqd_type_from_queue_type(enum kfd_queue_type type) return KFD_MQD_TYPE_CP; } -static inline unsigned int get_first_pipe(struct device_queue_manager *dqm) +unsigned int get_first_pipe(struct device_queue_manager *dqm) { - BUG_ON(!dqm); + BUG_ON(!dqm || !dqm->dev); return dqm->dev->shared_resources.first_compute_pipe; } diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index d64f86cda34f5a..386bd7df7c3010 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -163,6 +163,7 @@ void program_sh_mem_settings(struct device_queue_manager *dqm, struct qcm_process_device *qpd); int init_pipelines(struct device_queue_manager *dqm, unsigned int pipes_num, unsigned int first_pipe); +unsigned int get_first_pipe(struct device_queue_manager *dqm); extern inline unsigned int get_sh_mem_bases_32(struct kfd_process_device *pdd) { diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c index 6b072466e2a6f6..5469efe0523e8d 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager_cik.c @@ -131,5 +131,5 @@ static int register_process_cik(struct device_queue_manager *dqm, static int initialize_cpsch_cik(struct device_queue_manager *dqm) { - return init_pipelines(dqm, get_pipes_num(dqm), 0); + return init_pipelines(dqm, get_pipes_num(dqm), get_first_pipe(dqm)); } From 64ea8f4af57cee9f8b0bf542819b41ee82acfcb9 Mon Sep 17 00:00:00 2001 From: Oded Gabbay Date: Tue, 17 Feb 2015 11:30:31 +0200 Subject: [PATCH 06/79] drm/amdkfd: don't set get_pipes_num() as inline get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a warning as BUG_ON() uses static variables when it is expanded. Signed-off-by: Oded Gabbay --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 ++++++ drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h | 7 +------ 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 1b58f331afee2c..910ff8ab9c9cfb 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -68,6 +68,12 @@ unsigned int get_first_pipe(struct device_queue_manager *dqm) return dqm->dev->shared_resources.first_compute_pipe; } +unsigned int get_pipes_num(struct device_queue_manager *dqm) +{ + BUG_ON(!dqm || !dqm->dev); + return dqm->dev->shared_resources.compute_pipe_count; +} + static inline unsigned int get_pipes_num_cpsch(void) { return PIPE_PER_ME_CP_SCHEDULING; diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h index 386bd7df7c3010..488f51d19427a8 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h @@ -164,6 +164,7 @@ void program_sh_mem_settings(struct device_queue_manager *dqm, int init_pipelines(struct device_queue_manager *dqm, unsigned int pipes_num, unsigned int first_pipe); unsigned int get_first_pipe(struct device_queue_manager *dqm); +unsigned int get_pipes_num(struct device_queue_manager *dqm); extern inline unsigned int get_sh_mem_bases_32(struct kfd_process_device *pdd) { @@ -176,10 +177,4 @@ get_sh_mem_bases_nybble_64(struct kfd_process_device *pdd) return (pdd->lds_base >> 60) & 0x0E; } -extern inline unsigned int get_pipes_num(struct device_queue_manager *dqm) -{ - BUG_ON(!dqm || !dqm->dev); - return dqm->dev->shared_resources.compute_pipe_count; -} - #endif /* KFD_DEVICE_QUEUE_MANAGER_H_ */ From d0d62230185e9d1a683bfa5cdfe5e520577f68d1 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 13 Feb 2015 04:06:21 +0000 Subject: [PATCH 07/79] arm64: ftrace: fix ftrace_modify_graph_caller for branch replace ftrace_enable_ftrace_graph_caller and ftrace_disable_ftrace_graph_caller should replace B(jmp) instruction and not BL(call) instruction. Commit 9f1ae7596aad("arm64: Correct ftrace calls to aarch64_insn_gen_branch_imm()") had a typo and used AARCH64_INSN_BRANCH_LINK instead of AARCH64_INSN_BRANCH_NOLINK. Either instruction will work, as the link register is saved/restored across the branch but this better matches the intention of the code. Signed-off-by: Pratyush Anand Signed-off-by: Will Deacon --- arch/arm64/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index cf8556ae09d04a..c851be79508033 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -156,7 +156,7 @@ static int ftrace_modify_graph_caller(bool enable) branch = aarch64_insn_gen_branch_imm(pc, (unsigned long)ftrace_graph_caller, - AARCH64_INSN_BRANCH_LINK); + AARCH64_INSN_BRANCH_NOLINK); nop = aarch64_insn_gen_nop(); if (enable) From 115386f89b5415fcdf641faad0d459cd5c07d225 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 18 Feb 2015 15:40:17 +0000 Subject: [PATCH 08/79] arm64: insn: fix compare-and-branch encodings Fix cbz/cbnz having the mask offset by a bit, and add encodings for tbz/tbnz so that all branch forms are represented. Signed-off-by: Robin Murphy Acked-by: Will Deacon Acked-by: Zi Shen Lim Signed-off-by: Will Deacon --- arch/arm64/include/asm/insn.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index e2ff32a93b5cef..d2f49423c5dcba 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -264,8 +264,10 @@ __AARCH64_INSN_FUNCS(ands, 0x7F200000, 0x6A000000) __AARCH64_INSN_FUNCS(bics, 0x7F200000, 0x6A200000) __AARCH64_INSN_FUNCS(b, 0xFC000000, 0x14000000) __AARCH64_INSN_FUNCS(bl, 0xFC000000, 0x94000000) -__AARCH64_INSN_FUNCS(cbz, 0xFE000000, 0x34000000) -__AARCH64_INSN_FUNCS(cbnz, 0xFE000000, 0x35000000) +__AARCH64_INSN_FUNCS(cbz, 0x7F000000, 0x34000000) +__AARCH64_INSN_FUNCS(cbnz, 0x7F000000, 0x35000000) +__AARCH64_INSN_FUNCS(tbz, 0x7F000000, 0x36000000) +__AARCH64_INSN_FUNCS(tbnz, 0x7F000000, 0x37000000) __AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000) __AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001) __AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002) From f3e39273e0a9a5c9dc78cd667ec3663e97e0e989 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 20 Feb 2015 13:53:13 +0000 Subject: [PATCH 09/79] arm64: guard asm/assembler.h against multiple inclusions asm/assembler.h lacks the usual guard against multiple inclusion, leading to a compilation failure if it is accidentally included twice. Using the classic #ifndef/#define/#endif construct solves the issue. Signed-off-by: Marc Zyngier Signed-off-by: Will Deacon --- arch/arm64/include/asm/assembler.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index 5901480bfdcaf1..750bac4e637e53 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -20,6 +20,9 @@ #error "Only include this from assembly code" #endif +#ifndef __ASM_ASSEMBLER_H +#define __ASM_ASSEMBLER_H + #include #include @@ -155,3 +158,5 @@ lr .req x30 // link register #endif orr \rd, \lbits, \hbits, lsl #32 .endm + +#endif /* __ASM_ASSEMBLER_H */ From 0dc6f20b9803f09726bbb682649d35cda8ef5b5d Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 21 Jan 2015 11:46:32 -0800 Subject: [PATCH 10/79] drm/i915/bdw: PCI IDs ending in 0xb are ULT. When reviewing patch that fixes VGA on BDW Halo Jani noticed that we also had other ULT IDs that weren't listed there. So this follow-up patch add these pci-ids as halo and fix comments on i915_pciids.h Cc: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Rodrigo Vivi Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 1 + include/drm/i915_pciids.h | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f2a825e3964642..b38c770a22f58b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2374,6 +2374,7 @@ struct drm_i915_cmd_table { (INTEL_DEVID(dev) & 0xFF00) == 0x0C00) #define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \ ((INTEL_DEVID(dev) & 0xf) == 0x6 || \ + (INTEL_DEVID(dev) & 0xf) == 0xb || \ (INTEL_DEVID(dev) & 0xf) == 0xe)) #define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \ (INTEL_DEVID(dev) & 0x00F0) == 0x0020) diff --git a/include/drm/i915_pciids.h b/include/drm/i915_pciids.h index 180ad0e6de21dd..d016dc57f0073e 100644 --- a/include/drm/i915_pciids.h +++ b/include/drm/i915_pciids.h @@ -214,9 +214,9 @@ INTEL_VGA_DEVICE((((gt) - 1) << 4) | (id), info) #define _INTEL_BDW_M_IDS(gt, info) \ - _INTEL_BDW_M(gt, 0x1602, info), /* ULT */ \ + _INTEL_BDW_M(gt, 0x1602, info), /* Halo */ \ _INTEL_BDW_M(gt, 0x1606, info), /* ULT */ \ - _INTEL_BDW_M(gt, 0x160B, info), /* Iris */ \ + _INTEL_BDW_M(gt, 0x160B, info), /* ULT */ \ _INTEL_BDW_M(gt, 0x160E, info) /* ULX */ #define _INTEL_BDW_D_IDS(gt, info) \ From dfcc70a8c868fe03276fa59864149708fb41930b Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 23 Feb 2015 22:34:17 +1100 Subject: [PATCH 11/79] xfs: Fix quota type in quota structures when reusing quota file For filesystems without separate project quota inode field in the superblock we just reuse project quota file for group quotas (and vice versa) if project quota file is allocated and we need group quota file. When we reuse the file, quota structures on disk suddenly have wrong type stored in d_flags though. Nobody really cares about this (although structure type reported to userspace was wrong as well) except that after commit 14bf61ffe6ac (quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units) assertion in xfs_qm_scall_getquota() started to trigger on xfs/106 test (apparently I was testing without XFS_DEBUG so I didn't notice when submitting the above commit). Fix the problem by properly resetting ddq->d_flags when running quotacheck for a quota file. CC: stable@vger.kernel.org Reported-by: Al Viro Signed-off-by: Jan Kara Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/xfs_qm.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index 53cc2aaf8d2bdf..fbbb9e62e274b5 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -836,6 +836,11 @@ xfs_qm_reset_dqcounts( */ xfs_dqcheck(mp, ddq, id+j, type, XFS_QMOPT_DQREPAIR, "xfs_quotacheck"); + /* + * Reset type in case we are reusing group quota file for + * project quotas or vice versa + */ + ddq->d_flags = type; ddq->d_bcount = 0; ddq->d_icount = 0; ddq->d_rtbcount = 0; From 5885ebda878b47c4b4602d4b0410cb4b282af024 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Mon, 23 Feb 2015 22:37:08 +1100 Subject: [PATCH 12/79] xfs: ensure truncate forces zeroed blocks to disk A new fsync vs power fail test in xfstests indicated that XFS can have unreliable data consistency when doing extending truncates that require block zeroing. The blocks beyond EOF get zeroed in memory, but we never force those changes to disk before we run the transaction that extends the file size and exposes those blocks to userspace. This can result in the blocks not being correctly zeroed after a crash. Because in-memory behaviour is correct, tools like fsx don't pick up any coherency problems - it's not until the filesystem is shutdown or the system crashes after writing the truncate transaction to the journal but before the zeroed data in the page cache is flushed that the issue is exposed. Fix this by also flushing the dirty data in memory region between the old size and new size when we've found blocks that need zeroing in the truncate process. Reported-by: Liu Bo cc: Signed-off-by: Dave Chinner Reviewed-by: Brian Foster Signed-off-by: Dave Chinner --- fs/xfs/xfs_file.c | 14 ++++++++++---- fs/xfs/xfs_inode.h | 9 +++++---- fs/xfs/xfs_iops.c | 36 ++++++++++++++---------------------- 3 files changed, 29 insertions(+), 30 deletions(-) diff --git a/fs/xfs/xfs_file.c b/fs/xfs/xfs_file.c index ce615d12fb44cf..a2e1cb8a568bf9 100644 --- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -397,7 +397,8 @@ STATIC int /* error (positive) */ xfs_zero_last_block( struct xfs_inode *ip, xfs_fsize_t offset, - xfs_fsize_t isize) + xfs_fsize_t isize, + bool *did_zeroing) { struct xfs_mount *mp = ip->i_mount; xfs_fileoff_t last_fsb = XFS_B_TO_FSBT(mp, isize); @@ -425,6 +426,7 @@ xfs_zero_last_block( zero_len = mp->m_sb.sb_blocksize - zero_offset; if (isize + zero_len > offset) zero_len = offset - isize; + *did_zeroing = true; return xfs_iozero(ip, isize, zero_len); } @@ -443,7 +445,8 @@ int /* error (positive) */ xfs_zero_eof( struct xfs_inode *ip, xfs_off_t offset, /* starting I/O offset */ - xfs_fsize_t isize) /* current inode size */ + xfs_fsize_t isize, /* current inode size */ + bool *did_zeroing) { struct xfs_mount *mp = ip->i_mount; xfs_fileoff_t start_zero_fsb; @@ -465,7 +468,7 @@ xfs_zero_eof( * We only zero a part of that block so it is handled specially. */ if (XFS_B_FSB_OFFSET(mp, isize) != 0) { - error = xfs_zero_last_block(ip, offset, isize); + error = xfs_zero_last_block(ip, offset, isize, did_zeroing); if (error) return error; } @@ -525,6 +528,7 @@ xfs_zero_eof( if (error) return error; + *did_zeroing = true; start_zero_fsb = imap.br_startoff + imap.br_blockcount; ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); } @@ -567,13 +571,15 @@ xfs_file_aio_write_checks( * having to redo all checks before. */ if (*pos > i_size_read(inode)) { + bool zero = false; + if (*iolock == XFS_IOLOCK_SHARED) { xfs_rw_iunlock(ip, *iolock); *iolock = XFS_IOLOCK_EXCL; xfs_rw_ilock(ip, *iolock); goto restart; } - error = xfs_zero_eof(ip, *pos, i_size_read(inode)); + error = xfs_zero_eof(ip, *pos, i_size_read(inode), &zero); if (error) return error; } diff --git a/fs/xfs/xfs_inode.h b/fs/xfs/xfs_inode.h index 86cd6b39bed7be..a1cd55f3f351e1 100644 --- a/fs/xfs/xfs_inode.h +++ b/fs/xfs/xfs_inode.h @@ -384,10 +384,11 @@ enum xfs_prealloc_flags { XFS_PREALLOC_INVISIBLE = (1 << 4), }; -int xfs_update_prealloc_flags(struct xfs_inode *, - enum xfs_prealloc_flags); -int xfs_zero_eof(struct xfs_inode *, xfs_off_t, xfs_fsize_t); -int xfs_iozero(struct xfs_inode *, loff_t, size_t); +int xfs_update_prealloc_flags(struct xfs_inode *ip, + enum xfs_prealloc_flags flags); +int xfs_zero_eof(struct xfs_inode *ip, xfs_off_t offset, + xfs_fsize_t isize, bool *did_zeroing); +int xfs_iozero(struct xfs_inode *ip, loff_t pos, size_t count); #define IHOLD(ip) \ diff --git a/fs/xfs/xfs_iops.c b/fs/xfs/xfs_iops.c index d919ad7b16bf9a..e53a903314225c 100644 --- a/fs/xfs/xfs_iops.c +++ b/fs/xfs/xfs_iops.c @@ -751,6 +751,7 @@ xfs_setattr_size( int error; uint lock_flags = 0; uint commit_flags = 0; + bool did_zeroing = false; trace_xfs_setattr(ip); @@ -794,20 +795,16 @@ xfs_setattr_size( return error; /* - * Now we can make the changes. Before we join the inode to the - * transaction, take care of the part of the truncation that must be - * done without the inode lock. This needs to be done before joining - * the inode to the transaction, because the inode cannot be unlocked - * once it is a part of the transaction. + * File data changes must be complete before we start the transaction to + * modify the inode. This needs to be done before joining the inode to + * the transaction because the inode cannot be unlocked once it is a + * part of the transaction. + * + * Start with zeroing any data block beyond EOF that we may expose on + * file extension. */ if (newsize > oldsize) { - /* - * Do the first part of growing a file: zero any data in the - * last block that is beyond the old EOF. We need to do this - * before the inode is joined to the transaction to modify - * i_size. - */ - error = xfs_zero_eof(ip, newsize, oldsize); + error = xfs_zero_eof(ip, newsize, oldsize, &did_zeroing); if (error) return error; } @@ -817,23 +814,18 @@ xfs_setattr_size( * any previous writes that are beyond the on disk EOF and the new * EOF that have not been written out need to be written here. If we * do not write the data out, we expose ourselves to the null files - * problem. - * - * Only flush from the on disk size to the smaller of the in memory - * file size or the new size as that's the range we really care about - * here and prevents waiting for other data not within the range we - * care about here. + * problem. Note that this includes any block zeroing we did above; + * otherwise those blocks may not be zeroed after a crash. */ - if (oldsize != ip->i_d.di_size && newsize > ip->i_d.di_size) { + if (newsize > ip->i_d.di_size && + (oldsize != ip->i_d.di_size || did_zeroing)) { error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, ip->i_d.di_size, newsize); if (error) return error; } - /* - * Wait for all direct I/O to complete. - */ + /* Now wait for all direct I/O to complete. */ inode_dio_wait(inode); /* From f75fb42a6164a4c7f5bb6cbaae65555db89904a8 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 10 Feb 2015 13:15:49 +0200 Subject: [PATCH 13/79] drm/i915/skl: handle all pixel formats in skylake_update_primary_plane() skylake_update_primary_plane() did not handle all pixel formats returned by skl_format_to_fourcc(). Handle alpha similar to skl_update_plane(). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89052 Reviewed-by: Damien Lespiau Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3d220a67f8656e..f392e182184b3e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2725,10 +2725,19 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc, case DRM_FORMAT_XRGB8888: plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; break; + case DRM_FORMAT_ARGB8888: + plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; + plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY; + break; case DRM_FORMAT_XBGR8888: plane_ctl |= PLANE_CTL_ORDER_RGBX; plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; break; + case DRM_FORMAT_ABGR8888: + plane_ctl |= PLANE_CTL_ORDER_RGBX; + plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888; + plane_ctl |= PLANE_CTL_ALPHA_SW_PREMULTIPLY; + break; case DRM_FORMAT_XRGB2101010: plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010; break; From cf6f0af9fbdd90b81af14fa6375387131cd8adf1 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 19 Feb 2015 10:53:39 +0200 Subject: [PATCH 14/79] drm/i915: Dell Chromebook 11 has PWM backlight Add quirk for Dell Chromebook 11 backlight. Reported-and-tested-by: Owen Garland Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93451 Acked-by: Damien Lespiau Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f392e182184b3e..2adedee7e52a0b 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -13105,6 +13105,9 @@ static struct intel_quirk intel_quirks[] = { /* HP Chromebook 14 (Celeron 2955U) */ { 0x0a06, 0x103c, 0x21ed, quirk_backlight_present }, + + /* Dell Chromebook 11 */ + { 0x0a06, 0x1028, 0x0a35, quirk_backlight_present }, }; static void intel_init_quirks(struct drm_device *dev) From 52b68d7ef8838b4322da3dc35a05e02c63b05a0d Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 23 Feb 2015 09:16:21 -0700 Subject: [PATCH 15/79] NVMe: Fix for BLK_DEV_INTEGRITY not set Need to define and use appropriate functions for when BLK_DEV_INTEGRITY is not set. Reported-by: Fengguang Wu Signed-off-by: Keith Busch Signed-off-by: Jens Axboe --- drivers/block/nvme-core.c | 99 +++++++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 41 deletions(-) diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c index b64bccbb78c9a5..ceb32dd52a6ca5 100644 --- a/drivers/block/nvme-core.c +++ b/drivers/block/nvme-core.c @@ -482,6 +482,7 @@ static int nvme_error_status(u16 status) } } +#ifdef CONFIG_BLK_DEV_INTEGRITY static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi) { if (be32_to_cpu(pi->ref_tag) == v) @@ -538,6 +539,58 @@ static void nvme_dif_remap(struct request *req, kunmap_atomic(pmap); } +static int nvme_noop_verify(struct blk_integrity_iter *iter) +{ + return 0; +} + +static int nvme_noop_generate(struct blk_integrity_iter *iter) +{ + return 0; +} + +struct blk_integrity nvme_meta_noop = { + .name = "NVME_META_NOOP", + .generate_fn = nvme_noop_generate, + .verify_fn = nvme_noop_verify, +}; + +static void nvme_init_integrity(struct nvme_ns *ns) +{ + struct blk_integrity integrity; + + switch (ns->pi_type) { + case NVME_NS_DPS_PI_TYPE3: + integrity = t10_pi_type3_crc; + break; + case NVME_NS_DPS_PI_TYPE1: + case NVME_NS_DPS_PI_TYPE2: + integrity = t10_pi_type1_crc; + break; + default: + integrity = nvme_meta_noop; + break; + } + integrity.tuple_size = ns->ms; + blk_integrity_register(ns->disk, &integrity); + blk_queue_max_integrity_segments(ns->queue, 1); +} +#else /* CONFIG_BLK_DEV_INTEGRITY */ +static void nvme_dif_remap(struct request *req, + void (*dif_swap)(u32 p, u32 v, struct t10_pi_tuple *pi)) +{ +} +static void nvme_dif_prep(u32 p, u32 v, struct t10_pi_tuple *pi) +{ +} +static void nvme_dif_complete(u32 p, u32 v, struct t10_pi_tuple *pi) +{ +} +static void nvme_init_integrity(struct nvme_ns *ns) +{ +} +#endif + static void req_completion(struct nvme_queue *nvmeq, void *ctx, struct nvme_completion *cqe) { @@ -1959,43 +2012,6 @@ static void nvme_config_discard(struct nvme_ns *ns) queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, ns->queue); } -static int nvme_noop_verify(struct blk_integrity_iter *iter) -{ - return 0; -} - -static int nvme_noop_generate(struct blk_integrity_iter *iter) -{ - return 0; -} - -struct blk_integrity nvme_meta_noop = { - .name = "NVME_META_NOOP", - .generate_fn = nvme_noop_generate, - .verify_fn = nvme_noop_verify, -}; - -static void nvme_init_integrity(struct nvme_ns *ns) -{ - struct blk_integrity integrity; - - switch (ns->pi_type) { - case NVME_NS_DPS_PI_TYPE3: - integrity = t10_pi_type3_crc; - break; - case NVME_NS_DPS_PI_TYPE1: - case NVME_NS_DPS_PI_TYPE2: - integrity = t10_pi_type1_crc; - break; - default: - integrity = nvme_meta_noop; - break; - } - integrity.tuple_size = ns->ms; - blk_integrity_register(ns->disk, &integrity); - blk_queue_max_integrity_segments(ns->queue, 1); -} - static int nvme_revalidate_disk(struct gendisk *disk) { struct nvme_ns *ns = disk->private_data; @@ -2036,7 +2052,8 @@ static int nvme_revalidate_disk(struct gendisk *disk) pi_type = ns->ms == sizeof(struct t10_pi_tuple) ? id->dps & NVME_NS_DPS_PI_MASK : 0; - if (disk->integrity && (ns->pi_type != pi_type || ns->ms != old_ms || + if (blk_get_integrity(disk) && (ns->pi_type != pi_type || + ns->ms != old_ms || bs != queue_logical_block_size(disk->queue) || (ns->ms && id->flbas & NVME_NS_FLBAS_META_EXT))) blk_integrity_unregister(disk); @@ -2044,11 +2061,11 @@ static int nvme_revalidate_disk(struct gendisk *disk) ns->pi_type = pi_type; blk_queue_logical_block_size(ns->queue, bs); - if (ns->ms && !disk->integrity && (disk->flags & GENHD_FL_UP) && + if (ns->ms && !blk_get_integrity(disk) && (disk->flags & GENHD_FL_UP) && !(id->flbas & NVME_NS_FLBAS_META_EXT)) nvme_init_integrity(ns); - if (id->ncap == 0 || (ns->ms && !disk->integrity)) + if (id->ncap == 0 || (ns->ms && !blk_get_integrity(disk))) set_capacity(disk, 0); else set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9)); @@ -2652,7 +2669,7 @@ static void nvme_dev_remove(struct nvme_dev *dev) list_for_each_entry(ns, &dev->namespaces, list) { if (ns->disk->flags & GENHD_FL_UP) { - if (ns->disk->integrity) + if (blk_get_integrity(ns->disk)) blk_integrity_unregister(ns->disk); del_gendisk(ns->disk); } From f0774d884bad7007b54cfffb5c93c23420c75aa6 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Mon, 23 Feb 2015 05:38:00 -0500 Subject: [PATCH 16/79] mm: shmem: check for mapping owner before dereferencing mapping->host can be NULL and shouldn't be dereferenced before being checked. [ 1295.741844] GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP KASAN [ 1295.746387] Dumping ftrace buffer: [ 1295.748217] (ftrace buffer empty) [ 1295.749527] Modules linked in: [ 1295.750268] CPU: 62 PID: 23410 Comm: trinity-c70 Not tainted 3.19.0-next-20150219-sasha-00045-g9130270f #1939 [ 1295.750268] task: ffff8803a49db000 ti: ffff8803a4dc8000 task.ti: ffff8803a4dc8000 [ 1295.750268] RIP: shmem_mapping (mm/shmem.c:1458) [ 1295.750268] RSP: 0000:ffff8803a4dcfbf8 EFLAGS: 00010206 [ 1295.750268] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 00000000000f2804 [ 1295.750268] RDX: 0000000000000005 RSI: 0400000000000794 RDI: 0000000000000028 [ 1295.750268] RBP: ffff8803a4dcfc08 R08: 0000000000000000 R09: 00000000031de000 [ 1295.750268] R10: dffffc0000000000 R11: 00000000031c1000 R12: 0400000000000794 [ 1295.750268] R13: 00000000031c2000 R14: 00000000031de000 R15: ffff880e3bdc1000 [ 1295.750268] FS: 00007f8703c7e700(0000) GS:ffff881164800000(0000) knlGS:0000000000000000 [ 1295.750268] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1295.750268] CR2: 0000000004e58000 CR3: 00000003a9f3c000 CR4: 00000000000007a0 [ 1295.750268] DR0: ffffffff81000000 DR1: 0000009494949494 DR2: 0000000000000000 [ 1295.750268] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 00000000000d0602 [ 1295.750268] Stack: [ 1295.750268] ffff8803a4dcfec8 ffffffffbb1dc770 ffff8803a4dcfc38 ffffffffad6f230b [ 1295.750268] ffffffffad6f2b0d 0000014100000000 ffff88001e17c08b ffff880d9453fe08 [ 1295.750268] ffff8803a4dcfd18 ffffffffad6f2ce2 ffff8803a49dbcd8 ffff8803a49dbce0 [ 1295.750268] Call Trace: [ 1295.750268] mincore_page (mm/mincore.c:61) [ 1295.750268] ? mincore_pte_range (include/linux/spinlock.h:312 mm/mincore.c:131) [ 1295.750268] mincore_pte_range (mm/mincore.c:151) [ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113) [ 1295.750268] __walk_page_range (mm/pagewalk.c:51 mm/pagewalk.c:90 mm/pagewalk.c:116 mm/pagewalk.c:204) [ 1295.750268] walk_page_range (mm/pagewalk.c:275) [ 1295.750268] SyS_mincore (mm/mincore.c:191 mm/mincore.c:253 mm/mincore.c:220) [ 1295.750268] ? mincore_pte_range (mm/mincore.c:220) [ 1295.750268] ? mincore_unmapped_range (mm/mincore.c:113) [ 1295.750268] ? __mincore_unmapped_range (mm/mincore.c:105) [ 1295.750268] ? ptlock_free (mm/mincore.c:24) [ 1295.750268] ? syscall_trace_enter (arch/x86/kernel/ptrace.c:1610) [ 1295.750268] ia32_do_call (arch/x86/ia32/ia32entry.S:446) [ 1295.750268] Code: e5 48 c1 ea 03 53 48 89 fb 48 83 ec 08 80 3c 02 00 75 4f 48 b8 00 00 00 00 00 fc ff df 48 8b 1b 48 8d 7b 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 75 3f 48 b8 00 00 00 00 00 fc ff df 48 8b 5b 28 48 All code ======== 0: e5 48 in $0x48,%eax 2: c1 ea 03 shr $0x3,%edx 5: 53 push %rbx 6: 48 89 fb mov %rdi,%rbx 9: 48 83 ec 08 sub $0x8,%rsp d: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 11: 75 4f jne 0x62 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 48 8b 1b mov (%rbx),%rbx 20: 48 8d 7b 28 lea 0x28(%rbx),%rdi 24: 48 89 fa mov %rdi,%rdx 27: 48 c1 ea 03 shr $0x3,%rdx 2b:* 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2f: 75 3f jne 0x70 31: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 38: fc ff df 3b: 48 8b 5b 28 mov 0x28(%rbx),%rbx 3f: 48 rex.W ... Code starting with the faulting instruction =========================================== 0: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) 4: 75 3f jne 0x45 6: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax d: fc ff df 10: 48 8b 5b 28 mov 0x28(%rbx),%rbx 14: 48 rex.W ... [ 1295.750268] RIP shmem_mapping (mm/shmem.c:1458) [ 1295.750268] RSP Fixes: 97b713ba3e ("fs: kill BDI_CAP_SWAP_BACKED") Signed-off-by: Sasha Levin Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe --- mm/shmem.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index 2f17cb5f00a43f..cf2d0ca010bc52 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1455,6 +1455,9 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode bool shmem_mapping(struct address_space *mapping) { + if (!mapping->host) + return false; + return mapping->host->i_sb->s_op == &shmem_ops; } From a5cb514f1f689a48595370a368b568e2f551ddfd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 3 Dec 2014 14:41:47 +0100 Subject: [PATCH 17/79] drivers: sh: Disable PM runtime for multi-platform r8a7740 with genpd If the default PM domain using PM_CLK is used for PM runtime, the real PM domain(s) cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on an r8a7740. The R-Mobile PM domain driver will take care of PM runtime management of the module clocks. The default PM domain is still needed for: - platforms without genpd support, - the legacy (non-DT) case, where genpd may take over later, except for the C5 "always on" PM domain. Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- drivers/sh/pm_runtime.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/sh/pm_runtime.c b/drivers/sh/pm_runtime.c index f3ee439d6f0e23..cd4c293f0dd0d3 100644 --- a/drivers/sh/pm_runtime.c +++ b/drivers/sh/pm_runtime.c @@ -81,7 +81,9 @@ static int __init sh_pm_runtime_init(void) if (!of_machine_is_compatible("renesas,emev2") && !of_machine_is_compatible("renesas,r7s72100") && !of_machine_is_compatible("renesas,r8a73a4") && +#ifndef CONFIG_PM_GENERIC_DOMAINS_OF !of_machine_is_compatible("renesas,r8a7740") && +#endif !of_machine_is_compatible("renesas,r8a7778") && !of_machine_is_compatible("renesas,r8a7779") && !of_machine_is_compatible("renesas,r8a7790") && From fc921566f4fcf4499e9a6d010391c00be199ab85 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 24 Feb 2015 10:12:55 +1100 Subject: [PATCH 18/79] xfs: Ensure we have target_ip for RENAME_EXCHANGE We shouldn't get here with RENAME_EXCHANGE set and no target_ip, but let's be defensive, because xfs_cross_rename() will dereference it. Spotted by Coverity. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Signed-off-by: Dave Chinner --- fs/xfs/xfs_inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index daafa1f6d26077..6163767aa8562f 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2867,6 +2867,10 @@ xfs_rename( * Handle RENAME_EXCHANGE flags */ if (flags & RENAME_EXCHANGE) { + if (target_ip == NULL) { + error = -EINVAL; + goto error_return; + } error = xfs_cross_rename(tp, src_dp, src_name, src_ip, target_dp, target_name, target_ip, &free_list, &first_block, spaceres); From 83d5f01858b56db69c8e4ca5389ef7c29bfdb5dd Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Tue, 24 Feb 2015 10:15:18 +1100 Subject: [PATCH 19/79] xfs: cancel failed transaction in xfs_fs_commit_blocks() If xfs_trans_reserve fails we don't cancel the transaction, and we'll leak the allocated transaction pointer. Spotted by Coverity. Signed-off-by: Eric Sandeen Reviewed-by: Christoph Hellwig Signed-off-by: Dave Chinner --- fs/xfs/xfs_pnfs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_pnfs.c b/fs/xfs/xfs_pnfs.c index 4b33ef112400cc..365dd57ea760dd 100644 --- a/fs/xfs/xfs_pnfs.c +++ b/fs/xfs/xfs_pnfs.c @@ -300,8 +300,10 @@ xfs_fs_commit_blocks( tp = xfs_trans_alloc(mp, XFS_TRANS_SETATTR_NOT_SIZE); error = xfs_trans_reserve(tp, &M_RES(mp)->tr_ichange, 0, 0); - if (error) + if (error) { + xfs_trans_cancel(tp, 0); goto out_drop_iolock; + } xfs_ilock(ip, XFS_ILOCK_EXCL); xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); From 2caa80e72b57c6216aec6f6a11fcfb4fec46daa0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 22 Feb 2015 11:38:36 +0100 Subject: [PATCH 20/79] drm: Fix deadlock due to getconnector locking changes In commit ccfc08655d5fd5076828f45fb09194c070f2f63a Author: Rob Clark Date: Thu Dec 18 16:01:48 2014 -0500 drm: tweak getconnector locking We need to extend the locking to cover connector->state reading for atomic drivers, but the above commit was a bit too eager and also included the fill_modes callback. Which on i915 on old platforms using load detection needs to acquire modeset locks, resulting in a deadlock on output probing. Reported-by: Marc Finet Cc: Marc Finet Cc: robdclark@gmail.com Signed-off-by: Daniel Vetter Reviewed-by: Rob Clark Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 6b00173d1be4fd..6b6b07ff720ba6 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -2127,7 +2127,6 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, DRM_DEBUG_KMS("[CONNECTOR:%d:?]\n", out_resp->connector_id); mutex_lock(&dev->mode_config.mutex); - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); connector = drm_connector_find(dev, out_resp->connector_id); if (!connector) { @@ -2157,6 +2156,8 @@ int drm_mode_getconnector(struct drm_device *dev, void *data, out_resp->mm_height = connector->display_info.height_mm; out_resp->subpixel = connector->display_info.subpixel_order; out_resp->connection = connector->status; + + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); encoder = drm_connector_get_encoder(connector); if (encoder) out_resp->encoder_id = encoder->base.id; From bd4248bb5e8b41f88a2789ee124dce3e9ec4f227 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 6 Feb 2015 16:04:08 +0100 Subject: [PATCH 21/79] drm: atmel-hlcdc: reset layer A2Q and UPDATE bits when disabling it The A2Q (Add To Queue) and UPDATE bits are left in their previous state when resetting the layer. This lead to weird behavior when enabling the plane again: the framebuffer previously queued is dequeued and we end up with access to an old memory region. Reset those bits when resetting the channel. Signed-off-by: Boris Brezillon --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c index 063d2a7b941fca..e79bd9ba474b3c 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_layer.c @@ -311,7 +311,8 @@ int atmel_hlcdc_layer_disable(struct atmel_hlcdc_layer *layer) /* Disable the layer */ regmap_write(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_CHDR, - ATMEL_HLCDC_LAYER_RST); + ATMEL_HLCDC_LAYER_RST | ATMEL_HLCDC_LAYER_A2Q | + ATMEL_HLCDC_LAYER_UPDATE); /* Clear all pending interrupts */ regmap_read(regmap, desc->regs_offset + ATMEL_HLCDC_LAYER_ISR, &isr); From 0f2cfa81161359a7be255f7bd5aec2ff3460a5c9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 10 Feb 2015 16:23:00 +0100 Subject: [PATCH 22/79] drm: atmel-hlcdc: remove useless pm_runtime_put_sync in probe Remove a useless pm_runtime_put_sync leading to unbalanced usage_count. Signed-off-by: Boris Brezillon Reported-by: Sylvain Rochet --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c index 7320a6c6613f17..c1cb17493e0d4e 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c @@ -311,8 +311,6 @@ static int atmel_hlcdc_dc_load(struct drm_device *dev) pm_runtime_enable(dev->dev); - pm_runtime_put_sync(dev->dev); - ret = atmel_hlcdc_dc_modeset_init(dev); if (ret < 0) { dev_err(dev->dev, "failed to initialize mode setting\n"); From b3a38998f042b862f5ba4d7f2268f3a8dfb4883a Mon Sep 17 00:00:00 2001 From: Nick Hoath Date: Thu, 19 Feb 2015 16:30:47 +0000 Subject: [PATCH 23/79] drm/i915: Fix a use after free, and unbalanced refcounting When converting from implicitly tracked execlist queue items to ref counted requests, not all frees of requests were replaced with unrefs, and extraneous refs/unrefs of contexts were added. Correct the unbalanced refcount & replace the frees. Remove a noisy warning when hitting the request creation path. drm_i915_gem_request and intel_context are both kref reference counted structures. Upon allocation, drm_i915_gem_request's ref count should be bumped using kref_init. When a context is assigned to the request, the context's reference count should be bumped using i915_gem_context_reference. i915_gem_request_reference will reduce the context reference count when the request is freed. Problem introduced in commit 6d3d8274bc45de4babb62d64562d92af984dd238 Author: Nick Hoath AuthorDate: Thu Jan 15 13:10:39 2015 +0000 drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request v2: Added comments explaining how the ctx pointer and the request object should be ref-counted. Removed noisy warning. v3: Cleaned up the language used in the commit & the header description (Thanks David Gordon) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652 Signed-off-by: Nick Hoath Reviewed-by: Thomas Daniel Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 14 +++++++++++++- drivers/gpu/drm/i915/i915_gem.c | 3 +-- drivers/gpu/drm/i915/intel_lrc.c | 8 ++++---- 3 files changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index b38c770a22f58b..8727086cf48ccc 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2114,6 +2114,9 @@ void i915_gem_track_fb(struct drm_i915_gem_object *old, * number comparisons on buffer last_read|write_seqno. It also allows an * emission time to be associated with the request for tracking how far ahead * of the GPU the submission is. + * + * The requests are reference counted, so upon creation they should have an + * initial reference taken using kref_init */ struct drm_i915_gem_request { struct kref ref; @@ -2137,7 +2140,16 @@ struct drm_i915_gem_request { /** Position in the ringbuffer of the end of the whole request */ u32 tail; - /** Context related to this request */ + /** + * Context related to this request + * Contexts are refcounted, so when this request is associated with a + * context, we must increment the context's refcount, to guarantee that + * it persists while any request is linked to it. Requests themselves + * are also refcounted, so the request will only be freed when the last + * reference to it is dismissed, and the code in + * i915_gem_request_free() will then decrement the refcount on the + * context. + */ struct intel_context *ctx; /** Batch buffer related to this request if any */ diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index c26d36cc4b313a..e5daad5f75fb96 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2659,8 +2659,7 @@ static void i915_gem_reset_ring_cleanup(struct drm_i915_private *dev_priv, if (submit_req->ctx != ring->default_context) intel_lr_context_unpin(ring, submit_req->ctx); - i915_gem_context_unreference(submit_req->ctx); - kfree(submit_req); + i915_gem_request_unreference(submit_req); } /* diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 0f358c5999ec8e..e8d3da9f337388 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -503,18 +503,19 @@ static int execlists_context_queue(struct intel_engine_cs *ring, * If there isn't a request associated with this submission, * create one as a temporary holder. */ - WARN(1, "execlist context submission without request"); request = kzalloc(sizeof(*request), GFP_KERNEL); if (request == NULL) return -ENOMEM; request->ring = ring; request->ctx = to; + kref_init(&request->ref); + request->uniq = dev_priv->request_uniq++; + i915_gem_context_reference(request->ctx); } else { + i915_gem_request_reference(request); WARN_ON(to != request->ctx); } request->tail = tail; - i915_gem_request_reference(request); - i915_gem_context_reference(request->ctx); intel_runtime_pm_get(dev_priv); @@ -731,7 +732,6 @@ void intel_execlists_retire_requests(struct intel_engine_cs *ring) if (ctx_obj && (ctx != ring->default_context)) intel_lr_context_unpin(ring, ctx); intel_runtime_pm_put(dev_priv); - i915_gem_context_unreference(ctx); list_del(&req->execlist_link); i915_gem_request_unreference(req); } From 6c31a614c43ae274546f736b2a33363e149c3dc2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 12 Feb 2015 07:53:18 +0000 Subject: [PATCH 24/79] drm/i915: Check obj->vma_list under the struct_mutex When we walk the list of vma, or even for protecting against concurrent framebuffer creation, we must hold the struct_mutex or else a second thread can corrupt the list as we walk it. Fixes regression from commit d7f46fc4e7323887494db13f063a8e59861fefb0 Author: Ben Widawsky Date: Fri Dec 6 14:10:55 2013 -0800 drm/i915: Make pin count per VMA References: https://bugs.freedesktop.org/show_bug.cgi?id=89085 Signed-off-by: Chris Wilson Reviewed-by: Daniel Vetter Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_tiling.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 7a24bd1a51f648..6377b22269ad1e 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -335,9 +335,10 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, return -EINVAL; } + mutex_lock(&dev->struct_mutex); if (i915_gem_obj_is_pinned(obj) || obj->framebuffer_references) { - drm_gem_object_unreference_unlocked(&obj->base); - return -EBUSY; + ret = -EBUSY; + goto err; } if (args->tiling_mode == I915_TILING_NONE) { @@ -369,7 +370,6 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, } } - mutex_lock(&dev->struct_mutex); if (args->tiling_mode != obj->tiling_mode || args->stride != obj->stride) { /* We need to rebind the object if its current allocation @@ -424,6 +424,7 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, obj->bit_17 = NULL; } +err: drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); From 2dd2a883aad7c852400027c2261bcab69d9e238e Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 24 Feb 2015 11:14:30 +0200 Subject: [PATCH 25/79] drm/i915: avoid processing spurious/shared interrupts in low-power states Atm, it's possible that the interrupt handler is called when the device is in D3 or some other low-power state. It can be due to another device that is still in D0 state and shares the interrupt line with i915, or on some platforms there could be spurious interrupts even without sharing the interrupt line. The latter case was reported by Klaus Ethgen using a Lenovo x61p machine (gen 4). He noticed this issue via a system suspend/resume hang and bisected it to the following commit: commit e11aa362308f5de467ce355a2a2471321b15a35c Author: Jesse Barnes Date: Wed Jun 18 09:52:55 2014 -0700 drm/i915: use runtime irq suspend/resume in freeze/thaw This is a problem, since in low-power states IIR will always read 0xffffffff resulting in an endless IRQ servicing loop. Fix this by handling interrupts only when the driver explicitly enables them and so it's guaranteed that the interrupt registers return a valid value. Note that this issue existed even before the above commit, since during runtime suspend/resume we never unregistered the handler. v2: - clarify the purpose of smp_mb() vs. synchronize_irq() in the code comment (Chris) v3: - no need for an explicit smp_mb(), we can assume that synchronize_irq() and the mmio read/writes in the install hooks provide for this (Daniel) - remove code comment as the remaining synchronize_irq() is self explanatory (Daniel) v4: - drm_irq_uninstall() implies synchronize_irq(), so no need to call it explicitly (Daniel) Reference: https://lkml.org/lkml/2015/2/11/205 Reported-and-bisected-by: Klaus Ethgen Cc: stable@vger.kernel.org Signed-off-by: Imre Deak Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_irq.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 4145d95902f54f..ede5bbbd8a08a1 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1892,6 +1892,9 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg) u32 iir, gt_iir, pm_iir; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + while (true) { /* Find, clear, then process each source of interrupt */ @@ -1936,6 +1939,9 @@ static irqreturn_t cherryview_irq_handler(int irq, void *arg) u32 master_ctl, iir; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + for (;;) { master_ctl = I915_READ(GEN8_MASTER_IRQ) & ~GEN8_MASTER_IRQ_CONTROL; iir = I915_READ(VLV_IIR); @@ -2208,6 +2214,9 @@ static irqreturn_t ironlake_irq_handler(int irq, void *arg) u32 de_iir, gt_iir, de_ier, sde_ier = 0; irqreturn_t ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + /* We get interrupts on unclaimed registers, so check for this before we * do any I915_{READ,WRITE}. */ intel_uncore_check_errors(dev); @@ -2279,6 +2288,9 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg) enum pipe pipe; u32 aux_mask = GEN8_AUX_CHANNEL_A; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + if (IS_GEN9(dev)) aux_mask |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | GEN9_AUX_CHANNEL_D; @@ -3771,6 +3783,9 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ16(IIR); if (iir == 0) return IRQ_NONE; @@ -3951,6 +3966,9 @@ static irqreturn_t i915_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; int pipe, ret = IRQ_NONE; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ(IIR); do { bool irq_received = (iir & ~flip_mask) != 0; @@ -4171,6 +4189,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg) I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT | I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT; + if (!intel_irqs_enabled(dev_priv)) + return IRQ_NONE; + iir = I915_READ(IIR); for (;;) { @@ -4520,6 +4541,7 @@ void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv) { dev_priv->dev->driver->irq_uninstall(dev_priv->dev); dev_priv->pm.irqs_enabled = false; + synchronize_irq(dev_priv->dev->irq); } /** From f37b5c2be8979993efee2da50b51126e3908eb8b Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 10 Feb 2015 23:12:27 +0100 Subject: [PATCH 26/79] drm/i915: Align initial plane backing objects correctly Some bios really like to joke and start the planes at an offset ... hooray! Align start and end to fix this. v2: Fixup calculation of size, spotted by Chris Wilson. v3: Fix serious fumble I've just spotted. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86883 Cc: stable@vger.kernel.org Cc: Johannes W Cc: Chris Wilson Cc: Jani Nikula Reported-and-tested-by: Johannes W Signed-off-by: Daniel Vetter [Jani: split WARN_ONs, rebase on v4.0-rc1] Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_stolen.c | 6 ++---- drivers/gpu/drm/i915/intel_display.c | 18 ++++++++++++------ 2 files changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c index a2045848bd1a3d..9c6f93ec886b70 100644 --- a/drivers/gpu/drm/i915/i915_gem_stolen.c +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c @@ -485,10 +485,8 @@ i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev, stolen_offset, gtt_offset, size); /* KISS and expect everything to be page-aligned */ - BUG_ON(stolen_offset & 4095); - BUG_ON(size & 4095); - - if (WARN_ON(size == 0)) + if (WARN_ON(size == 0) || WARN_ON(size & 4095) || + WARN_ON(stolen_offset & 4095)) return NULL; stolen = kzalloc(sizeof(*stolen), GFP_KERNEL); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2adedee7e52a0b..bf19a5cce4a8ba 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2371,13 +2371,19 @@ intel_alloc_plane_obj(struct intel_crtc *crtc, struct drm_device *dev = crtc->base.dev; struct drm_i915_gem_object *obj = NULL; struct drm_mode_fb_cmd2 mode_cmd = { 0 }; - u32 base = plane_config->base; + u32 base_aligned = round_down(plane_config->base, PAGE_SIZE); + u32 size_aligned = round_up(plane_config->base + plane_config->size, + PAGE_SIZE); + + size_aligned -= base_aligned; if (plane_config->size == 0) return false; - obj = i915_gem_object_create_stolen_for_preallocated(dev, base, base, - plane_config->size); + obj = i915_gem_object_create_stolen_for_preallocated(dev, + base_aligned, + base_aligned, + size_aligned); if (!obj) return false; @@ -6636,7 +6642,7 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe/plane %c/%d with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), plane, fb->width, fb->height, @@ -7673,7 +7679,7 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = ALIGN(fb->pitches[0] * aligned_height, PAGE_SIZE); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), fb->width, fb->height, @@ -7764,7 +7770,7 @@ ironlake_get_initial_plane_config(struct intel_crtc *crtc, aligned_height = intel_fb_align_height(dev, fb->height, plane_config->tiling); - plane_config->size = PAGE_ALIGN(fb->pitches[0] * aligned_height); + plane_config->size = fb->pitches[0] * aligned_height; DRM_DEBUG_KMS("pipe %c with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n", pipe_name(pipe), fb->width, fb->height, From 773c5a0fca5b08af7cce87785e4a99b4c1ac36bf Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 13 Jan 2015 14:23:21 +0200 Subject: [PATCH 27/79] ARM: dts: DRA7: Fix SATA PHY node The sata_ref_clk is a reference clock to the SATA phy. This fixes SATA malfunction across suspend/resume or when SATA driver is used as a module. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5827fedafd43d5..853d37d96007fc 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1090,8 +1090,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin1>; - clock-names = "sysclk"; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; From a0182724abd82ad90e0312db0da60a2f2d0442f1 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 13 Jan 2015 14:23:22 +0200 Subject: [PATCH 28/79] ARM: dts: OMAP5: Fix SATA PHY node The sata_ref_clk is a reference clock to the SATA phy. This fixes SATA malfunction across suspend/resume or when SATA driver is used as a module. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index b321fdf42c9f3c..bb498e7cc0f1a4 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -929,8 +929,8 @@ <0x4A096800 0x40>; /* pll_ctrl */ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_sata>; - clocks = <&sys_clkin>; - clock-names = "sysclk"; + clocks = <&sys_clkin>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; #phy-cells = <0>; }; }; From a54879a0085993c06be5630321d962d6b48e134f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Feb 2015 08:48:52 -0800 Subject: [PATCH 29/79] ARM: dts: Fix USB dts configuration for dm816x Commit 7800064ba507 ("ARM: dts: Add basic dm816x device tree configuration") added basic devices for dm816x, but I was not able to test the USB completely because of an unconfigured USB phy, and I only tested it to make sure the Mentor chips are detected and clocked without a phy. After testing the USB with actual devices I noticed a few issues that should be fixed to avoid confusion: - The USB id pin on dm8168-evm is hardwired and can be changed only by software. As there are two USB-A type connectors, let's start both in host mode instead of otg. - The Mentor core is configured in such a way on dm8168-evm that it's not capable of multipoint at least on revision c board that I have. - We need ranges for the syscon to properly set up the phy as children of the SCM syscon area. - Let's not disable the second interface, the board specific dts files can do that if really needed. Most boards should just keep it enabled to ensure the device is idled properly. Note that also a phy and several musb fixes are still needed to make the USB to work properly in addition to this fix. Cc: Brian Hutchinson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dm8168-evm.dts | 25 +++++++++++++++++++++++ arch/arm/boot/dts/dm816x.dtsi | 34 ++++++++++++++++++++++++++++---- 2 files changed, 55 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 857d0289ad4d7c..d3a29c1b841727 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -35,6 +35,18 @@ DM816X_IOPAD(0x0aac, PIN_INPUT | MUX_MODE0) /* SPI_D1 */ >; }; + + usb0_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d00, MUX_MODE0) /* USB0_DRVVBUS */ + >; + }; + + usb1_pins: pinmux_usb0_pins { + pinctrl-single,pins = < + DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB1_DRVVBUS */ + >; + }; }; &i2c1 { @@ -127,3 +139,16 @@ &mmc1 { vmmc-supply = <&vmmcsd_fixed>; }; + +/* At least dm8168-evm rev c won't support multipoint, later may */ +&usb0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + mentor,multipoint = <0>; +}; + +&usb1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + mentor,multipoint = <0>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index d98d0f7de380d9..3c97b5f2addc12 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -97,10 +97,31 @@ /* Device Configuration Registers */ scm_conf: syscon@600 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x600 0x110>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0x600 0x110>; + + usb_phy0: usb-phy@20 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x20 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; + + usb_phy1: usb-phy@28 { + compatible = "ti,dm8168-usb-phy"; + reg = <0x28 0x8>; + reg-names = "phy"; + clocks = <&main_fapll 6>; + clock-names = "refclk"; + #phy-cells = <0>; + syscon = <&scm_conf>; + }; }; scrm_clocks: clocks { @@ -357,7 +378,10 @@ reg-names = "mc", "control"; interrupts = <18>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy0>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; @@ -366,13 +390,15 @@ usb1: usb@47401800 { compatible = "ti,musb-am33xx"; - status = "disabled"; reg = <0x47401c00 0x400 0x47401800 0x200>; reg-names = "mc", "control"; interrupts = <19>; interrupt-names = "mc"; - dr_mode = "otg"; + dr_mode = "host"; + interface-type = <0>; + phys = <&usb_phy1>; + phy-names = "usb2-phy"; mentor,multipoint = <1>; mentor,num-eps = <16>; mentor,ram-bits = <12>; From 1861cda0de66d02688a9b3cba658ff9ab847e26d Mon Sep 17 00:00:00 2001 From: Ivaylo Dimitrov Date: Sun, 8 Feb 2015 17:48:56 +0200 Subject: [PATCH 30/79] ARM: dts: n900: fix i2c bus numbering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With legacy boot i2c buses on Nokia N900 are numbered i2c1, i2c2 and i2c3. Commit 20b80942ef4e ("ARM: dts: OMAP3+: Add i2c aliases") fixed the numbering with DT boot, but introduced a regression on N900 - aliases become i2c0, i2c1 and i2c2. Fix that by providing the correct aliases in the board dts. Signed-off-by: Ivaylo Dimitrov Tested-by: Pali Rohár Acked-by: Nishanth Menon [tony@atomide.com: this is needed for legacy user space to work] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 60403273f83e69..bef131d1aef1d2 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -16,6 +16,13 @@ model = "Nokia N900"; compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3"; + aliases { + i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + cpus { cpu@0 { cpu0-supply = <&vcc>; From cb9071d4bb0d61cc5a375cc9ed5fefed5bb65e09 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Thu, 19 Feb 2015 17:49:50 +0100 Subject: [PATCH 31/79] ARM: dts: n900: Fix offset for smc91x ethernet MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Offset for smc91x must be zero otherwise smc91x linux kernel driver does not detect smc91x ethernet hardware in qemu N900 machine. The 0x300 offset was used to supress a warning the smsc911x driver produces about non-standard offset as 0x300 seems to be the EEPROM default. As only three address lines are connected both 0 and 0x300 will work just fine with 0 being correct. The warning about the non-standard offset can be fixed by writing to EEPROM as that's needed in any case to set the MAC address. Signed-off-by: Pali Rohár [tony@atomide.com: updated comments, just use 0 instead of 0x0] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-n900.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index bef131d1aef1d2..db80f9d376fadf 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -711,7 +711,7 @@ compatible = "smsc,lan91c94"; interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ - reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ + reg = <1 0 0xf>; /* 16 byte IO range */ bank-width = <2>; pinctrl-names = "default"; pinctrl-0 = <ðernet_pins>; From 123604482599631137cfae027d6475a04b854f8c Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 19 Feb 2015 12:03:54 -0600 Subject: [PATCH 32/79] ARM: dts: am437x-idk: fix TPS62362 i2c bus As it turns out, tps62362 is actually on I2C bus0, not bus1. This has gone unnoticed because Linux doesn't use (as of now) that regulator at all, it's setup by the bootloader and left as is. While at that, also add missing reg property for our regulator. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-idk-evm.dts | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index f9a17e2ca8cb06..2471f1ebd4ed59 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -133,20 +133,6 @@ >; }; - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - 0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ - >; - }; - - i2c1_pins_sleep: i2c1_pins_sleep { - pinctrl-single,pins = < - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_cs0.i2c1_scl */ - 0x158 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d1.i2c1_sda */ - >; - }; - mmc1_pins_default: pinmux_mmc1_pins_default { pinctrl-single,pins = < 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */ @@ -262,17 +248,10 @@ pagesize = <64>; reg = <0x50>; }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&i2c1_pins_default>; - pinctrl-1 = <&i2c1_pins_default>; - clock-frequency = <400000>; tps: tps62362@60 { compatible = "ti,tps62362"; + reg = <0x60>; regulator-name = "VDD_MPU"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1330000>; From 57fd4e5d380fcb4d2f1641a7b2ad26632a448282 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 19 Feb 2015 12:03:55 -0600 Subject: [PATCH 33/79] ARM: omap2plus_defconfig: enable TPS62362 regulator This regulator is used on AM437x Industrial Development Kit. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index b7386524c35661..8ff1a988c0f46c 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -248,6 +248,7 @@ CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_PBIAS=y CONFIG_REGULATOR_TI_ABB=y +CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y From ee5d9cd2b31df90aba7812c8c9ce5a70948a28f8 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 19 Feb 2015 13:57:08 -0600 Subject: [PATCH 34/79] ARM: dts: am437x-idk: fix sleep pinctrl state we have i2c0 sleep pinctrl state but were passing default state anyhow. Fix that. Signed-off-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 2471f1ebd4ed59..0198f5a62b96cd 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -240,7 +240,7 @@ status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c0_pins_default>; - pinctrl-1 = <&i2c0_pins_default>; + pinctrl-1 = <&i2c0_pins_sleep>; clock-frequency = <400000>; at24@50 { From caa73a46888f00b12202406f93f36c5c8feaa8fb Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 20 Feb 2015 15:42:02 +0200 Subject: [PATCH 35/79] ARM: dts: omap2: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index 59d1c297bb30f1..578fa2a54dce35 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -87,8 +87,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <64>; + dma-channels = <32>; + dma-requests = <64>; }; i2c1: i2c@48070000 { From 7e8d25d5960badb10ba739a1b8a5f33e2cbd988a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 20 Feb 2015 15:42:03 +0200 Subject: [PATCH 36/79] ARM: dts: omap3: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 01b71111bd5587..f4f78c40b56450 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -155,8 +155,8 @@ <14>, <15>; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <96>; + dma-channels = <32>; + dma-requests = <96>; }; omap3_pmx_core: pinmux@48002030 { From 24ac17704943aaa2fb5e5d4b9dffc911aec41d88 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 20 Feb 2015 15:42:04 +0200 Subject: [PATCH 37/79] ARM: dts: omap4: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 074147cebae49f..87401d9f4d8b02 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -223,8 +223,8 @@ , ; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4a310000 { From 951c1c04c63906d7ba9462741d42a947ea838bf7 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 20 Feb 2015 15:42:05 +0200 Subject: [PATCH 38/79] ARM: dts: omap5: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index bb498e7cc0f1a4..ddff674bd05edd 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -238,8 +238,8 @@ , ; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { From 08d9b327e6289a9fdf6c3fe9830053bb099d820a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 20 Feb 2015 15:42:06 +0200 Subject: [PATCH 39/79] ARM: dts: dra7: Correct the dma controller's property names According to the Documentation/devicetree/bindings/dma/dma.txt the dma-channels and dma-requests property should not have '#'. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 853d37d96007fc..127608d79033e3 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -249,8 +249,8 @@ , ; #dma-cells = <1>; - #dma-channels = <32>; - #dma-requests = <127>; + dma-channels = <32>; + dma-requests = <127>; }; gpio1: gpio@4ae10000 { From f8c360588ccdaa80b8878688653d41417589cdc7 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 23 Feb 2015 17:18:36 +0200 Subject: [PATCH 40/79] ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 8ff1a988c0f46c..c090989b042fe2 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -114,6 +114,7 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_OMAP2=y From acd83a1652dc60cfb5b3e6f061f48b87044c9b20 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 23 Feb 2015 17:18:37 +0200 Subject: [PATCH 41/79] ARM: omap2plus_defconfig: Fix SATA boot SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/configs/omap2plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c090989b042fe2..a097cffa1231f5 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -376,7 +376,7 @@ CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m CONFIG_OMAP_USB2=m -CONFIG_TI_PIPE3=m +CONFIG_TI_PIPE3=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set From addfcde7c485781c9bc076bb7a20faf3e07554ad Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 24 Feb 2015 14:37:07 +0200 Subject: [PATCH 42/79] ARM: dts: dra7x-evm: beagle-x15: Fix USB Host In commit 87517d26d888 ("ARM: dts: dra7-evm: Add extcon nodes for USB") we enabled Extcon USB gpio to tackle the USB ID pin and get peripheral mode to work. But the extcon-gpio-usb driver [1] didn't make it into v4.0 and this makes the USB driver defer probe indefinitely breaking USB Host functionality. As a temporary fix we remove the extcon handle from the USB controller and add it back when the extcon driver merges in v4.1. [1] - https://lkml.org/lkml/2015/2/2/187 Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 8 -------- arch/arm/boot/dts/dra7-evm.dts | 8 -------- arch/arm/boot/dts/dra72-evm.dts | 8 -------- 3 files changed, 24 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 03750af3b49a41..6463f9ef2b5482 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -549,14 +549,6 @@ pinctrl-0 = <&usb1_pins>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb2 { dr_mode = "peripheral"; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 746cddb1b8f538..3290a96ba586a7 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -543,14 +543,6 @@ }; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4d871171361088..e0264d0bf7b971 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -380,14 +380,6 @@ phy-supply = <&ldo4_reg>; }; -&omap_dwc3_1 { - extcon = <&extcon_usb1>; -}; - -&omap_dwc3_2 { - extcon = <&extcon_usb2>; -}; - &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; From 67fd14b3eca63b14429350e9eadc5fab709a8821 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Tue, 24 Feb 2015 10:10:43 -0600 Subject: [PATCH 43/79] ARM: dts: am335x-bone*: usb0 is hardwired for peripheral Fixes: http://bugs.elinux.org/issues/127 the bb.org community was seeing random reboots before this change. Signed-off-by: Robert Nelson Reviewed-by: Felipe Balbi Acked-by: Felipe Balbi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 6cc25ed912eeff..2c6248d9a9efcd 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -195,6 +195,7 @@ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; &usb1 { From 62e537f8d568347bbe4e00d7803a838750cdc618 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Tue, 24 Feb 2015 13:37:54 -0800 Subject: [PATCH 44/79] drm/i915: Fix frontbuffer false positve. This return 0 without setting atomic bits on fb == crtc->cursor->fb where causing frontbuffer false positives. According to Daniel: The original regression seems to have been introduced in the original check/commit split: commit 757f9a3e5b8a812af0c213099a5b31cb423f4d3c Author: Gustavo Padovan Date: Wed Sep 24 14:20:24 2014 -0300 drm/i915: move check of intel_crtc_cursor_set_obj() out Which already cause other trouble, resulting in the check getting moved in commit e391ea882b1a04fb3f559287ac694652a3cd9da9 Author: Gustavo Padovan Date: Wed Sep 24 14:20:25 2014 -0300 drm/i915: Fix not checking cursor and object sizes The frontbuffer tracking itself only was broken when we shifted it into the check/commit logic with: commit 32b7eeec4d1e861230b09d437e95d76c86ff4a68 Author: Matt Roper Date: Wed Dec 24 07:59:06 2014 -0800 drm/i915: Refactor work that can sleep out of commit (v7) v2: When putting more debug prints I notice the solution was simpler than I thought. AMS design is solid, just this return was wrong. Sorry for the noise. v3: Remove the entire chunck that would probably be removed by gcc anyway. (by Daniel) Cc: Jani Nikula Cc: Gustavo Padovan Cc: Matt Roper Signed-off-by: Rodrigo Vivi Reviewed-by: Matt Roper Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bf19a5cce4a8ba..3117679299a65a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -12197,9 +12197,6 @@ intel_check_cursor_plane(struct drm_plane *plane, return -ENOMEM; } - if (fb == crtc->cursor->fb) - return 0; - /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); if (!INTEL_INFO(dev)->cursor_needs_physical && obj->tiling_mode) { From 7934d69abfa98392433c03136025b71972851733 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 21 Jan 2015 12:02:30 +0000 Subject: [PATCH 45/79] arm64: Add L2 cache topology to ARM Ltd boards/models Commit 5d425c18653731af6 ("arm64: kernel: add support for cpu cache information") adds cacheinfo support for ARM64. Since there's no architectural way of detecting the cpus that share particular cache, device tree can be used and the core cacheinfo already supports the same. This patch adds the L2 cache topology on Juno board, FVP/RTSM and foundation models. Signed-off-by: Sudeep Holla Cc: Mark Rutland Cc: Liviu Dudau Cc: Lorenzo Pieralisi Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/foundation-v8.dts | 8 ++++++++ arch/arm64/boot/dts/arm/juno.dts | 14 ++++++++++++++ arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts | 8 ++++++++ 3 files changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts index 27f32962e55c60..4eac8dcea423e2 100644 --- a/arch/arm64/boot/dts/arm/foundation-v8.dts +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -34,6 +34,7 @@ reg = <0x0 0x0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; @@ -41,6 +42,7 @@ reg = <0x0 0x1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@2 { device_type = "cpu"; @@ -48,6 +50,7 @@ reg = <0x0 0x2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@3 { device_type = "cpu"; @@ -55,6 +58,11 @@ reg = <0x0 0x3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; }; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index d429129ecb3d03..133ee59de2d706 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -39,6 +39,7 @@ reg = <0x0 0x0>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A57_L2>; }; A57_1: cpu@1 { @@ -46,6 +47,7 @@ reg = <0x0 0x1>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A57_L2>; }; A53_0: cpu@100 { @@ -53,6 +55,7 @@ reg = <0x0 0x100>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_1: cpu@101 { @@ -60,6 +63,7 @@ reg = <0x0 0x101>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_2: cpu@102 { @@ -67,6 +71,7 @@ reg = <0x0 0x102>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; }; A53_3: cpu@103 { @@ -74,6 +79,15 @@ reg = <0x0 0x103>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index efc59b3baf63fb..20addabbd127c8 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -37,6 +37,7 @@ reg = <0x0 0x0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@1 { device_type = "cpu"; @@ -44,6 +45,7 @@ reg = <0x0 0x1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@2 { device_type = "cpu"; @@ -51,6 +53,7 @@ reg = <0x0 0x2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; }; cpu@3 { device_type = "cpu"; @@ -58,6 +61,11 @@ reg = <0x0 0x3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; }; }; From 7a26f9ad1b5badfd0200ce2262ad696e2a6b7fbb Mon Sep 17 00:00:00 2001 From: "Nathan-J. Hirschauer" Date: Wed, 18 Feb 2015 02:01:19 +0100 Subject: [PATCH 46/79] drm/radeon: enable native backlight control on old macs Commit b7bc596ebbe0 ("drm/radeon: disable native backlight control on pre-r6xx asics (v2)") accidently broke backlight control on old mac laptops that use the on-GPU backlight controller. Signed-off-by: Nathan-J. Hirschauer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_encoders.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6b670b0bc47bb9..3a297037cc1762 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -179,9 +179,12 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder, (rdev->pdev->subsystem_vendor == 0x1734) && (rdev->pdev->subsystem_device == 0x1107)) use_bl = false; +/* Older PPC macs use on-GPU backlight controller */ +#ifndef CONFIG_PPC_PMAC /* disable native backlight control on older asics */ else if (rdev->family < CHIP_R600) use_bl = false; +#endif else use_bl = true; } From 3d2d98ee1af0cf6eebfbd6bff4c17d3601ac1284 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 18 Feb 2015 01:05:30 -0500 Subject: [PATCH 47/79] drm/radeon: use drm_mode_vrefresh() rather than mode->vrefresh Just in case it hasn't been calculated for the mode. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/r600_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r600_dpm.c b/drivers/gpu/drm/radeon/r600_dpm.c index 843b65f46ece16..fa2154493cf153 100644 --- a/drivers/gpu/drm/radeon/r600_dpm.c +++ b/drivers/gpu/drm/radeon/r600_dpm.c @@ -188,7 +188,7 @@ u32 r600_dpm_get_vrefresh(struct radeon_device *rdev) list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { radeon_crtc = to_radeon_crtc(crtc); if (crtc->enabled && radeon_crtc->enabled && radeon_crtc->hw_mode.clock) { - vrefresh = radeon_crtc->hw_mode.vrefresh; + vrefresh = drm_mode_vrefresh(&radeon_crtc->hw_mode); break; } } From 951caa6acf7121f88a9e8e04ef75bd0ac323a033 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 18 Feb 2015 00:59:45 -0500 Subject: [PATCH 48/79] drm/radeon: disable mclk switching with 120hz+ monitors These tend to be problematic even if the vblank period is long enough. This needs more investigation across a wider range of displays. Disable for now. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=87796 https://bugs.freedesktop.org/show_bug.cgi?id=89198 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_pm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 9f758d39420dd4..33cf4108386dbb 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -852,6 +852,12 @@ static struct radeon_ps *radeon_dpm_pick_power_state(struct radeon_device *rdev, single_display = false; } + /* 120hz tends to be problematic even if they are under the + * vblank limit. + */ + if (single_display && (r600_dpm_get_vrefresh(rdev) >= 120)) + single_display = false; + /* certain older asics have a separare 3D performance state, * so try that first if the user selected performance */ From e1b4e722f7b401bdf90f2ac397b89c20d096eb04 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 18 Feb 2015 10:15:10 -0500 Subject: [PATCH 49/79] drm/radeon: dump full IB if we hit a packet error Dump the whole IB if we run into an invalid packet. This makes things much easier to debug. bug: https://bugs.freedesktop.org/show_bug.cgi?id=89148 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_cs.c | 16 ++++++++++++++-- drivers/gpu/drm/radeon/si.c | 15 ++++++++------- 2 files changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index c830863bc98aa0..a579ed379f20f4 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -715,6 +715,7 @@ int radeon_cs_packet_parse(struct radeon_cs_parser *p, struct radeon_cs_chunk *ib_chunk = p->chunk_ib; struct radeon_device *rdev = p->rdev; uint32_t header; + int ret = 0, i; if (idx >= ib_chunk->length_dw) { DRM_ERROR("Can not parse packet at %d after CS end %d !\n", @@ -743,14 +744,25 @@ int radeon_cs_packet_parse(struct radeon_cs_parser *p, break; default: DRM_ERROR("Unknown packet type %d at %d !\n", pkt->type, idx); - return -EINVAL; + ret = -EINVAL; + goto dump_ib; } if ((pkt->count + 1 + pkt->idx) >= ib_chunk->length_dw) { DRM_ERROR("Packet (%d:%d:%d) end after CS buffer (%d) !\n", pkt->idx, pkt->type, pkt->count, ib_chunk->length_dw); - return -EINVAL; + ret = -EINVAL; + goto dump_ib; } return 0; + +dump_ib: + for (i = 0; i < ib_chunk->length_dw; i++) { + if (i == idx) + printk("\t0x%08x <---\n", radeon_get_ib_value(p, i)); + else + printk("\t0x%08x\n", radeon_get_ib_value(p, i)); + } + return ret; } /** diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 73107fe9e46f7d..ad26973733af0b 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -4699,12 +4699,6 @@ int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib) switch (pkt.type) { case RADEON_PACKET_TYPE0: dev_err(rdev->dev, "Packet0 not allowed!\n"); - for (i = 0; i < ib->length_dw; i++) { - if (i == idx) - printk("\t0x%08x <---\n", ib->ptr[i]); - else - printk("\t0x%08x\n", ib->ptr[i]); - } ret = -EINVAL; break; case RADEON_PACKET_TYPE2: @@ -4736,8 +4730,15 @@ int si_ib_parse(struct radeon_device *rdev, struct radeon_ib *ib) ret = -EINVAL; break; } - if (ret) + if (ret) { + for (i = 0; i < ib->length_dw; i++) { + if (i == idx) + printk("\t0x%08x <---\n", ib->ptr[i]); + else + printk("\t0x%08x\n", ib->ptr[i]); + } break; + } } while (idx < ib->length_dw); return ret; From dc12a3ec712de225da48b35bd602e60397f25f2d Mon Sep 17 00:00:00 2001 From: Leo Liu Date: Wed, 18 Feb 2015 13:19:26 +0100 Subject: [PATCH 50/79] drm/radeon: enable SRBM timeout interrupt on CIK v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v2: disable it on suspend Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 8 ++++++++ drivers/gpu/drm/radeon/cikd.h | 4 ++++ 2 files changed, 12 insertions(+) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index e6a4ba236c703d..0c993da9c8fb05 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -3613,6 +3613,8 @@ static void cik_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); WREG32(BIF_FB_EN, FB_READ_EN | FB_WRITE_EN); @@ -7230,6 +7232,8 @@ static void cik_disable_interrupt_state(struct radeon_device *rdev) WREG32(CP_ME2_PIPE3_INT_CNTL, 0); /* grbm */ WREG32(GRBM_INT_CNTL, 0); + /* SRBM */ + WREG32(SRBM_INT_CNTL, 0); /* vline/vblank, etc. */ WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(LB_INTERRUPT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); @@ -8046,6 +8050,10 @@ int cik_irq_process(struct radeon_device *rdev) break; } break; + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h index 03003f8a6de63b..c648e1996dabac 100644 --- a/drivers/gpu/drm/radeon/cikd.h +++ b/drivers/gpu/drm/radeon/cikd.h @@ -482,6 +482,10 @@ #define SOFT_RESET_ORB (1 << 23) #define SOFT_RESET_VCE (1 << 24) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define VM_L2_CNTL 0x1400 #define ENABLE_L2_CACHE (1 << 0) #define ENABLE_L2_FRAGMENT_PROCESSING (1 << 1) From 18ad01effefe9c16454f2dfe045a9b5252d08d7a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 18 Feb 2015 13:19:27 +0100 Subject: [PATCH 51/79] drm/radeon: enable SRBM timeout interrupt on SI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si.c | 7 +++++++ drivers/gpu/drm/radeon/sid.h | 4 ++++ 2 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index ad26973733af0b..bcf516a8a2f196 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3162,6 +3162,8 @@ static void si_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 1); + WREG32(SRBM_INT_ACK, 1); evergreen_fix_pci_max_read_req_size(rdev); @@ -5911,6 +5913,7 @@ static void si_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL + DMA1_REGISTER_OFFSET) & ~TRAP_ENABLE; WREG32(DMA_CNTL + DMA1_REGISTER_OFFSET, tmp); WREG32(GRBM_INT_CNTL, 0); + WREG32(SRBM_INT_CNTL, 0); if (rdev->num_crtc >= 2) { WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); @@ -6610,6 +6613,10 @@ int si_irq_process(struct radeon_device *rdev) break; } break; + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index cbd91d226f3ce2..c27118cab16a62 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -358,6 +358,10 @@ #define CC_SYS_RB_BACKEND_DISABLE 0xe80 #define GC_USER_SYS_RB_BACKEND_DISABLE 0xe84 +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define SRBM_STATUS2 0x0EC4 #define DMA_BUSY (1 << 5) #define DMA1_BUSY (1 << 6) From acc1522a54a3ff4dc250b6e94c55c53c5240e234 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Wed, 18 Feb 2015 13:19:28 +0100 Subject: [PATCH 52/79] drm/radeon: enable SRBM timeout interrupt on EG/NI MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen.c | 7 +++++++ drivers/gpu/drm/radeon/evergreend.h | 4 ++++ drivers/gpu/drm/radeon/ni.c | 2 ++ drivers/gpu/drm/radeon/nid.h | 4 ++++ 4 files changed, 17 insertions(+) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 78600f534c804b..4c0e24b3bb9022 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3253,6 +3253,8 @@ static void evergreen_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); evergreen_fix_pci_max_read_req_size(rdev); @@ -4324,6 +4326,7 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) tmp = RREG32(DMA_CNTL) & ~TRAP_ENABLE; WREG32(DMA_CNTL, tmp); WREG32(GRBM_INT_CNTL, 0); + WREG32(SRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); if (rdev->num_crtc >= 4) { @@ -5066,6 +5069,10 @@ int evergreen_irq_process(struct radeon_device *rdev) DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + case 96: + DRM_ERROR("SRBM_READ_ERROR: 0x%x\n", RREG32(SRBM_READ_ERROR)); + WREG32(SRBM_INT_ACK, 0x1); + break; case 124: /* UVD */ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data); radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX); diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index ee83d2a88750aa..a8d1d5240fcb30 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1191,6 +1191,10 @@ #define SOFT_RESET_REGBB (1 << 22) #define SOFT_RESET_ORB (1 << 23) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + /* display watermarks */ #define DC_LB_MEMORY_SPLIT 0x6b0c #define PRIORITY_A_CNT 0x6b18 diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 24242a7f0ac3d7..ebe68dd8e06a9e 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -962,6 +962,8 @@ static void cayman_gpu_init(struct radeon_device *rdev) } WREG32(GRBM_CNTL, GRBM_READ_TIMEOUT(0xff)); + WREG32(SRBM_INT_CNTL, 0x1); + WREG32(SRBM_INT_ACK, 0x1); evergreen_fix_pci_max_read_req_size(rdev); diff --git a/drivers/gpu/drm/radeon/nid.h b/drivers/gpu/drm/radeon/nid.h index ad7125486894d1..6b44580440d09a 100644 --- a/drivers/gpu/drm/radeon/nid.h +++ b/drivers/gpu/drm/radeon/nid.h @@ -82,6 +82,10 @@ #define SOFT_RESET_REGBB (1 << 22) #define SOFT_RESET_ORB (1 << 23) +#define SRBM_READ_ERROR 0xE98 +#define SRBM_INT_CNTL 0xEA0 +#define SRBM_INT_ACK 0xEA8 + #define SRBM_STATUS2 0x0EC4 #define DMA_BUSY (1 << 5) #define DMA1_BUSY (1 << 6) From dbfb00c3e7e18439f2ebf67fe99bf7a50b5bae1e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Feb 2015 16:02:15 -0500 Subject: [PATCH 53/79] drm/radeon: fix 1 RB harvest config setup for TN/RL The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index ebe68dd8e06a9e..dab00812abaabe 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1088,12 +1088,12 @@ static void cayman_gpu_init(struct radeon_device *rdev) if ((rdev->config.cayman.max_backends_per_se == 1) && (rdev->flags & RADEON_IS_IGP)) { - if ((disabled_rb_mask & 3) == 1) { - /* RB0 disabled, RB1 enabled */ - tmp = 0x11111111; - } else { + if ((disabled_rb_mask & 3) == 2) { /* RB1 disabled, RB0 enabled */ tmp = 0x00000000; + } else { + /* RB0 disabled, RB1 enabled */ + tmp = 0x11111111; } } else { tmp = gb_addr_config & NUM_PIPES_MASK; From 94a47c49fe5dc0c4d1e56bc1286623df3ea53b23 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 20 Feb 2015 11:51:38 -0500 Subject: [PATCH 54/79] drm/radeon: fix atom aux payload size check for writes (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The atom aux param interface only supports 4 bits for the total write transfer size (header + payload). This limits us to 12 bytes of payload rather than 16. Add a check for this. Reads are not affected. v2: switch to WARN_ON_ONCE Reviewed-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_dp.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c index 5bf825dfaa098e..8d74de82456e88 100644 --- a/drivers/gpu/drm/radeon/atombios_dp.c +++ b/drivers/gpu/drm/radeon/atombios_dp.c @@ -178,6 +178,13 @@ radeon_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) switch (msg->request & ~DP_AUX_I2C_MOT) { case DP_AUX_NATIVE_WRITE: case DP_AUX_I2C_WRITE: + /* The atom implementation only supports writes with a max payload of + * 12 bytes since it uses 4 bits for the total count (header + payload) + * in the parameter space. The atom interface supports 16 byte + * payloads for reads. The hw itself supports up to 16 bytes of payload. + */ + if (WARN_ON_ONCE(msg->size > 12)) + return -E2BIG; /* tx_size needs to be 4 even for bare address packets since the atom * table needs the info in tx_buf[3]. */ From 3473f542ab707afbb6e6057ddb6f3b40ef22e093 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 23 Feb 2015 17:45:54 -0500 Subject: [PATCH 55/79] drm/radeon: only enable DP audio if the monitor supports it We were enabling DP secondary streams even if the monitor didn't support them. Fixes display problems on some DP monitors. Tested-by: Jim Boz Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/atombios_encoders.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_encoders.c b/drivers/gpu/drm/radeon/atombios_encoders.c index 7c9df1eac06594..7fe7b749e18254 100644 --- a/drivers/gpu/drm/radeon/atombios_encoders.c +++ b/drivers/gpu/drm/radeon/atombios_encoders.c @@ -731,7 +731,9 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) dig_connector = radeon_connector->con_priv; if ((dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) || (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_eDP)) { - if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) + if (radeon_audio != 0 && + drm_detect_monitor_audio(radeon_connector_edid(connector)) && + ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) return ATOM_ENCODER_MODE_DP_AUDIO; return ATOM_ENCODER_MODE_DP; } else if (radeon_audio != 0) { @@ -747,7 +749,9 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) } break; case DRM_MODE_CONNECTOR_eDP: - if (radeon_audio != 0 && ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) + if (radeon_audio != 0 && + drm_detect_monitor_audio(radeon_connector_edid(connector)) && + ASIC_IS_DCE4(rdev) && !ASIC_IS_DCE5(rdev)) return ATOM_ENCODER_MODE_DP_AUDIO; return ATOM_ENCODER_MODE_DP; case DRM_MODE_CONNECTOR_DVIA: @@ -1720,8 +1724,10 @@ radeon_atom_encoder_dpms_dig(struct drm_encoder *encoder, int mode) } encoder_mode = atombios_get_encoder_mode(encoder); - if (radeon_audio != 0 && - (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode))) + if (connector && (radeon_audio != 0) && + ((encoder_mode == ATOM_ENCODER_MODE_HDMI) || + (ENCODER_MODE_IS_DP(encoder_mode) && + drm_detect_monitor_audio(radeon_connector_edid(connector))))) radeon_audio_dpms(encoder, mode); } @@ -2136,6 +2142,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); int encoder_mode; radeon_encoder->pixel_clock = adjusted_mode->clock; @@ -2164,8 +2171,10 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA: /* handled in dpms */ encoder_mode = atombios_get_encoder_mode(encoder); - if (radeon_audio != 0 && - (encoder_mode == ATOM_ENCODER_MODE_HDMI || ENCODER_MODE_IS_DP(encoder_mode))) + if (connector && (radeon_audio != 0) && + ((encoder_mode == ATOM_ENCODER_MODE_HDMI) || + (ENCODER_MODE_IS_DP(encoder_mode) && + drm_detect_monitor_audio(radeon_connector_edid(connector))))) radeon_audio_mode_set(encoder, adjusted_mode); break; case ENCODER_OBJECT_ID_INTERNAL_DDI: From 0bb59cb00e002d17bb337410a45c62023ee78fc9 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 25 Feb 2015 18:44:51 +0100 Subject: [PATCH 56/79] drm: atmel-hlcdc: remove clock polarity from crtc driver Remove this configuration bit in crtc driver as the rising edge clock is widely used. Signed-off-by: Boris Brezillon Signed-off-by: Nicolas Ferre --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index 0409b907de5d5c..b3e3068c6ec07f 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -153,7 +153,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *c, (adj->crtc_hdisplay - 1) | ((adj->crtc_vdisplay - 1) << 16)); - cfg = ATMEL_HLCDC_CLKPOL; + cfg = 0; prate = clk_get_rate(crtc->dc->hlcdc->sys_clk); mode_rate = mode->crtc_clock * 1000; From 4a3a6f86693922b29cf829c63f652b057f14619e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 24 Feb 2015 15:14:45 +0100 Subject: [PATCH 57/79] ARM: multi_v7_defconfig: Enable shmobile platforms Enable support for shmobile platforms that became multi-platform aware. Several non-critical drivers and subsystems are built as modules, to keep kernel size reasonable. Tested on: - r8a73a4/ape6evm: - U-Boot fails with "Error: unrecognized/unsupported machine ID", - kexec works. - r8a7740/armadillo: - Hermit boot loader fails (larger image, more memory corruption), - kexec works. - r8a7791/koelsch, - sh73a0/kzm9g: - zImage+DTB from U-Boot needs CONFIG_ARM_ATAG_DTB_COMPAT=n, - kexec works. - am335x/boneblack. Signed-off-by: Geert Uytterhoeven Acked-by: Simon Horman Signed-off-by: Arnd Bergmann --- arch/arm/configs/multi_v7_defconfig | 82 +++++++++++++++++++++++++++-- 1 file changed, 77 insertions(+), 5 deletions(-) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e8a4c955241b88..b7e6b6fba5e0f0 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -62,6 +62,17 @@ CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y CONFIG_ARCH_EXYNOS=y CONFIG_EXYNOS5420_MCPM=y +CONFIG_ARCH_SHMOBILE_MULTI=y +CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A73A4=y +CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7779=y +CONFIG_ARCH_R8A7790=y +CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7794=y +CONFIG_ARCH_SH73A0=y +CONFIG_MACH_MARZEN=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -84,6 +95,8 @@ CONFIG_PCI_KEYSTONE=y CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y +CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_PCIEPORTBUS=y CONFIG_SMP=y CONFIG_NR_CPUS=8 @@ -130,6 +143,7 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_OMAP_OCP2SCP=y +CONFIG_SIMPLE_PM_BUS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -157,6 +171,7 @@ CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y +CONFIG_SATA_RCAR=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y @@ -167,14 +182,17 @@ CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y CONFIG_R8169=y +CONFIG_SH_ETH=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y CONFIG_MARVELL_PHY=y +CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y @@ -192,15 +210,18 @@ CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_INPUT_AXP20X_PEK=y +CONFIG_INPUT_ADXL34X=m CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y @@ -213,6 +234,9 @@ CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=20 +CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_VT8500=y @@ -233,19 +257,26 @@ CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_RIIC=y CONFIG_I2C_S3C2410=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_SIRF=y -CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y -CONFIG_SPI=y +CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y -CONFIG_SPI_DAVINCI=y +CONFIG_I2C_RCAR=y +CONFIG_SPI=y CONFIG_SPI_CADENCE=y +CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y +CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=m +CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y @@ -259,12 +290,15 @@ CONFIG_PINCTRL_PALMAS=y CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_GPIO_DWAPB=y CONFIG_GPIO_DAVINCI=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_EM=y +CONFIG_GPIO_RCAR=y CONFIG_GPIO_XILINX=y CONFIG_GPIO_ZYNQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_PCF857X=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_SYSCON=y @@ -276,10 +310,12 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_KEYSTONE=y CONFIG_POWER_RESET_SUN6I=y +CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_DAVINCI_WATCHDOG CONFIG_ST_THERMAL_SYSCFG=y @@ -290,6 +326,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y +CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y @@ -304,13 +341,16 @@ CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_REGULATOR_AB8500=y +CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_BCM590XX=y +CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y @@ -324,18 +364,32 @@ CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_GSPCA=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=m +CONFIG_SOC_CAMERA_PLATFORM=m +CONFIG_VIDEO_RCAR_VIN=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=m +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_VIDEO_ADV7180=m CONFIG_DRM=y +CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y +CONFIG_FB_SH_MOBILE_LCDC=y CONFIG_FB_SIMPLE=y +CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y +CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_SOUND=y @@ -343,6 +397,8 @@ CONFIG_SND=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=y +CONFIG_SND_SOC_SH4_FSI=m +CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_RT5640=y CONFIG_SND_SOC_TEGRA_WM8753=y @@ -350,6 +406,8 @@ CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_MVEBU=y @@ -362,6 +420,8 @@ CONFIG_USB_ISP1760_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_R8A66597_HCD=m +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_CHIPIDEA=y @@ -374,6 +434,10 @@ CONFIG_SAMSUNG_USB3PHY=y CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y +CONFIG_USB_RCAR_PHY=m +CONFIG_USB_RCAR_GEN2_PHY=m +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y @@ -392,12 +456,14 @@ CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y -CONFIG_MMC_SUNXI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_PLTFM=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SH_MMCIF=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y @@ -421,10 +487,12 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y +CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y @@ -436,6 +504,9 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y +CONFIG_SH_DMAE=y +CONFIG_RCAR_AUDMAC_PP=m +CONFIG_RCAR_DMAC=y CONFIG_STE_DMA40=y CONFIG_SIRF_DMA=y CONFIG_TI_EDMA=y @@ -468,6 +539,7 @@ CONFIG_IIO=y CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y From e1b6b6ce55a0a25c8aa8af019095253b2133a41a Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Tue, 24 Feb 2015 17:21:07 -0600 Subject: [PATCH 58/79] arm64: vdso: minor ABI fix for clock_getres The vdso implementation of clock_getres currently returns 0 (success) whenever a null timespec is provided by the caller, regardless of the clock id supplied. This behavior is incorrect. It should fall back to syscall when an unrecognized clock id is passed, even when the timespec argument is null. This ensures that clock_getres always returns an error for invalid clock ids. Signed-off-by: Nathan Lynch Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/vdso/gettimeofday.S | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/kernel/vdso/gettimeofday.S b/arch/arm64/kernel/vdso/gettimeofday.S index fe652ffd34c280..efa79e8d4196d0 100644 --- a/arch/arm64/kernel/vdso/gettimeofday.S +++ b/arch/arm64/kernel/vdso/gettimeofday.S @@ -174,8 +174,6 @@ ENDPROC(__kernel_clock_gettime) /* int __kernel_clock_getres(clockid_t clock_id, struct timespec *res); */ ENTRY(__kernel_clock_getres) .cfi_startproc - cbz w1, 3f - cmp w0, #CLOCK_REALTIME ccmp w0, #CLOCK_MONOTONIC, #0x4, ne b.ne 1f @@ -188,6 +186,7 @@ ENTRY(__kernel_clock_getres) b.ne 4f ldr x2, 6f 2: + cbz w1, 3f stp xzr, x2, [x1] 3: /* res == NULL. */ From f5e0a12ca2d939e47995f73428d9bf1ad372b289 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 25 Feb 2015 12:10:35 +0000 Subject: [PATCH 59/79] arm64: psci: move psci firmware calls out of line An arm64 allmodconfig fails to build with GCC 5 due to __asmeq assertions in the PSCI firmware calling code firing due to mcount preambles breaking our assumptions about register allocation of function arguments: /tmp/ccDqJsJ6.s: Assembler messages: /tmp/ccDqJsJ6.s:60: Error: .err encountered /tmp/ccDqJsJ6.s:61: Error: .err encountered /tmp/ccDqJsJ6.s:62: Error: .err encountered /tmp/ccDqJsJ6.s:99: Error: .err encountered /tmp/ccDqJsJ6.s:100: Error: .err encountered /tmp/ccDqJsJ6.s:101: Error: .err encountered This patch fixes the issue by moving the PSCI calls out-of-line into their own assembly files, which are safe from the compiler's meddling fingers. Reported-by: Andy Whitcroft Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/kernel/Makefile | 5 +++-- arch/arm64/kernel/psci-call.S | 28 ++++++++++++++++++++++++++ arch/arm64/kernel/psci.c | 37 +++-------------------------------- 3 files changed, 34 insertions(+), 36 deletions(-) create mode 100644 arch/arm64/kernel/psci-call.S diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index bef04afd603190..5ee07eee80c2b0 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -15,8 +15,9 @@ CFLAGS_REMOVE_return_address.o = -pg arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ sys.o stacktrace.o time.o traps.o io.o vdso.o \ - hyp-stub.o psci.o cpu_ops.o insn.o return_address.o \ - cpuinfo.o cpu_errata.o alternative.o cacheinfo.o + hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \ + return_address.o cpuinfo.o cpu_errata.o \ + alternative.o cacheinfo.o arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \ sys_compat.o entry32.o \ diff --git a/arch/arm64/kernel/psci-call.S b/arch/arm64/kernel/psci-call.S new file mode 100644 index 00000000000000..cf83e61cd3b594 --- /dev/null +++ b/arch/arm64/kernel/psci-call.S @@ -0,0 +1,28 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2015 ARM Limited + * + * Author: Will Deacon + */ + +#include + +/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */ +ENTRY(__invoke_psci_fn_hvc) + hvc #0 + ret +ENDPROC(__invoke_psci_fn_hvc) + +/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */ +ENTRY(__invoke_psci_fn_smc) + smc #0 + ret +ENDPROC(__invoke_psci_fn_smc) diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 3425f311c49ed9..9b8a70ae64a187 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -57,6 +57,9 @@ static struct psci_operations psci_ops; static int (*invoke_psci_fn)(u64, u64, u64, u64); typedef int (*psci_initcall_t)(const struct device_node *); +asmlinkage int __invoke_psci_fn_hvc(u64, u64, u64, u64); +asmlinkage int __invoke_psci_fn_smc(u64, u64, u64, u64); + enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, @@ -109,40 +112,6 @@ static void psci_power_state_unpack(u32 power_state, PSCI_0_2_POWER_STATE_AFFL_SHIFT; } -/* - * The following two functions are invoked via the invoke_psci_fn pointer - * and will not be inlined, allowing us to piggyback on the AAPCS. - */ -static noinline int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, - u64 arg2) -{ - asm volatile( - __asmeq("%0", "x0") - __asmeq("%1", "x1") - __asmeq("%2", "x2") - __asmeq("%3", "x3") - "hvc #0\n" - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - -static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, - u64 arg2) -{ - asm volatile( - __asmeq("%0", "x0") - __asmeq("%1", "x1") - __asmeq("%2", "x2") - __asmeq("%3", "x3") - "smc #0\n" - : "+r" (function_id) - : "r" (arg0), "r" (arg1), "r" (arg2)); - - return function_id; -} - static int psci_get_version(void) { int err; From 06ff87bae8d30ab9c949ae8729355323e18107b4 Mon Sep 17 00:00:00 2001 From: Yingjoe Chen Date: Wed, 25 Feb 2015 10:47:45 +0800 Subject: [PATCH 60/79] arm64: mm: remove unused functions and variable protoypes The functions __cpu_flush_user_tlb_range and __cpu_flush_kern_tlb_range were removed in commit fa48e6f780 'arm64: mm: Optimise tlb flush logic where we have >4K granule'. Global variable cpu_tlb was never used in arm64. Remove them. Signed-off-by: Yingjoe Chen Acked-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/tlbflush.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index 73f0ce570fb31c..4abe9b945f7772 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -24,11 +24,6 @@ #include #include -extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *); -extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long); - -extern struct cpu_tlb_fns cpu_tlb; - /* * TLB Management * ============== From 6910fa16dbe142f6a0fd0fd7c249f9883ff7fc8a Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Tue, 24 Feb 2015 15:40:21 -0800 Subject: [PATCH 61/79] arm64: enable PTE type bit in the mask for pte_modify Caught during Trinity testing. The pte_modify does not allow modification for PTE type bit. This cause the test to hang the system. It is found that the PTE can't transit from an inaccessible page (b00) to a valid page (b11) because the mask does not allow it. This happens when a big block of mmaped memory is set the PROT_NONE, then the a small piece is broken off and set to PROT_WRITE | PROT_READ cause a huge page split. Signed-off-by: Feng Kan Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 16449c535e50fd..800ec0e87ed955 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -460,7 +460,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr) static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY | - PTE_PROT_NONE | PTE_VALID | PTE_WRITE; + PTE_PROT_NONE | PTE_WRITE | PTE_TYPE_MASK; pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask); return pte; } From 0eee0fbd41c7b57d01136df2519c92ec1506e333 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Thu, 19 Feb 2015 17:25:16 +0000 Subject: [PATCH 62/79] arm64: crypto: increase AES interleave to 4x This patch increases the interleave factor for parallel AES modes to 4x. This improves performance on Cortex-A57 by ~35%. This is due to the 3-cycle latency of AES instructions on the A57's relatively deep pipeline (compared to Cortex-A53 where the AES instruction latency is only 2 cycles). At the same time, disable inline expansion of the core AES functions, as the performance benefit of this feature is negligible. Measured on AMD Seattle (using tcrypt.ko mode=500 sec=1): Baseline (2x interleave, inline expansion) ------------------------------------------ testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 95545 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 68496 operations in 1 seconds This patch (4x interleave, no inline expansion) ----------------------------------------------- testing speed of async cbc(aes) (cbc-aes-ce) decryption test 4 (128 bit key, 8192 byte blocks): 124735 operations in 1 seconds test 14 (256 bit key, 8192 byte blocks): 92328 operations in 1 seconds Signed-off-by: Ard Biesheuvel Signed-off-by: Catalin Marinas --- arch/arm64/crypto/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/crypto/Makefile b/arch/arm64/crypto/Makefile index 5720608c50b1b7..abb79b3cfcfea1 100644 --- a/arch/arm64/crypto/Makefile +++ b/arch/arm64/crypto/Makefile @@ -29,7 +29,7 @@ aes-ce-blk-y := aes-glue-ce.o aes-ce.o obj-$(CONFIG_CRYPTO_AES_ARM64_NEON_BLK) += aes-neon-blk.o aes-neon-blk-y := aes-glue-neon.o aes-neon.o -AFLAGS_aes-ce.o := -DINTERLEAVE=2 -DINTERLEAVE_INLINE +AFLAGS_aes-ce.o := -DINTERLEAVE=4 AFLAGS_aes-neon.o := -DINTERLEAVE=4 CFLAGS_aes-glue-ce.o := -DUSE_V8_CRYPTO_EXTENSIONS From f6242cac10427c546271050b31c891a078e490cd Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 24 Feb 2015 16:30:21 +0000 Subject: [PATCH 63/79] arm64: Fix text patching logic when using fixmap Patch 2f896d586610 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [] __copy_to_user+0x2c/0x60 [ 32.032837] [] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [] ftrace_modify_code+0x58/0x84 [ 32.033363] [] ftrace_make_nop+0x3c/0x58 [ 32.033532] [] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [] ftrace_module_init+0x28/0x34 [ 32.033882] [] load_module+0xbb8/0xfc4 [ 32.034044] [] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: Richard W.M. Jones Reviewed-by: Kees Cook Acked-by: Mark Rutland Acked-by: Laura Abbott Tested-by: Richard W.M. Jones Cc: Will Deacon Signed-off-by: Marc Zyngier Signed-off-by: Catalin Marinas --- arch/arm64/kernel/insn.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 27d4864577e5d4..c8eca88f12e6b2 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -87,8 +87,10 @@ static void __kprobes *patch_map(void *addr, int fixmap) if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX)) page = vmalloc_to_page(addr); - else + else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA)) page = virt_to_page(addr); + else + return addr; BUG_ON(!page); set_fixmap(fixmap, page_to_phys(page)); From a1e50a82256ed2f1312e70c52a84323e2e378f49 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 5 Feb 2015 18:01:53 +0000 Subject: [PATCH 64/79] arm64: Increase the swiotlb buffer size 64MB With commit 3690951fc6d4 (arm64: Use swiotlb late initialisation), the swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are platforms with 32-bit only devices that require bounce buffering via swiotlb. This patch changes the swiotlb initialisation to an early 64MB memblock allocation. In order to get the swiotlb buffer correctly allocated (via memblock_virt_alloc_low_nopanic), this patch also defines ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit DMA. Reported-by: Kefeng Wang Tested-by: Kefeng Wang Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/processor.h | 3 ++- arch/arm64/mm/dma-mapping.c | 16 +++------------- arch/arm64/mm/init.c | 14 +++++++++----- 3 files changed, 14 insertions(+), 19 deletions(-) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index f9be30ea1cbd8b..20e9591a60cff9 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -45,7 +45,8 @@ #define STACK_TOP STACK_TOP_MAX #endif /* CONFIG_COMPAT */ -#define ARCH_LOW_ADDRESS_LIMIT PHYS_MASK +extern phys_addr_t arm64_dma_phys_limit; +#define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1) #endif /* __KERNEL__ */ struct debug_info { diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 0a24b9b8c6982d..58e0c2bdde0422 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -348,8 +348,6 @@ static struct dma_map_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, }; -extern int swiotlb_late_init_with_default_size(size_t default_size); - static int __init atomic_pool_init(void) { pgprot_t prot = __pgprot(PROT_NORMAL_NC); @@ -411,21 +409,13 @@ static int __init atomic_pool_init(void) return -ENOMEM; } -static int __init swiotlb_late_init(void) +static int __init arm64_dma_init(void) { - size_t swiotlb_size = min(SZ_64M, MAX_ORDER_NR_PAGES << PAGE_SHIFT); + int ret; dma_ops = &swiotlb_dma_ops; - return swiotlb_late_init_with_default_size(swiotlb_size); -} - -static int __init arm64_dma_init(void) -{ - int ret = 0; - - ret |= swiotlb_late_init(); - ret |= atomic_pool_init(); + ret = atomic_pool_init(); return ret; } diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 71145f952070eb..ae85da6307bb92 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -45,6 +46,7 @@ #include "mm.h" phys_addr_t memstart_addr __read_mostly = 0; +phys_addr_t arm64_dma_phys_limit __read_mostly; #ifdef CONFIG_BLK_DEV_INITRD static int __init early_initrd(char *p) @@ -85,7 +87,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max) /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) { - max_dma = PFN_DOWN(max_zone_dma_phys()); + max_dma = PFN_DOWN(arm64_dma_phys_limit); zone_size[ZONE_DMA] = max_dma - min; } zone_size[ZONE_NORMAL] = max - max_dma; @@ -156,8 +158,6 @@ early_param("mem", early_mem); void __init arm64_memblock_init(void) { - phys_addr_t dma_phys_limit = 0; - memblock_enforce_memory_limit(memory_limit); /* @@ -174,8 +174,10 @@ void __init arm64_memblock_init(void) /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) - dma_phys_limit = max_zone_dma_phys(); - dma_contiguous_reserve(dma_phys_limit); + arm64_dma_phys_limit = max_zone_dma_phys(); + else + arm64_dma_phys_limit = PHYS_MASK + 1; + dma_contiguous_reserve(arm64_dma_phys_limit); memblock_allow_resize(); memblock_dump_all(); @@ -276,6 +278,8 @@ static void __init free_unused_memmap(void) */ void __init mem_init(void) { + swiotlb_init(1); + set_max_mapnr(pfn_to_page(max_pfn) - mem_map); #ifndef CONFIG_SPARSEMEM_VMEMMAP From 9d42d48a342aee208c1154696196497fdc556bbf Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 23 Feb 2015 15:13:40 +0000 Subject: [PATCH 65/79] arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endian The native (64-bit) sigval_t union contains sival_int (32-bit) and sival_ptr (64-bit). When a compat application invokes a syscall that takes a sigval_t value (as part of a larger structure, e.g. compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t union is converted to the native sigval_t with sival_int overlapping with either the least or the most significant half of sival_ptr, depending on endianness. When the corresponding signal is delivered to a compat application, on big endian the current (compat_uptr_t)sival_ptr cast always returns 0 since sival_int corresponds to the top part of sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int is copied to the compat_siginfo_t structure. Cc: Reported-by: Bamvor Jian Zhang Tested-by: Bamvor Jian Zhang Signed-off-by: Catalin Marinas --- arch/arm64/kernel/signal32.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c index c20a300e22137f..d26fcd4cd6e621 100644 --- a/arch/arm64/kernel/signal32.c +++ b/arch/arm64/kernel/signal32.c @@ -154,8 +154,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) case __SI_TIMER: err |= __put_user(from->si_tid, &to->si_tid); err |= __put_user(from->si_overrun, &to->si_overrun); - err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, - &to->si_ptr); + err |= __put_user(from->si_int, &to->si_int); break; case __SI_POLL: err |= __put_user(from->si_band, &to->si_band); @@ -184,7 +183,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, const siginfo_t *from) case __SI_MESGQ: /* But this is */ err |= __put_user(from->si_pid, &to->si_pid); err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr); + err |= __put_user(from->si_int, &to->si_int); break; case __SI_SYS: err |= __put_user((compat_uptr_t)(unsigned long) From af4819af8db05da4753b3b74a11cb00b381247e7 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Fri, 27 Feb 2015 17:54:31 +0000 Subject: [PATCH 66/79] arm64: cpuidle: add asm/proc-fns.h inclusion ARM64 CPUidle driver requires the cpu_do_idle function so that it can be used to enter the shallowest idle state, and it is declared in asm/proc-fns.h. The current ARM64 CPUidle driver does not include asm/proc-fns.h explicitly and it has so far relied on implicit inclusion from other header files. Owing to some header dependencies reshuffling this currently triggers build failures when CONFIG_ARM64_64K_PAGES=y: drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state" drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of function "cpu_do_idle" [-Werror=implicit-function-declaration] cpu_do_idle(); ^ This patch adds the explicit inclusion of the asm/proc-fns.h header file in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed and the required header inclusion is added to the appropriate arch back-end CPUidle header, already included by the CPUidle arm64 driver, where CPUidle arch related function declarations belong. Reported-by: Laura Abbott Signed-off-by: Lorenzo Pieralisi Acked-by: Will Deacon Tested-by: Mark Rutland Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/cpuidle.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/include/asm/cpuidle.h b/arch/arm64/include/asm/cpuidle.h index 0710654631e789..c60643f14cda97 100644 --- a/arch/arm64/include/asm/cpuidle.h +++ b/arch/arm64/include/asm/cpuidle.h @@ -1,6 +1,8 @@ #ifndef __ASM_CPUIDLE_H #define __ASM_CPUIDLE_H +#include + #ifdef CONFIG_CPU_IDLE extern int cpu_init_idle(unsigned int cpu); extern int cpu_suspend(unsigned long arg); From 01945fa248ff6d34f5fdb8106118910b77b76f91 Mon Sep 17 00:00:00 2001 From: Mark Fasheh Date: Fri, 27 Feb 2015 15:51:40 -0800 Subject: [PATCH 67/79] ocfs2: update web page + git tree in documentation We (the Ocfs2 project) recently moved the location of our ocfs2-tools git tree and project web page. The pertinent discussion can be seen here: https://oss.oracle.com/pipermail/ocfs2-devel/2015-February/010579.html The following patch updates the Ocfs2 documentation in MAINTAINERS, ocfs2.txt, and dlmfs.txt. I added our new official web page, changed the location of our tools git tree and removed the link to Joel's ancient kernel git tree - Andrew has handled our patches for a while now. Signed-off-by: Mark Fasheh Cc: Joel Becker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/filesystems/dlmfs.txt | 4 ++-- Documentation/filesystems/ocfs2.txt | 4 ++-- MAINTAINERS | 3 +-- 3 files changed, 5 insertions(+), 6 deletions(-) diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index 1b528b2ad809b8..fcf4d509d1186f 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -5,8 +5,8 @@ system. dlmfs is built with OCFS2 as it requires most of its infrastructure. -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools web page: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 28f8c08201e29e..4c49e5410595c0 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -8,8 +8,8 @@ also make it attractive for non-clustered use. You'll want to install the ocfs2-tools package in order to at least get "mount.ocfs2" and "ocfs2_hb_ctl". -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools git tree: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/MAINTAINERS b/MAINTAINERS index ddc5a8cf9a8ac0..eaf999638a65d4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7213,8 +7213,7 @@ ORACLE CLUSTER FILESYSTEM 2 (OCFS2) M: Mark Fasheh M: Joel Becker L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers) -W: http://oss.oracle.com/projects/ocfs2/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git +W: http://ocfs2.wiki.kernel.org S: Supported F: Documentation/filesystems/ocfs2.txt F: Documentation/filesystems/dlmfs.txt From da616534ed7f6e8ffaab699258b55c8d78d0b4ea Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Fri, 27 Feb 2015 15:51:43 -0800 Subject: [PATCH 68/79] mm/nommu: fix memory leak Maxime reported the following memory leak regression due to commit dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). On v3.19, I am facing a memory leak. Each time I run a command one page is lost. Here an example with busybox's free command: / # free total used free shared buffers cached Mem: 7928 1972 5956 0 0 492 -/+ buffers/cache: 1480 6448 / # free total used free shared buffers cached Mem: 7928 1976 5952 0 0 492 -/+ buffers/cache: 1484 6444 / # free total used free shared buffers cached Mem: 7928 1980 5948 0 0 492 -/+ buffers/cache: 1488 6440 / # free total used free shared buffers cached Mem: 7928 1984 5944 0 0 492 -/+ buffers/cache: 1492 6436 / # free total used free shared buffers cached Mem: 7928 1988 5940 0 0 492 -/+ buffers/cache: 1496 6432 At some point, the system fails to sastisfy 256KB allocations: free: page allocation failure: order:6, mode:0xd0 CPU: 0 PID: 67 Comm: free Not tainted 3.19.0-05389-gacf2cf1-dirty #64 Hardware name: STM32 (Device Tree Support) show_stack+0xb/0xc warn_alloc_failed+0x97/0xbc __alloc_pages_nodemask+0x295/0x35c __get_free_pages+0xb/0x24 alloc_pages_exact+0x19/0x24 do_mmap_pgoff+0x423/0x658 vm_mmap_pgoff+0x3f/0x4e load_flat_file+0x20d/0x4f8 load_flat_binary+0x3f/0x26c search_binary_handler+0x51/0xe4 do_execveat_common+0x271/0x35c do_execve+0x19/0x1c ret_fast_syscall+0x1/0x4a Mem-info: Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages 2048 pages of RAM 1538 free pages 66 reserved pages 109 slab pages -46 pages shared 0 pages swap cached nommu: Allocation of length 221184 from process 67 (free) failed Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages Unable to allocate RAM for process text/data, errno 12 SEGV This problem happens because we allocate ordered page through __get_free_pages() in do_mmap_private() in some cases and we try to free individual pages rather than ordered page in free_page_series(). In this case, freeing pages whose refcount is not 0 won't be freed to the page allocator so memory leak happens. To fix the problem, this patch changes __get_free_pages() to alloc_pages_exact() since alloc_pages_exact() returns physically-contiguous pages but each pages are refcounted. Fixes: dbc8358c7237 ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). Reported-by: Maxime Coquelin Tested-by: Maxime Coquelin Signed-off-by: Joonsoo Kim Cc: [3.19] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/nommu.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/mm/nommu.c b/mm/nommu.c index 7296360fc057e5..3e67e7538ecf04 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1213,11 +1213,9 @@ static int do_mmap_private(struct vm_area_struct *vma, if (sysctl_nr_trim_pages && total - point >= sysctl_nr_trim_pages) { total = point; kdebug("try to alloc exact %lu pages", total); - base = alloc_pages_exact(len, GFP_KERNEL); - } else { - base = (void *)__get_free_pages(GFP_KERNEL, order); } + base = alloc_pages_exact(total << PAGE_SHIFT, GFP_KERNEL); if (!base) goto enomem; From 4e54dede38b45052a941bcf709f7d29f2e18174d Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Fri, 27 Feb 2015 15:51:46 -0800 Subject: [PATCH 69/79] memcg: fix low limit calculation A memcg is considered low limited even when the current usage is equal to the low limit. This leads to interesting side effects e.g. groups/hierarchies with no memory accounted are considered protected and so the reclaim will emit MEMCG_LOW event when encountering them. Another and much bigger issue was reported by Joonsoo Kim. He has hit a NULL ptr dereference with the legacy cgroup API which even doesn't have low limit exposed. The limit is 0 by default but the initial check fails for memcg with 0 consumption and parent_mem_cgroup() would return NULL if use_hierarchy is 0 and so page_counter_read would try to dereference NULL. I suppose that the current implementation is just an overlook because the documentation in Documentation/cgroups/unified-hierarchy.txt says: "The memory.low boundary on the other hand is a top-down allocated reserve. A cgroup enjoys reclaim protection when it and all its ancestors are below their low boundaries" Fix the usage and the low limit comparision in mem_cgroup_low accordingly. Fixes: 241994ed8649 (mm: memcontrol: default hierarchy interface for memory) Reported-by: Joonsoo Kim Signed-off-by: Michal Hocko Acked-by: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index d18d3a6e7337d9..76c5a1b1dd2188 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5426,7 +5426,7 @@ bool mem_cgroup_low(struct mem_cgroup *root, struct mem_cgroup *memcg) if (memcg == root_mem_cgroup) return false; - if (page_counter_read(&memcg->memory) > memcg->low) + if (page_counter_read(&memcg->memory) >= memcg->low) return false; while (memcg != root) { @@ -5435,7 +5435,7 @@ bool mem_cgroup_low(struct mem_cgroup *root, struct mem_cgroup *memcg) if (memcg == root_mem_cgroup) break; - if (page_counter_read(&memcg->memory) > memcg->low) + if (page_counter_read(&memcg->memory) >= memcg->low) return false; } return true; From 682354d4e0bf9a28f11b52ef9be7fb38b901bd5c Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 27 Feb 2015 15:51:48 -0800 Subject: [PATCH 70/79] rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build error The newly added ds1685 driver causes a build error when enabled without CONFIG_RTC_INTF_DEV: drivers/rtc/rtc-ds1685.c:919:22: error: 'ds1685_rtc_alarm_irq_enable' undeclared here (not in a function) .alarm_irq_enable = ds1685_rtc_alarm_irq_enable, Apparently the driver was incorrectly changed to reflect the interface change from 16380c153a69c ("RTC: Convert rtc drivers to use the alarm_irq_enable method"), which removed the respective #ifdef from all other rtc drivers. This does the same change that was merged for the other drivers before and removes the #ifdef, allowing the interrupts to be enabled through the in-kernel rtc interface independent of the existence of /dev/rtc. Fixes: aaaf5fbf56f ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Arnd Bergmann Acked-by: Joshua Kinard Cc: Ralf Baechle Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1685.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c index 8c3bfcb115b787..5dc1ef9d0008ae 100644 --- a/drivers/rtc/rtc-ds1685.c +++ b/drivers/rtc/rtc-ds1685.c @@ -528,7 +528,6 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) /* ----------------------------------------------------------------------- */ /* /dev/rtcX Interface functions */ -#ifdef CONFIG_RTC_INTF_DEV /** * ds1685_rtc_alarm_irq_enable - replaces ioctl() RTC_AIE on/off. * @dev: pointer to device structure. @@ -557,7 +556,6 @@ ds1685_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -#endif /* ----------------------------------------------------------------------- */ From 39ea34cc07fb1ca8059239290967e006bbdacceb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 27 Feb 2015 15:51:51 -0800 Subject: [PATCH 71/79] rtc: ds1685: remove superfluous checks for out-of-range u8 values drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_read_alarm': drivers/rtc/rtc-ds1685.c:402: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:409: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:416: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_set_alarm': drivers/rtc/rtc-ds1685.c:475: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:478: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:481: warning: comparison is always true due to limited range of data type u8 cannot contain a value larger than 0xff, hence drop the checks. Wrapping the checks in unlikely() indicated some sense of humor, though ;-) Signed-off-by: Geert Uytterhoeven Acked-by: Joshua Kinard Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1685.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c index 5dc1ef9d0008ae..29b461c76072c7 100644 --- a/drivers/rtc/rtc-ds1685.c +++ b/drivers/rtc/rtc-ds1685.c @@ -399,21 +399,21 @@ ds1685_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) * of this RTC chip. We check for it anyways in case support is * added in the future. */ - if (unlikely((seconds >= 0xc0) && (seconds <= 0xff))) + if (unlikely(seconds >= 0xc0)) alrm->time.tm_sec = -1; else alrm->time.tm_sec = ds1685_rtc_bcd2bin(rtc, seconds, RTC_SECS_BCD_MASK, RTC_SECS_BIN_MASK); - if (unlikely((minutes >= 0xc0) && (minutes <= 0xff))) + if (unlikely(minutes >= 0xc0)) alrm->time.tm_min = -1; else alrm->time.tm_min = ds1685_rtc_bcd2bin(rtc, minutes, RTC_MINS_BCD_MASK, RTC_MINS_BIN_MASK); - if (unlikely((hours >= 0xc0) && (hours <= 0xff))) + if (unlikely(hours >= 0xc0)) alrm->time.tm_hour = -1; else alrm->time.tm_hour = ds1685_rtc_bcd2bin(rtc, hours, @@ -472,13 +472,13 @@ ds1685_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) * field, and we only support four fields. We put the support * here anyways for the future. */ - if (unlikely((seconds >= 0xc0) && (seconds <= 0xff))) + if (unlikely(seconds >= 0xc0)) seconds = 0xff; - if (unlikely((minutes >= 0xc0) && (minutes <= 0xff))) + if (unlikely(minutes >= 0xc0)) minutes = 0xff; - if (unlikely((hours >= 0xc0) && (hours <= 0xff))) + if (unlikely(hours >= 0xc0)) hours = 0xff; alrm->time.tm_mon = -1; From 586a1a125eb157f0c2b9925ba878f24f4fe0c667 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 27 Feb 2015 15:51:53 -0800 Subject: [PATCH 72/79] scripts/gdb: add empty package initialization script This got lost during the initial merge process: Python requires an __init__.py script, even if empty, in order to accept a directory as package. Add it, this time as a non-empty file. Signed-off-by: Jan Kiszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/gdb/linux/__init__.py | 1 + 1 file changed, 1 insertion(+) create mode 100644 scripts/gdb/linux/__init__.py diff --git a/scripts/gdb/linux/__init__.py b/scripts/gdb/linux/__init__.py new file mode 100644 index 00000000000000..4680fb176337ba --- /dev/null +++ b/scripts/gdb/linux/__init__.py @@ -0,0 +1 @@ +# nothing to do for the initialization of this package From 957ed60b53b519064a54988c4e31e0087e47d091 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 27 Feb 2015 15:51:56 -0800 Subject: [PATCH 73/79] nilfs2: fix potential memory overrun on inode Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/btree.c | 47 ++++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 3 deletions(-) diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index b2e3ff34762070..ecdbae19a766d9 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -31,6 +31,8 @@ #include "alloc.h" #include "dat.h" +static void __nilfs_btree_init(struct nilfs_bmap *bmap); + static struct nilfs_btree_path *nilfs_btree_alloc_path(void) { struct nilfs_btree_path *path; @@ -368,6 +370,34 @@ static int nilfs_btree_node_broken(const struct nilfs_btree_node *node, return ret; } +/** + * nilfs_btree_root_broken - verify consistency of btree root node + * @node: btree root node to be examined + * @ino: inode number + * + * Return Value: If node is broken, 1 is returned. Otherwise, 0 is returned. + */ +static int nilfs_btree_root_broken(const struct nilfs_btree_node *node, + unsigned long ino) +{ + int level, flags, nchildren; + int ret = 0; + + level = nilfs_btree_node_get_level(node); + flags = nilfs_btree_node_get_flags(node); + nchildren = nilfs_btree_node_get_nchildren(node); + + if (unlikely(level < NILFS_BTREE_LEVEL_NODE_MIN || + level > NILFS_BTREE_LEVEL_MAX || + nchildren < 0 || + nchildren > NILFS_BTREE_ROOT_NCHILDREN_MAX)) { + pr_crit("NILFS: bad btree root (inode number=%lu): level = %d, flags = 0x%x, nchildren = %d\n", + ino, level, flags, nchildren); + ret = 1; + } + return ret; +} + int nilfs_btree_broken_node_block(struct buffer_head *bh) { int ret; @@ -1713,7 +1743,7 @@ nilfs_btree_commit_convert_and_insert(struct nilfs_bmap *btree, /* convert and insert */ dat = NILFS_BMAP_USE_VBN(btree) ? nilfs_bmap_get_dat(btree) : NULL; - nilfs_btree_init(btree); + __nilfs_btree_init(btree); if (nreq != NULL) { nilfs_bmap_commit_alloc_ptr(btree, dreq, dat); nilfs_bmap_commit_alloc_ptr(btree, nreq, dat); @@ -2294,12 +2324,23 @@ static const struct nilfs_bmap_operations nilfs_btree_ops_gc = { .bop_gather_data = NULL, }; -int nilfs_btree_init(struct nilfs_bmap *bmap) +static void __nilfs_btree_init(struct nilfs_bmap *bmap) { bmap->b_ops = &nilfs_btree_ops; bmap->b_nchildren_per_block = NILFS_BTREE_NODE_NCHILDREN_MAX(nilfs_btree_node_size(bmap)); - return 0; +} + +int nilfs_btree_init(struct nilfs_bmap *bmap) +{ + int ret = 0; + + __nilfs_btree_init(bmap); + + if (nilfs_btree_root_broken(nilfs_btree_get_root(bmap), + bmap->b_inode->i_ino)) + ret = -EIO; + return ret; } void nilfs_btree_init_gc(struct nilfs_bmap *bmap) From b00eeaedece2e8cb1607cb015f10e572e2607c49 Mon Sep 17 00:00:00 2001 From: Joshua Kinard Date: Fri, 27 Feb 2015 15:51:59 -0800 Subject: [PATCH 74/79] drivers/rtc/rtc-ds1685.c: fix conditional in ds1685_rtc_sysfs_time_regs_{show,store} Fix a conditional statement checking for NULL in both ds1685_rtc_sysfs_time_regs_show and ds1685_rtc_sysfs_time_regs_store that was using a logical AND when it should be using a logical OR so that we fail out of the function properly if the condition ever evaluates to true. Fixes: aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Joshua Kinard Reported-by: Dan Carpenter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1685.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-ds1685.c b/drivers/rtc/rtc-ds1685.c index 29b461c76072c7..803869c7d7c206 100644 --- a/drivers/rtc/rtc-ds1685.c +++ b/drivers/rtc/rtc-ds1685.c @@ -1610,7 +1610,7 @@ ds1685_rtc_sysfs_time_regs_show(struct device *dev, ds1685_rtc_sysfs_time_regs_lookup(attr->attr.name, false); /* Make sure we actually matched something. */ - if (!bcd_reg_info && !bin_reg_info) + if (!bcd_reg_info || !bin_reg_info) return -EINVAL; /* bcd_reg_info->reg == bin_reg_info->reg. */ @@ -1648,7 +1648,7 @@ ds1685_rtc_sysfs_time_regs_store(struct device *dev, return -EINVAL; /* Make sure we actually matched something. */ - if (!bcd_reg_info && !bin_reg_info) + if (!bcd_reg_info || !bin_reg_info) return -EINVAL; /* Check for a valid range. */ From 2ea55a2caee016daee511431217861fb04767b27 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Fri, 27 Feb 2015 15:52:01 -0800 Subject: [PATCH 75/79] zram: use proper type to update max_used_pages max_used_pages is defined as atomic_long_t so we need to use unsigned long to keep temporary value for it rather than int which is smaller than unsigned long in a 64 bit system. Signed-off-by: Joonsoo Kim Cc: Minchan Kim Cc: Jerome Marchand Cc: Nitin Gupta Cc: Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/zram/zram_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 8e233edd7a097a..871bd3550cb0e0 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -528,7 +528,7 @@ static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec, static inline void update_used_max(struct zram *zram, const unsigned long pages) { - int old_max, cur_max; + unsigned long old_max, cur_max; old_max = atomic_long_read(&zram->stats.max_used_pages); From d2973697b377e8b061e179c6057e94151759a73d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 27 Feb 2015 15:52:04 -0800 Subject: [PATCH 76/79] mm: memcontrol: use "max" instead of "infinity" in control knobs The memcg control knobs indicate the highest possible value using the symbolic name "infinity", which is long and awkward to type. Switch to the string "max", which is just as descriptive but shorter and sweeter. This changes a user interface, so do it before the release and before the development flag is dropped from the default hierarchy. Signed-off-by: Johannes Weiner Cc: Michal Hocko Cc: Tejun Heo Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/cgroups/unified-hierarchy.txt | 4 ++-- mm/memcontrol.c | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt index 71daa35ec2d920..eb102fb7221347 100644 --- a/Documentation/cgroups/unified-hierarchy.txt +++ b/Documentation/cgroups/unified-hierarchy.txt @@ -404,8 +404,8 @@ supported and the interface files "release_agent" and be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not consistent. - memory.low, memory.high, and memory.max will use the string - "infinity" to indicate and set the highest possible value. + memory.low, memory.high, and memory.max will use the string "max" to + indicate and set the highest possible value. 5. Planned Changes diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 76c5a1b1dd2188..9fe07692eaad04 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -5247,7 +5247,7 @@ static int memory_low_show(struct seq_file *m, void *v) unsigned long low = ACCESS_ONCE(memcg->low); if (low == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)low * PAGE_SIZE); @@ -5262,7 +5262,7 @@ static ssize_t memory_low_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &low); + err = page_counter_memparse(buf, "max", &low); if (err) return err; @@ -5277,7 +5277,7 @@ static int memory_high_show(struct seq_file *m, void *v) unsigned long high = ACCESS_ONCE(memcg->high); if (high == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)high * PAGE_SIZE); @@ -5292,7 +5292,7 @@ static ssize_t memory_high_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &high); + err = page_counter_memparse(buf, "max", &high); if (err) return err; @@ -5307,7 +5307,7 @@ static int memory_max_show(struct seq_file *m, void *v) unsigned long max = ACCESS_ONCE(memcg->memory.limit); if (max == PAGE_COUNTER_MAX) - seq_puts(m, "infinity\n"); + seq_puts(m, "max\n"); else seq_printf(m, "%llu\n", (u64)max * PAGE_SIZE); @@ -5322,7 +5322,7 @@ static ssize_t memory_max_write(struct kernfs_open_file *of, int err; buf = strstrip(buf); - err = page_counter_memparse(buf, "infinity", &max); + err = page_counter_memparse(buf, "max", &max); if (err) return err; From 39afb5ee4640b4ed2cdd9e12b2a67cf785cfced8 Mon Sep 17 00:00:00 2001 From: Jon DeVree Date: Fri, 27 Feb 2015 15:52:07 -0800 Subject: [PATCH 77/79] kernel/sys.c: fix UNAME26 for 4.0 There's a uname workaround for broken userspace which can't handle kernel versions of 3.x. Update it for 4.x. Signed-off-by: Jon DeVree Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sys.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sys.c b/kernel/sys.c index 667b2e62fad25b..a03d9cd23ed779 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1108,6 +1108,7 @@ DECLARE_RWSEM(uts_sem); /* * Work around broken programs that cannot handle "Linux 3.0". * Instead we map 3.x to 2.6.40+x, so e.g. 3.0 would be 2.6.40 + * And we map 4.x to 2.6.60+x, so 4.0 would be 2.6.60. */ static int override_release(char __user *release, size_t len) { @@ -1127,7 +1128,7 @@ static int override_release(char __user *release, size_t len) break; rest++; } - v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 40; + v = ((LINUX_VERSION_CODE >> 8) & 0xff) + 60; copy = clamp_t(size_t, len, 1, sizeof(buf)); copy = scnprintf(buf, copy, "2.6.%u%s", v, rest); ret = copy_to_user(release, buf, copy + 1); From cc87317726f851531ae8422e0c2d3d6e2d7b1955 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 27 Feb 2015 15:52:09 -0800 Subject: [PATCH 78/79] mm: page_alloc: revert inadvertent !__GFP_FS retry behavior change Historically, !__GFP_FS allocations were not allowed to invoke the OOM killer once reclaim had failed, but nevertheless kept looping in the allocator. Commit 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into allocation slowpath"), which should have been a simple cleanup patch, accidentally changed the behavior to aborting the allocation at that point. This creates problems with filesystem callers (?) that currently rely on the allocator waiting for other tasks to intervene. Revert the behavior as it shouldn't have been changed as part of a cleanup patch. Fixes: 9879de7373fc ("mm: page_alloc: embed OOM killing naturally into allocation slowpath") Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Reported-by: Tetsuo Handa Cc: Theodore Ts'o Cc: Dave Chinner Acked-by: David Rientjes Cc: Oleg Nesterov Cc: Mel Gorman Cc: [3.19.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a47f0b229a1aca..7abfa70cdc1ae8 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2353,8 +2353,15 @@ __alloc_pages_may_oom(gfp_t gfp_mask, unsigned int order, if (ac->high_zoneidx < ZONE_NORMAL) goto out; /* The OOM killer does not compensate for light reclaim */ - if (!(gfp_mask & __GFP_FS)) + if (!(gfp_mask & __GFP_FS)) { + /* + * XXX: Page reclaim didn't yield anything, + * and the OOM killer can't be invoked, but + * keep looping as per should_alloc_retry(). + */ + *did_some_progress = 1; goto out; + } /* * GFP_THISNODE contains __GFP_NORETRY and we never hit this. * Sanity check for bare calls of __GFP_THISNODE, not real OOM. From c07af4f1ce413d009ea76ee69099f06f73ce75b2 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Fri, 27 Feb 2015 15:52:12 -0800 Subject: [PATCH 79/79] mm: add missing __PAGETABLE_{PUD,PMD}_FOLDED defines Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by and . But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: Kirill A. Shutemov Cc: Aaro Koskinen Cc: David Howells Cc: Geert Uytterhoeven Cc: Heiko Carstens Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Koichi Yasutake Cc: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/include/asm/pgtable.h | 2 ++ arch/m32r/include/asm/pgtable-2level.h | 1 + arch/m68k/include/asm/pgtable_mm.h | 2 ++ arch/mn10300/include/asm/pgtable.h | 2 ++ arch/parisc/include/asm/pgtable.h | 1 + arch/s390/include/asm/pgtable.h | 2 ++ 6 files changed, 10 insertions(+) diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index 93bcf2abd1a15d..07d7a7ef8bd59c 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -123,12 +123,14 @@ extern unsigned long empty_zero_page; #define PGDIR_MASK (~(PGDIR_SIZE - 1)) #define PTRS_PER_PGD 64 +#define __PAGETABLE_PUD_FOLDED #define PUD_SHIFT 26 #define PTRS_PER_PUD 1 #define PUD_SIZE (1UL << PUD_SHIFT) #define PUD_MASK (~(PUD_SIZE - 1)) #define PUE_SIZE 256 +#define __PAGETABLE_PMD_FOLDED #define PMD_SHIFT 26 #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE - 1)) diff --git a/arch/m32r/include/asm/pgtable-2level.h b/arch/m32r/include/asm/pgtable-2level.h index 8fd8ee70266a13..421e6ba3a17379 100644 --- a/arch/m32r/include/asm/pgtable-2level.h +++ b/arch/m32r/include/asm/pgtable-2level.h @@ -13,6 +13,7 @@ * the M32R is two-level, so we don't really have any * PMD directory physically. */ +#define __PAGETABLE_PMD_FOLDED #define PMD_SHIFT 22 #define PTRS_PER_PMD 1 diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index 28a145bfbb7151..35ed4a9981aefb 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -54,10 +54,12 @@ */ #ifdef CONFIG_SUN3 #define PTRS_PER_PTE 16 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 2048 #elif defined(CONFIG_COLDFIRE) #define PTRS_PER_PTE 512 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PMD 1 #define PTRS_PER_PGD 1024 #else diff --git a/arch/mn10300/include/asm/pgtable.h b/arch/mn10300/include/asm/pgtable.h index afab728ab65ecd..96d3f9deb59c38 100644 --- a/arch/mn10300/include/asm/pgtable.h +++ b/arch/mn10300/include/asm/pgtable.h @@ -56,7 +56,9 @@ extern void paging_init(void); #define PGDIR_SHIFT 22 #define PTRS_PER_PGD 1024 #define PTRS_PER_PUD 1 /* we don't really have any PUD physically */ +#define __PAGETABLE_PUD_FOLDED #define PTRS_PER_PMD 1 /* we don't really have any PMD physically */ +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PTE 1024 #define PGD_SIZE PAGE_SIZE diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h index 8c966b2270aa66..15207b9362bfd0 100644 --- a/arch/parisc/include/asm/pgtable.h +++ b/arch/parisc/include/asm/pgtable.h @@ -96,6 +96,7 @@ extern void purge_tlb_entries(struct mm_struct *, unsigned long); #if PT_NLEVELS == 3 #define BITS_PER_PMD (PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY) #else +#define __PAGETABLE_PMD_FOLDED #define BITS_PER_PMD 0 #endif #define PTRS_PER_PMD (1UL << BITS_PER_PMD) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index fbb5ee3ae57c6d..e08ec38f8c6eb7 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -91,7 +91,9 @@ extern unsigned long zero_page_mask; */ #define PTRS_PER_PTE 256 #ifndef CONFIG_64BIT +#define __PAGETABLE_PUD_FOLDED #define PTRS_PER_PMD 1 +#define __PAGETABLE_PMD_FOLDED #define PTRS_PER_PUD 1 #else /* CONFIG_64BIT */ #define PTRS_PER_PMD 2048