Test DROP_WHEN_FULL parameter

Signed-off-by: Alex Forencich <[email protected]>

Author: alexforencich

tb/axis_async_fifo/test_axis_async_fifo.py

@@ -465,18 +465,36 @@ async def run_test_overflow(dut):
     for k in range(count):
         await tb.source.send(test_frame)
 
-    for k in range((depth//byte_lanes)*2):
+    for k in range((depth//byte_lanes)*3):
         await RisingEdge(dut.s_clk)
 
-    assert not tb.source.idle()
+    if dut.DROP_WHEN_FULL.value:
+        assert tb.source.idle()
+    else:
+        assert not tb.source.idle()
 
     tb.sink.pause = False
 
-    for k in range(count):
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        for k in range((depth//byte_lanes)*3):
+            await RisingEdge(dut.s_clk)
 
-        assert rx_frame.tdata == test_data
-        assert not rx_frame.tuser
+        rx_count = 0
+
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
+
+        assert rx_count < count
+
+    else:
+        for k in range(count):
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -548,13 +566,32 @@ async def run_stress_test(dut, idle_inserter=None, backpressure_inserter=None):
 
         cur_id = (cur_id + 1) % id_count
 
-    for test_frame in test_frames:
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        cycles = 0
+        while cycles < 100:
+            cycles += 1
+            if not tb.source.idle() or dut.s_axis_tvalid.value.integer or dut.m_axis_tvalid.value.integer or dut.m_status_depth.value.integer:
+                cycles = 0
+            await RisingEdge(dut.m_clk)
 
-        assert rx_frame.tdata == test_frame.tdata
-        assert rx_frame.tid == test_frame.tid
-        assert rx_frame.tdest == test_frame.tdest
-        assert not rx_frame.tuser
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            while True:
+                test_frame = test_frames.pop(0)
+                if not rx_frame.tuser and rx_frame.tid == test_frame.tid and rx_frame.tdest == test_frame.tdest and rx_frame.tdata == test_frame.tdata:
+                    break
+
+        assert len(test_frames) < 512
+
+    else:
+        for test_frame in test_frames:
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_frame.tdata
+            assert rx_frame.tid == test_frame.tid
+            assert rx_frame.tdest == test_frame.tdest
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -617,7 +654,7 @@ def incrementing_payload(length):
 
 @pytest.mark.parametrize(("s_clk", "m_clk"), [(10, 10), (10, 11), (11, 10)])
 @pytest.mark.parametrize(("frame_fifo", "drop_oversize_frame", "drop_bad_frame", "drop_when_full"),
-    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0)])
+    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0), (1, 1, 1, 1)])
 @pytest.mark.parametrize(("ram_pipeline", "output_fifo"),
     [(0, 0), (1, 0), (4, 0), (0, 1), (1, 1), (4, 1)])
 @pytest.mark.parametrize("data_width", [8, 16, 32, 64])

tb/axis_async_fifo_adapter/test_axis_async_fifo_adapter.py

@@ -462,18 +462,36 @@ async def run_test_overflow(dut):
     for k in range(count):
         await tb.source.send(test_frame)
 
-    for k in range((depth//byte_lanes)*2):
+    for k in range((depth//byte_lanes)*3):
         await RisingEdge(dut.s_clk)
 
-    assert not tb.source.idle()
+    if dut.DROP_WHEN_FULL.value:
+        assert tb.source.idle()
+    else:
+        assert not tb.source.idle()
 
     tb.sink.pause = False
 
-    for k in range(count):
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        for k in range((depth//byte_lanes)*3):
+            await RisingEdge(dut.s_clk)
 
-        assert rx_frame.tdata == test_data
-        assert not rx_frame.tuser
+        rx_count = 0
+
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
+
+        assert rx_count < count
+
+    else:
+        for k in range(count):
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -545,13 +563,32 @@ async def run_stress_test(dut, idle_inserter=None, backpressure_inserter=None):
 
         cur_id = (cur_id + 1) % id_count
 
-    for test_frame in test_frames:
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        cycles = 0
+        while cycles < 100:
+            cycles += 1
+            if not tb.source.idle() or dut.s_axis_tvalid.value.integer or dut.m_axis_tvalid.value.integer or dut.m_status_depth.value.integer:
+                cycles = 0
+            await RisingEdge(dut.m_clk)
 
-        assert rx_frame.tdata == test_frame.tdata
-        assert rx_frame.tid == test_frame.tid
-        assert rx_frame.tdest == test_frame.tdest
-        assert not rx_frame.tuser
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            while True:
+                test_frame = test_frames.pop(0)
+                if not rx_frame.tuser and rx_frame.tid == test_frame.tid and rx_frame.tdest == test_frame.tdest and rx_frame.tdata == test_frame.tdata:
+                    break
+
+        assert len(test_frames) < 512
+
+    else:
+        for test_frame in test_frames:
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_frame.tdata
+            assert rx_frame.tid == test_frame.tid
+            assert rx_frame.tdest == test_frame.tdest
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -613,7 +650,7 @@ def incrementing_payload(length):
 
 
 @pytest.mark.parametrize(("frame_fifo", "drop_oversize_frame", "drop_bad_frame", "drop_when_full"),
-    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0)])
+    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0), (1, 1, 1, 1)])
 @pytest.mark.parametrize("m_data_width", [8, 16, 32])
 @pytest.mark.parametrize("s_data_width", [8, 16, 32])
 def test_axis_async_fifo_adapter(request, s_data_width, m_data_width, frame_fifo, drop_oversize_frame, drop_bad_frame, drop_when_full):

tb/axis_fifo/test_axis_fifo.py

@@ -251,18 +251,36 @@ async def run_test_overflow(dut):
     for k in range(count):
         await tb.source.send(test_frame)
 
-    for k in range((depth//byte_lanes)*2):
+    for k in range((depth//byte_lanes)*3):
         await RisingEdge(dut.clk)
 
-    assert not tb.source.idle()
+    if dut.DROP_WHEN_FULL.value:
+        assert tb.source.idle()
+    else:
+        assert not tb.source.idle()
 
     tb.sink.pause = False
 
-    for k in range(count):
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        for k in range((depth//byte_lanes)*3):
+            await RisingEdge(dut.clk)
 
-        assert rx_frame.tdata == test_data
-        assert not rx_frame.tuser
+        rx_count = 0
+
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
+
+        assert rx_count < count
+
+    else:
+        for k in range(count):
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -334,13 +352,34 @@ async def run_stress_test(dut, idle_inserter=None, backpressure_inserter=None):
 
         cur_id = (cur_id + 1) % id_count
 
-    for test_frame in test_frames:
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        cycles = 0
+        while cycles < 100:
+            cycles += 1
+            if not tb.source.idle() or dut.s_axis_tvalid.value.integer or dut.m_axis_tvalid.value.integer or dut.status_depth.value.integer:
+                cycles = 0
+            await RisingEdge(dut.clk)
 
-        assert rx_frame.tdata == test_frame.tdata
-        assert rx_frame.tid == test_frame.tid
-        assert rx_frame.tdest == test_frame.tdest
-        assert not rx_frame.tuser
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            assert len(test_frames) > 0
+
+            while True:
+                test_frame = test_frames.pop(0)
+                if not rx_frame.tuser and rx_frame.tid == test_frame.tid and rx_frame.tdest == test_frame.tdest and rx_frame.tdata == test_frame.tdata:
+                    break
+
+        assert len(test_frames) < 512
+
+    else:
+        for test_frame in test_frames:
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_frame.tdata
+            assert rx_frame.tid == test_frame.tid
+            assert rx_frame.tdest == test_frame.tdest
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -396,7 +435,7 @@ def incrementing_payload(length):
 
 
 @pytest.mark.parametrize(("frame_fifo", "drop_oversize_frame", "drop_bad_frame", "drop_when_full"),
-    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0)])
+    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0), (1, 1, 1, 1)])
 @pytest.mark.parametrize(("ram_pipeline", "output_fifo"),
     [(0, 0), (1, 0), (4, 0), (0, 1), (1, 1), (4, 1)])
 @pytest.mark.parametrize("data_width", [8, 16, 32, 64])

tb/axis_fifo_adapter/test_axis_fifo_adapter.py

@@ -251,18 +251,36 @@ async def run_test_overflow(dut):
     for k in range(count):
         await tb.source.send(test_frame)
 
-    for k in range((depth//byte_lanes)*2):
+    for k in range((depth//byte_lanes)*3):
         await RisingEdge(dut.clk)
 
-    assert not tb.source.idle()
+    if dut.DROP_WHEN_FULL.value:
+        assert tb.source.idle()
+    else:
+        assert not tb.source.idle()
 
     tb.sink.pause = False
 
-    for k in range(count):
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        for k in range((depth//byte_lanes)*3):
+            await RisingEdge(dut.clk)
 
-        assert rx_frame.tdata == test_data
-        assert not rx_frame.tuser
+        rx_count = 0
+
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
+
+        assert rx_count < count
+
+    else:
+        for k in range(count):
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_data
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -334,13 +352,32 @@ async def run_stress_test(dut, idle_inserter=None, backpressure_inserter=None):
 
         cur_id = (cur_id + 1) % id_count
 
-    for test_frame in test_frames:
-        rx_frame = await tb.sink.recv()
+    if dut.DROP_WHEN_FULL.value:
+        cycles = 0
+        while cycles < 100:
+            cycles += 1
+            if not tb.source.idle() or dut.s_axis_tvalid.value.integer or dut.m_axis_tvalid.value.integer or dut.status_depth.value.integer:
+                cycles = 0
+            await RisingEdge(dut.clk)
 
-        assert rx_frame.tdata == test_frame.tdata
-        assert rx_frame.tid == test_frame.tid
-        assert rx_frame.tdest == test_frame.tdest
-        assert not rx_frame.tuser
+        while not tb.sink.empty():
+            rx_frame = await tb.sink.recv()
+
+            while True:
+                test_frame = test_frames.pop(0)
+                if not rx_frame.tuser and rx_frame.tid == test_frame.tid and rx_frame.tdest == test_frame.tdest and rx_frame.tdata == test_frame.tdata:
+                    break
+
+        assert len(test_frames) < 512
+
+    else:
+        for test_frame in test_frames:
+            rx_frame = await tb.sink.recv()
+
+            assert rx_frame.tdata == test_frame.tdata
+            assert rx_frame.tid == test_frame.tid
+            assert rx_frame.tdest == test_frame.tdest
+            assert not rx_frame.tuser
 
     assert tb.sink.empty()
 
@@ -396,7 +433,7 @@ def incrementing_payload(length):
 
 
 @pytest.mark.parametrize(("frame_fifo", "drop_oversize_frame", "drop_bad_frame", "drop_when_full"),
-    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0)])
+    [(0, 0, 0, 0), (1, 0, 0, 0), (1, 1, 0, 0), (1, 1, 1, 0), (1, 1, 1, 1)])
 @pytest.mark.parametrize("m_data_width", [8, 16, 32])
 @pytest.mark.parametrize("s_data_width", [8, 16, 32])
 def test_axis_fifo_adapter(request, s_data_width, m_data_width, frame_fifo, drop_oversize_frame, drop_bad_frame, drop_when_full):